scholarly journals Self-Evaporation Dynamics of Quantum Droplets in a 41K-87Rb Mixture

2021 ◽  
Vol 11 (2) ◽  
pp. 866
Author(s):  
Chiara Fort ◽  
Michele Modugno

We theoretically investigate the self-evaporation dynamics of quantum droplets in a 41K-87Rb mixture, in free-space. The dynamical formation of the droplet and the effects related to the presence of three-body losses are analyzed by means of numerical simulations. We identify a regime of parameters allowing for the observation of the droplet self-evaporation in a feasible experimental setup.

2019 ◽  
Vol 23 (6) ◽  
pp. 1169-1190
Author(s):  
Hemeng Zhang ◽  
Kyuro Sasaki ◽  
Xiaoming Zhang ◽  
Yuichi Sugai ◽  
Yongjun Wang

1998 ◽  
Vol 184 ◽  
pp. 485-486
Author(s):  
H. Fukuda ◽  
A. Habe ◽  
K. Wada

Nuclear activities in galaxies, such as nuclear starbursts or AGNs, are supposed to be induced by gas fueling into nuclear regions of galaxies. Non-axisymmetric gravitational potential caused by a stellar bar is a convincing mechanism for triggering gas fueling (Phinney 1994). However, numerical simulations have shown that the bar can not force the gas to accrete toward the galactic center beyond the inner Lindblad resonance (ILR). As a mechanism to overcome the ILR barrier, the double barred structure (Friedli & Martinet 1993), or the self-gravity of gas (Wada & Habe 1992, 1995; Elmegreen 1994) are proposed.


Author(s):  
Mark McLellan ◽  
Mingxuan Fan ◽  
Z. C. Feng

We propose a mechanical model for a capsule containing a piezoelectric actuator. The interfacial interaction between the capsule and a surface is assumed to be viscous. Nonlinearity in the interfacial force such as shear thickening is assumed to be present. When periodic excitations are applied to the piezoelectric actuator, the capsule is shown to propel itself. The self-propulsion is confirmed through an experimental setup.


2019 ◽  
Vol 10 (1) ◽  
pp. 53 ◽  
Author(s):  
Xu Zhang ◽  
James E. Davis ◽  
Durdu Ö. Güney

Here, we present blueprints for three types of ultra-thin beam splitters based on versatile fishnet metamaterial structures at the 1.55 μ m optical communication wavelength. The thicknesses of the designed polarizing beam splitter and partially polarizing beam splitter are 1/26 of the free-space wavelength, while the thickness of the non-polarizing beam splitter is 1/13 of the free-space wavelength. Numerical simulations show that, compared to other miniaturization approaches including popular dielectric metasurfaces, metal-based metamaterial approach can provide much thinner beam splitters with reasonable performance. Such beam splitters can enable miniaturization of conventional and advanced quantum photonic systems towards higher density, scalability, and functionality.


2008 ◽  
Vol 38 (12) ◽  
pp. 2662-2684 ◽  
Author(s):  
Hitoshi Tamura ◽  
Takuji Waseda ◽  
Yasumasa Miyazawa ◽  
Kosei Komatsu

Abstract Numerical simulations were performed to investigate current-induced modulation of the spectral and statistical properties of ocean waves advected by idealized and realistic current fields. In particular, the role of nonlinear energy transfer among waves in wave–current interactions is examined. In this type of numerical simulation, it is critical to treat the nonlinear transfer function (Snl) properly, because a rigorous Snl algorithm incurs a huge computational cost. However, the applicability of the widely used discrete interaction approximation (DIA) method is strictly limited for complex wave fields. Therefore, the simplified RIAM (SRIAM) method is implemented in an operational third-generation wave model. The method approximates an infinite resonant quadruplet with 20 optimized resonance configurations. The performance of the model is assessed by applying it to fetch-limited wave growth and wave propagation against a shear current. Numerical simulations using the idealized current field revealed that the Snl retained spectral form by redistributing the refracted wave energy; this suggests that energy concentration due to ray focusing is dispersed via the self-stabilization effect of nonlinear transfer. A hindcast simulation using wind and current reanalysis data indicated that the difference in the average monthly wave height was substantial and that instantaneous wave–current interactions were highly sensitive to small current structures. Spectral shape was also modulated, and the spatial distributions of the directional bandwidth with or without current data were completely different. Moreover, the self-stabilization effect of the Snl was also confirmed in a realistic situation. These results indicate that a realistic representation of the current field is crucial for high-resolution wave forecasting.


2008 ◽  
Vol 679 (2) ◽  
pp. 1173-1180 ◽  
Author(s):  
Scott W. Randall ◽  
Maxim Markevitch ◽  
Douglas Clowe ◽  
Anthony H. Gonzalez ◽  
Marusa Bradač

2014 ◽  
Vol 566 ◽  
pp. 50-55
Author(s):  
Minoru Nagai ◽  
Kazuaki Inaba ◽  
Kosuke Takahashi ◽  
Kikuo Kishimoto

In this study, we conducted water hammer experiments in the tube which was periodically supported by various numbers of clamps, named periodic structure, initiated by a projectile impact. The parts of the polycarbonate (PC) tube supported by 1-7 steel clamps make the tube stiffer and heavier than the original PC tube and are expected to cause a filtering effect of the frontal frequency components in the water hammer. According to our experimental observations, we confirmed that higher frequency components more than 1 kHz in the wave front were attenuated and the peak strains in circumferential direction of the tube were decreased 20% from the original PC tube. Moreover, we conducted numerical simulations of the water hammer wave similar to the experimental setup. Numerical results also revealed that frontal peak is attenuated 22% through periodic structure.


2000 ◽  
Vol 123 (2) ◽  
pp. 203-209 ◽  
Author(s):  
Krzysztof Woznica ◽  
Olivier Pennetier ◽  
Je´ro^me Renard

Submitted to a sudden and a transient loading, a metallic structure quickly evolves toward viscoplastic behavior, including high strain rates. After generalities about the specific loading and the description of the experimental setup, a numerical simulation based on the F.E.M. using an explicit scheme is presented. Three different constitutive laws are discussed: the Perzyna, the Bodner-Partom, and that of Chaboche. The identification of constitutive parameters is made using unidirectional tests on the studied material (aluminum alloy 5754). A comparison between numerical simulations and experiments shows that the method is relevant.


Sign in / Sign up

Export Citation Format

Share Document