scholarly journals Neutral-Point Voltage Balance Control of Three-Level Converter Based on Selection Method of Dynamical Adjustment for Small Voltage Vector

2021 ◽  
Vol 11 (11) ◽  
pp. 5076
Author(s):  
Hongyan Zhao ◽  
Yan Li ◽  
Fei Lin ◽  
Yian Yan
Keyword(s):  
Balance Control ◽  
Harmonic Distortion ◽  
Selection Method ◽  
Neutral Point ◽  
Voltage Vector ◽  
Unbalanced Voltage ◽  
Zero Sequence ◽  
Ac Current ◽  
Level Converter ◽  
Small Voltage

The balance control of neutral-point voltage (NPV) is important in the three-level converter. In this paper, this problem is studied by taking the VIENNA circuit as an example. The deviation of NPV is essentially caused by mismatch between the charging and discharging time of two series capacitors by the neutral-point current flowing into or out of the DC side. The unbalanced NPV will lead to unbalanced voltage stress of two capacitors and power switches and may cause overvoltage damage to both and also increase the total harmonic distortion (THD) and harmonic components in the AC current. In this paper, by analyzing the role and effect of a small-voltage vector on NPV, a control strategy based on the selection method of dynamical adjustment for a small vector is proposed. By judging the fluctuation of NPV, different small vectors are dynamically selected to act to adjust the NPV. For verification, the proposed strategy is compared with the traditional zero-sequence voltage injection (ZSV-J) method through simulation and experiment. Compared with ZSV-J, the THD of AC current is decreased by about 27.2%, the efficiency is increased by about 1.66%, and the adjustment speed of NPV is increased by about 50%. Therefore, the feasibility and advantages of the strategy are verified.

scholarly journals A Novel Neutral-Point Potential Balance Strategy for Three-Level NPC Back-to-Back Converter Based on the Neutral-Point Current Injection Model

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Yingjie Wang ◽  
Haiyuan Liu ◽  
Wenchao Wang ◽  
Kangan Wang
Keyword(s):  
Balance Control ◽  
Neutral Point ◽  
Control Algorithms ◽  
Model Based ◽  
Point Potential ◽  
Injection Model ◽  
Zero Sequence ◽  
Flow Through ◽  
Dc Bus ◽  
Zero Sequence Voltage

The neutral-point (NP) potential balance control in three-level neutral-point-clamped (NPC) back-to-back converter is a research nodus. Its current strategies are the same as the strategies of a single three-level NPC converter. But the strategies do not give full play to its advantages that the neutral-point current can only flow through the connected midlines in both sides of the converter but does not flow through the DC-bus capacitors. In this paper, firstly the NP potential model based on the NP current injected is proposed. It overcomes numerous variable constraints and mutual coupling in the conventional model based on the zero-sequence voltage injected. And then on this basis, three NP-potential balance control algorithms, unilateral control, bilateral independent control, and bilateral coordinated control, are proposed according to difference requirements. All of these algorithms use the midlines rather than the DC-bus capacitors to flow the NP current as much as possible. Their control abilities are further quantitatively analyzed and compared. Finally, simulation results verify the validity and effectiveness of these algorithms.

scholarly journals Analysis of Effective Three-Level Neutral Point Clamped Converter System for the Bipolar LVDC Distribution

Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 691 ◽  
Author(s):  
Ju-Yong Kim ◽  
Ho-Sung Kim ◽  
Ju-Won Baek ◽  
Dong-Keun Jeong
Keyword(s):  
Distribution System ◽  
Low Voltage ◽  
Balance Control ◽  
Short Circuit ◽  
Renewable Energy Sources ◽  
Neutral Point ◽  
Extreme Load ◽  
Zero Sequence ◽  
Zero Sequence Voltage ◽  
Short Circuit Condition

Low-voltage direct current (LVDC) distribution has attracted attention due to increased DC loads, the popularization of electric vehicles, energy storage systems (ESS), and renewable energy sources such as photovoltaic (PV). This paper studies a ±750 V bipolar DC distribution system and applies a 3-level neutral-point clamped (NPC) AC/DC converter for LVDC distribution. However, the 3-level NPC converter is fundamental in the neutral-point (NP) imbalance problem. This paper discusses the NP balance control method using zero-sequence voltage among various solutions to solve NP imbalance. However, since the zero-sequence voltage for NP balance control is limited, the NP voltage cannot be controlled to be balanced when extreme load differences occur. To maintain microgrid stability with bipolar LVDC distribution, it is necessary to control the NP voltage balance, even in an imbalance of extreme load. In addition, due to the bipolar LVDC distribution, the pole where a short-circuit condition occurs limits the short current until the circuit breaker operates, and a pole without a short-circuit condition must supply a stable voltage. Since the conventional 3-level NPC AC/DC converter alone cannot satisfy both functions, an additional DC/DC converter is proposed, analyzed, and verified. This paper is about a 3-level NPC AC/DC converter system for LVDC distribution. It can be used for the imbalance and short-circuit condition in bipolar LVDC distribution through the prototype of the 300 kW 3-level NPC AC/DC converter system and experimented and verified in various conditions.

scholarly journals Research on SVPWM Method and its Neutral Point Potential Control

2011 ◽  
Vol 2-3 ◽  
pp. 39-42
Author(s):  
Yan Liu ◽  
Xu Wang ◽  
Yan Xing
Keyword(s):  
Passive Control ◽  
Balance Control ◽  
Neutral Point ◽  
Superior Performance ◽  
Voltage Source ◽  
Effective Control ◽  
Potential Control ◽  
Point Potential ◽  
Voltage Vector ◽  
Three Phase

Neutral-point potential unbalance is an inherent problem of Neutral-point-clamped three-level PWM rectifiers. If the problem of neutral point can’t be controlled appropriately, the harm of input current will increase, and even the dc-link capacitor and switches will be destroyed. Thus domestic and foreign experts have done lots of research on the balance control of Neutral-point-clamed and put forward many effective control methods. This paper proposes a novel SVPWM strategy for the three-level neutral-point-clamped voltage source inverter, based on the particular disposition of all the redundant voltage vectors. The new modulation approach shows superior performance for the harmonic voltage and the control of neutral-point potential compared to the popular eight-stage centered SVPWM and realizes the balancing control of inverter neutral-point potential by modifying redundant small vectors pairs’ distribution factor accurately, only requiring the information of dc-link capacitor voltages and three-phase load currents, which is convenient to apply and is compatible of digital computer realization. The feasibility of the proposed control approach has been verified via simulation and experiment results. In the strategy of software control, domestic and foreign scholars propose numerous neutral point potential control schemes. When carrier modulation is used, the balance control is achieved by injecting zero-sequence component into the three-phase modulated wave. When space vector modulation methods are adopted, they can be divided into three categories: passive control, hysteresis control and active control. there is also a new algorithm based on the intrinsic relationship between SVPWMs for two—level inverters and three．1evel inverters．a novel SVPWM control algorithm is proposed for three．1evel．The dwell time of voltage vector for three-level inverter can be acquired from counterpart for two-level inverter by using a linear transformation．Aiming to analysis the output PWM sequence of three-level inverter, a novel classification standard of voltage vector is proposed．Based on evaluating the PWM sequences, a novel PWM sequence is given，that can reduce the total harmonics distortion of inverter output.

scholarly journals A Carrier-Based Discontinuous PWM Strategy of NPC Three-Level Inverter for Common-Mode Voltage and Switching Loss Reduction

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 3041
Author(s):  
Guozheng Zhang ◽  
Yingjie Su ◽  
Zhanqing Zhou ◽  
Qiang Geng
Keyword(s):  
Pulse Width Modulation ◽  
Control Method ◽  
Balance Control ◽  
Neutral Point ◽  
Switching Loss ◽  
Major Drawback ◽  
Common Mode ◽  
Common Mode Voltage ◽  
Zero Sequence ◽  
Zero Sequence Voltage

For the conventional carrier-based pulse width modulation (CBPWM) strategies of neutral point clamped (NPC) three-level inverters, the higher common-mode voltage (CMV) is a major drawback. However, with CMV suppression strategies, the switching loss is relatively high. In order to solve the above issue, a carrier-based discontinuous PWM (DPWM) strategy for NPC three-level inverter is proposed in this paper. Firstly, the reference voltage is modified by the twice injection of zero-sequence voltage. Switching states of the three-phase are clamped alternatively to reduce both the CMV and the switching loss. Secondly, the carriers are also modified by the phase opposite disposition of the upper and lower carriers. The extra switching at the border of two adjacent regions in the space vector diagram is reduced. Meanwhile, a neutral-point voltage (NPV) control method is also presented. The duty cycle of the switching state that affects the NPV is adjusted to obtain the balance control of the NPV. Still, the switching sequence in each carrier period remains the same. Finally, the feasibility and effectiveness of the proposed DPWM strategy are tested on a rapid control prototype platform based on RT-Lab.

Study on Selective Leakage Protection System of Mine High Voltage Grid Based on Harmonic Phase Comparison

2015 ◽  
Vol 9 (1) ◽  
pp. 253-262
Author(s):  
Liu Zhongfu ◽  
Zhang Junxing ◽  
Shi Lixin ◽  
Yang Yaning
Keyword(s):  
High Voltage ◽  
Power Supply ◽  
Power Supply System ◽  
Supply System ◽  
Neutral Point ◽  
Arc Suppression Coil ◽  
Zero Sequence ◽  
Harmonic Extraction ◽  
Power Direction ◽  
The Stability

As for the wide application of arc suppression coil to the grounding in neutral point of mine high voltage grid, grid leakage fault rules and harmonic characteristics of the neutral point grounding system through arc suppression coil are analyzed, the selective leakage protection program “zero-sequence voltage starts, fifth harmonics of grid zerosequence voltage and zero-sequence current are extracted for phase comparison” is proposed, and corresponding fifth harmonic extraction circuit and power direction discrimination circuit are designed. The experimental results show that the protective principle applies not only to the neutral point insulated power supply system, but also to the power supply system in which neutral point passes arc suppression coil, which can solve selective leakage protection problems under different neutral grounding ways, improving the reliability of selective leakage and guaranteeing the stability of the action value.

scholarly journals Performance Comparison of 2L-VSC, 3L-NPC, and 3L-MMC Converter Topologies for Interfacing Grid-Connected Systems

2021 ◽  
Author(s):  
Victor R. F. B. de Souza ◽  
Luciano S. Barros ◽  
Flavio B. Costa
Keyword(s):  
Reactive Power ◽  
Harmonic Distortion ◽  
Performance Comparison ◽  
Test Results ◽  
Multilevel Converter ◽  
Simulation Test ◽  
Comparative Performance ◽  
Higher Power ◽  
Converter Topologies ◽  
Level Converter

Nowadays, power converters play a fundamental role in the conditioning and processing of active and reactive power, and are directly related to power quality indexes. In this sense, new multi-level converter topologies have been integrated in order to provide higher power processing capacity with lower harmonic distortion, switch stress, heating, and losses. The use of these structures compared to conventional two-level converters is especially suitable for high power of the order of megawatt. Considering the relevance of this approach, this paper presents a comparative performance analysis among the conventional two-level topology (2L-VSC) and two multilevel topologies in a grid-connected system: neutral point clamped (NPC) and modular multilevel converter (MMC). Simulation test results present the impacts on voltages and currents for the switches and the whole system, as well as the evaluation of the total harmonic distortion (THD) in order to highlight the crucial points of each topology for this kind of application.

Sign in / Sign up

Export Citation Format

Share Document