scholarly journals Optimization of Composition and Technological Factors for the Lightweight Fiber-Reinforced Concrete Production on a Combined Aggregate with an Increased Coefficient of Structural Quality

2021 ◽  
Vol 11 (16) ◽  
pp. 7284
Author(s):  
Levon R. Mailyan ◽  
Alexey N. Beskopylny ◽  
Besarion Meskhi ◽  
Sergey A. Stel’makh ◽  
Evgenii M. Shcherban ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Fiber Reinforced Concrete ◽  
Structural Quality ◽  
Deformation Characteristics ◽  
Fiber Reinforced ◽  
Distribution Method ◽  
Concrete Production ◽  
Strength And Deformation ◽  
Control Composition

In recent years, developing lightweight concrete with both the necessary and sufficient strength characteristics is essential in the construction industry. This article studies the influence of the volumetric composition of lightweight fiber-reinforced concrete (LFRC) and the method of its distribution during the preparation of the fiber–concrete mixture on the strength and deformation characteristics of LFRC on a combined aggregate. The optimal grain size of the porous filler was calculated by the mathematical planning method of the experiment. Regression models of the strength and deformation characteristics on the volumetric content of fiber and its distribution method were obtained. The most effective combination of these factors has been determined. The model shows that the increase in compressive strength was 12%, the value of the prismatic strength increased by 25%, the bending tensile strength increased by 34%, and the axial tensile strength increased by 11%. The ultimate strains during axial compression decreased by 10%, axial tension decreased by 12%, and the elasticity modulus increased by 11% compared to the test results of the control composition samples without fiber and pumice. The coefficient of constructive quality (CCQ) of the LFRC on a combined aggregate compared to concrete with the control composition without fiber and pumice showed an increase of more than 32%. It was also found that fiber reinforcement with basalt fibers with a combination of heavy and porous aggregates achieves a synergistic effect together.

Effect of combined drink cans and steel fibers on the impact resistance and mechanical properties of concrete

2020 ◽  
Vol 14 (2) ◽  
pp. 6734-6742
Author(s):  
A. Syamsir ◽  
S. M. Mubin ◽  
N. M. Nor ◽  
V. Anggraini ◽  
S. Nagappan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Indirect Tensile ◽  
The Impact

This study investigated the combine effect of 0.2 % drink cans and steel fibers with volume fractions of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% to the mechanical properties and impact resistance of concrete. Hooked-end steel fiber with 30 mm and 0.75 mm length and diameter, respectively was selected for this study.  The drinks cans fiber were twisted manually in order to increase friction between fiber and concrete. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the strength performance of concrete, especially the compressive strength, flexural strength and indirect tensile strength. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the compressive strength, flexural strength and indirect tensile strength by 2.3, 7, and 2 times as compare to batch 1, respectively. Moreover, the impact resistance of fiber reinforced concrete has increase by 7 times as compared to non-fiber concretes. Moreover, the impact resistance of fiber reinforced concrete consistently gave better results as compared to non-fiber concretes. The fiber reinforced concrete turned more ductile as the dosage of fibers was increased and ductility started to decrease slightly after optimum fiber dosage was reached. It was found that concrete with combination of 2% steel and 0.2% drink cans fibers showed the highest compressive, split tensile, flexural as well as impact strength.    

Concrete and Fiber Reinforced Concrete Subjected to Impact Loading

1985 ◽  
Vol 64 ◽  
Author(s):  
Surendra P. Shah
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Basic Material ◽  
Strain History ◽  
Moderate Increase ◽  
Fiber Reinforced ◽  
The Impact

ABSTRACTDespite its extensive use, low tensile strength has been recognized as one of the major drawbacks of concrete. Although one has learned to avoid exposing concrete structures to adverse static tensile load, these cannot be shielded from short duration dynamic tensile stresses. Such loads originate from sources such as impact from missiles and projectiles, wind gusts, earthquakes and machine vibrations. The need to accurately predict the structural response and reserve capacity under such loading has led to an interest in the mechanical properties of the component materials at high rates of straining.One method to improve the resistance of concrete when subjected to impact and/or impulsive loading is by the incorporation of randomly distributed short fibers. Concrete (or Mortar) so reinforced is termed fiber reinforced concrete (FRC). Moderate increase in tensile strength and significant increases in energy absorption (toughness or impact-resistance) have been reported by several investigators in static tests on concrete reinforced with randomly distributed short steel fibers. A theoretical model to predict fracture toughness of FRC is proposed. This model is based on the concept of nonlinear elastic fracture mechanics.As yet no standard test methods are available to quantify the impact resistance of such composites, although several investigators have employed a variety of tests including drop weight, swinging pendulums and the detonation of explosives. These tests though useful in ascertaining the relative merits of different composites do not yield basic material characteristics which can be used for design.The author has recently developed an instrumented Charpy type of impact test to obtain basic information such as load-deflection relationship, fracture toughness, crack velocity and load-strain history during an impact event. From this information, a damage based constitutive model was proposed. Relative improvements in performance due to the addition of fibers as observed in the instrumented tests are also compared with other conventional methods.

Experiment Investigation on Mechanical Property of Glass Fiber Reinforced Concrete

2014 ◽  
Vol 915-916 ◽  
pp. 784-787
Author(s):  
Yan Lv
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Glass Fiber ◽  
Volume Fraction ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Glass Fiber Reinforced

Based on the mechanical properties experiment of the glass fiber reinforced concrete with 0%0.6%0.8% and 1% glass fiber volume fraction, the mechanics property such as tensile strength, compressive strength, flexural strength and flexural elasticity modulus are analyzed and compared with the plain concrete when the kinds of fiber content changes. The research results show that the effect of tensile strength and flexural strength can be improved to some extent, which also can serve as a reference or basis for further improvement and development the theory and application of the glass fiber reinforced concrete.

Application Study on the Steel Fiber Reinforced Concrete

2012 ◽  
Vol 204-208 ◽  
pp. 3740-3743
Author(s):  
Wen Cui ◽  
Qin Luo
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Mix Design ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Application Study ◽  
Ordinary Concrete

Mix design of the steel fiber reinforced concrete was analyzed based on the engineering conditions. It was indicated by comparing with the strength values of steel fiber reinforced concrete (CF40) and ordinary concrete (C40) that the tensile strength of the steel fiber reinforced concrete increased about 70%, the compressive strength increased about 10%, the initial cracking strength increased about 150%.The reasonable construction technologies were used in mixing, transportation, pouring, vibrating and curing of the steel fiber reinforced concrete in order to ensure quality of the construction.

scholarly journals Experimental Study on Mechanical Properties of High Performance Hybrid Fiber Concrete for Shaft Lining

2021 ◽  
Vol 11 (17) ◽  
pp. 7926
Author(s):  
Qian Zhang ◽  
Wenqing Zhang ◽  
Yu Fang ◽  
Yongjie Xu ◽  
Xianwen Huang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Reinforced Concrete ◽  
Reference Group ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Fiber Concrete ◽  
Shaft Lining

In order to solve the problem of highly brittle shaft lining under dynamic loading, a combination of hybrid fiber concrete mixed with steel and polypropylene fiber is proposed to make shaft lining. C60, the concrete commonly used in shaft lining, was selected as the reference group. The static mechanical properties, dynamic mechanical properties, and crack failure characteristics of the hybrid fiber concrete were experimentally studied. The test results showed that compared to the reference group concrete, the compressive strength of the hybrid fiber-reinforced concrete did not significantly increase, but the splitting tensile strength increased by 60.4%. The split Hopkinson compression bar results showed that the optimal group peak stress and peak strain of the hybrid fiber concrete increased by 58.2% and 79.2%, respectively, and the dynamic toughness increased by 68.1%. The strain distribution before visible cracks was analyzed by the DIC technology. The results showed that the strain dispersion phenomenon of the fiber-reinforced concrete specimen was stronger than that of the reference group concrete. By comparing the crack failure forms of the specimens, it was found that compared to the reference group concrete, the fiber-reinforced concrete specimens showed the characteristics of continuous and slow ductile failure. The above results suggest that HFRC has significantly high dynamic splitting tensile strength and compressive deformation capacity, as well as a certain anti-disturbance effect. It is an excellent construction material for deep mines under complex working conditions.

scholarly journals SCOPE OF IMPROVING MECHANICAL CHARACTERISTICS OF CONCRETE USING NATURAL FIBER AS A REINFORCING MATERIAL

2020 ◽  
Vol 32 (2) ◽  
Author(s):  
Sristi Das Gupta ◽  
MD Shahnewaz Aftab ◽  
Hasan Mohammod Zakaria ◽  
Chaity Karmakar
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Reinforced Concrete ◽  
Fiber Reinforced Concrete ◽  
Synthetic Fiber ◽  
Jute Fiber ◽  
Fiber Reinforced ◽  
Plastic Shrinkage ◽  
Shrinkage Cracks ◽  
Reinforcing Material

Using natural (Jute) fiber in concrete as a reinforcing material can not only augment the concrete strength but also restrict the use of synthetic fiber which is environmentally detrimental. To achieve this goal, this study evaluated compressive strength, tensile strength and plastic shrinkage of concrete incorporating ‘Natural (Jute)’ fiber of different length (15 mm and 25 mm) with various mix proportions of 0.10%, 0.2%, 0.3% and 0.4% respectively by volume of concrete. Concrete is vulnerable to grow shrinkage cracks because of high evaporation rate in dry and windy conditions. Incorporating of fibers could abate development of this crack. The large length (25 mm) and higher content ( 0.3%) of reinforcing materials (jute fiber) result to the lowering of mechanical properties of JFRC compare to plain concrete. But in the incorporation of short (15 mm) and low fiber content ( 0.3%), enhances the mechanical properties of the same JFRC. Inclusion of 0.3% (15 mm length) fiber gave maximum enhancement of both concrete compressive and tensile strength by 12.4% and 58% respectively compared to the non-fiber reinforced concrete. A drastic suppression of crack occurrence and area of crack between non-fiber reinforced concrete and fiber reinforced concretes was attained. Experimental results of incorporating 0.1–0.4% fiber with 15 mm length in concrete revealed that plastic shrinkage cracks were decreased by 75–99% in contrast to non-fiber reinforced concrete. Therefore, it is concluded that the incorporation of jute fiber in making FRC composite would be one of the favorable methods to enhance the performance of concrete.

Sign in / Sign up

Export Citation Format

Share Document