Transient Numerical Model on the Design Optimization of the Adiabatic Section Length for the Pulsating Heat Pipe

2021 ◽  
Vol 11 (20) ◽  
pp. 9432
Author(s):  
Kangli Bao ◽  
Yuan Zhuang ◽  
Xu Gao ◽  
Yuanyuan Xu ◽  
Xilei Wu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Numerical Model ◽  
Thermal Resistance ◽  
Heat Input ◽  
Transient Flow ◽  
High Heat ◽  
Pulsating Heat Pipe ◽  
Mean Velocity ◽  
High Heat Input ◽  
Adiabatic Section

In the application of pulsating heat pipes (PHPs), the lengths of the adiabatic sections are usually determined by the distance between the heat source and the heat sink, and have important effects on the performance of PHPs. However, there was little research on the effect of the adiabatic section lengths on the performance of PHPs. In this work, a new transient numerical model was proposed to investigate the transient flow and the heat transfer for PHPs with various adiabatic section lengths of 60, 120, 180, and 240 mm. Based on the numerical results, the flow and the heat transfer characteristics of the PHPs were analyzed. It was found that the flow velocities in the PHP with different adiabatic lengths increased with the increase in the heat input, and the mean velocity was calculated to be in the range of 0.139–0.428 m/s, which was consistent with the previous experimental results. The start-up performance of the PHP was better with shorter adiabatic section length. Furthermore, the thermal resistances of the PHPs with different adiabatic section lengths were calculated to analyze the effects of the adiabatic section length on the performance of the PHP. The results showed that when the heat input was 20 W, the PHP with the adiabatic section of 60 mm showed the lowest thermal resistance, whereas the PHP with longer adiabatic section length presented lower thermal resistance at high heat input (≥25 W).

Experimental Investigation of Heat Transfer of Refrigerant Fluid Pulsating Heat Pipe

2017 ◽  
Vol 865 ◽  
pp. 137-142
Author(s):  
Somchai Maneewan ◽  
Chantana Punlek ◽  
Hoy Yen Chan ◽  
Atthakorn Thongtha
Keyword(s):  
Heat Transfer ◽  
Thermal Resistance ◽  
Heat Pipe ◽  
Temperature Difference ◽  
Heat Input ◽  
Filling Ratio ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Filling Volume ◽  
Volume Filling

Heat transfer performances of a pulsating heat pipe (PHP) having internal and external diameter with 4.5 mm and 6 mm with various contents of refrigerant are experimentally investigated. The working fluid as R404A refrigerant was filled in the volume ratios from 0% to 80% and the heat input was controlled in the range from 10 W to 80 W. Obtained results exhibited the ability of R404A refrigerant can enhance the thermal performance in steady state condition. The average temperature difference of the evaporating section and condensing section in the 80% filling volume ratio decreased from 9.5 °C to 2.5 °C when the heating power increase from 10 W to 80 W. The thermal resistance of evaporator and condenser decreased with an increase of the heat input as well. For other filling volume ratios, the trend of temperature difference and thermal resistance was similar to that of the 80% volume filling ratio. Considering the same heat input, the highest heat transfer performance was found at the 80% volume filling ratio. Refrigerant with a relatively low dynamic consistency can lead to relatively high velocity in the PHP that can reduce the temperature difference between the evaporating section and condensing section.

scholarly journals Experimental Study on the Starting-Up and Heat Transfer Characteristics of Pulsating Heat Pipe Under Local Low-Frequency Vibrations

2021 ◽  
Author(s):  
Jing Chen ◽  
Junbiao Dong ◽  
Ye Yao
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Thermal Resistance ◽  
Heat Pipe ◽  
Low Frequency ◽  
Heating Power ◽  
Pulsating Heat Pipe ◽  
Heat Transfer Characteristics ◽  
Condensation Section ◽  
Adiabatic Section

This study mainly experimentally investigates and explores the effects of local low-frequency vibrations on the starting-up and heat transfer characteristics of the pulsating heat pipe. A micro motors with the vibration frequency of 200 Hz were imposed on the external surface of evaporation, condensation and adiabatic section of the pulsating heat pipe, respectively, and the starting-up temperature and the average temperatures along the evaporation section as well as the thermal performances of the vibrating heat pipe were experimentally scrutinized under the local vibrations of different positions. The following important conclusions can be achieved by the experimental study: 1) The effect of vibrations at the evaporation section and at the adiabatic section on the starting-up time of pulsating heat pipe is more significant than that at the condensation section. 2) The vibrations at different positions can reduce the starting-up temperature of the pulsating heat pipe. The effect of the vibrations at the evaporation section is the best as the heating power is lower, and the effect of the vibration at the adiabatic section is the best as the heating power is higher. 3) The vibrations at the evaporation section and at the adiabatic section can reduce the thermal resistance of the pulsating heat pipe. However, the vibrations at the condensation section have little effect on the thermal resistance of the pulsating heat pipe. 4) The vibrations at the evaporation section and at the adiabatic section can effectively reduce the temperature of evaporation section of the pulsating heat pipe, but the vibrations at the condensation section have no effect on the temperature of evaporation section of the pulsating heat pipe.

scholarly journals Experimental Study on the Starting-Up and Heat Transfer Characteristics of a Pulsating Heat Pipe under Local Low-Frequency Vibrations

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6310
Author(s):  
Jing Chen ◽  
Junbiao Dong ◽  
Ye Yao
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Thermal Resistance ◽  
Heat Pipe ◽  
Low Frequency ◽  
Heat Power ◽  
Pulsating Heat Pipe ◽  
Heat Transfer Characteristics ◽  
Condensation Section ◽  
Adiabatic Section

Vibrations have attracted much attention as an effective method for enhancing heat transfer in pulsating heat pipes (PHPs). This study mainly investigates and explores the effects of local low-frequency vibrations on the starting-up and heat transfer characteristics of a PHP. The starting-up temperature and average temperatures along the evaporation section of the pulsating heat pipe were experimentally scrutinized, along with thermal performance, under local vibrations on evaporation, condensation and adiabatic sections, respectively. The following important conclusions can be derived by the experimental study: (1) The effect of vibrations at the evaporation section and at the adiabatic section during the starting-up time of the PHP were more significant than that at the condensation section; (2) vibrations at different positions could reduce the starting-up temperature of the PHP—the effect of the vibrations at the evaporation section was the best when heat power was lower, while the effect of vibrations on the adiabatic section was the best when heat power was higher; (3) vibrations at the evaporation and adiabatic sections could reduce the thermal resistance of the PHP, but vibrations at the condensation section had little effect on the thermal resistance of the PHP; (4) vibrations at the evaporation and adiabatic sections could effectively reduce the temperature at the evaporation section of the PHP, but the vibrations at the condensation section had no effect on the temperature at the evaporation section of the PHP. This paper shows that local low-frequency vibrations have positive effects on the heat transfer performances of PHPs.

Effects of oxygen content on microstructure and impact toughness of high heat input flux-cored wire weld metals

2018 ◽  
Vol 115 (4) ◽  
pp. 410
Author(s):  
Fengyu Song ◽  
Yanmei Li ◽  
Ping Wang ◽  
Fuxian Zhu
Keyword(s):  
Grain Size ◽  
Impact Toughness ◽  
Weld Metal ◽  
Oxygen Content ◽  
Heat Input ◽  
High Heat ◽  
Cored Wire ◽  
Weld Metals ◽  
High Heat Input ◽  
The Impact

Three weld metals with different oxygen contents were developed. The influence of oxygen contents on the microstructure and impact toughness of weld metal was investigated through high heat input welding tests. The results showed that a large number of fine inclusions were formed and distributed randomly in the weld metal with oxygen content of 500 ppm under the heat input condition of 341 kJ/cm. Substantial cross interlocked acicular ferritic grains were induced to generate in the vicinity of the inclusions, primarily leading to the high impact toughness at low temperature for the weld metal. With the increase of oxygen content, the number of fine inclusions distributed in the weld metal increased and the grain size of intragranular acicular ferrites decreased, which enhanced the impact toughness of the weld metal. Nevertheless, a further increase of oxygen content would contribute to a great diminution of the austenitic grain size. Following that the fraction of grain boundary and the start temperature of transformation increased, which facilitated the abundant formation of pro-eutectoid ferrites and resulted in a deteriorative impact toughness of the weld metal.

Low Heat Input Welding for Thin Steel Fabrication

2006 ◽  
Vol 22 (02) ◽  
pp. 105-109
Author(s):  
S.M. Kelly ◽  
R.P. Martukanitz ◽  
P. Michaleris ◽  
M. Bugarewicz ◽  
T. D. Huang ◽  
...  
Keyword(s):  
Laser Beam ◽  
Heat Input ◽  
Arc Welding ◽  
Process Development ◽  
High Heat ◽  
Hybrid Laser Arc Welding ◽  
Thin Steel ◽  
High Heat Input ◽  
Time Distortion ◽  
Buckling Distortion

As thinner members are used in marine construction, the use of conventional joining techniques results in significant angular and buckling distortion due to the inherent high heat input with these processes. Several low heat input alternatives, including laser beam, gas metal arc, and hybrid laser arc welding, are explored. The paper focuses on process development, real time distortion measurements, and implementation of these processes.

Sign in / Sign up

Export Citation Format

Share Document