scholarly journals Comparison Failure and Successful Methodologies for Diffusion Measurements Undertaken inside Two Different Testing Rooms

2021 ◽  
Vol 11 (22) ◽  
pp. 10523
Author(s):  
Lamberto Tronchin ◽  
Angelo Farina ◽  
Antonella Bevilacqua ◽  
Francesca Merli ◽  
Pietro Fiumana
Keyword(s):  
Medium Density Fiberboard ◽  
Quadratic Residue ◽  
Solid Wood ◽  
Diffraction Effect ◽  
Test Results ◽  
Scattering Effects ◽  
Performance Arts ◽  
Standards And Regulations ◽  
Different Characteristics

The scattering phenomenon is known to be of great importance for the acoustic quality of a performance arts space. The scattering of sound can be achieved in different ways: it can be obtained by the presence of architectural and/or decorating elements inside a room (e.g., columns, statues), by the geometry and roughness of a surface (e.g., Quadratic Residue Diffuser (QRD)) and by the diffraction effect occurring when a sound wave hits the edges of an obstacle. This article deals with the surface scattering effects and the diffusion phenomenon only related to MDF and plywood panels tested by disposing the wells both horizontally and vertically. The test results undertaken inside a semi-reverberant room and inside a large reverberant room have been compared to highlight the success and the failure of the measuring methodologies. In detail, according to the existing standards and regulations (i.e., ISO 17497—Part 2), diffusion measurements have been undertaken on a few selected types of panel: two QRD panels (made of Medium Density Fiberboard (MDF) and plywood) with and without a smooth painted solid wood placed behind the QRD. The panels have been tested inside two rooms of different characteristics: a semi-anechoic chamber (Room A) and a large reverberant room (Room B). The volume size influenced the results that have been analyzed for both chambers, showing an overlap of reflections on panels tested inside Room A and a clear diffusion response for the panels tested inside Room B. In terms of the diffusion coefficient in all the octave bands between 125 Hz and 8 kHz, results should not be considered valid for panels tested in Room A because they were negatively impacted by extraneous reflections, while they are reliable for panels tested in Room B.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

Sinonasal effects of external dacryocystorhinostomy

2021 ◽  
pp. 1-4
Author(s):  
H Eyigor ◽  
E A Cetinkaya ◽  
D T Coban ◽  
G Ozturk ◽  
Ö Erdem
Keyword(s):  
Mucociliary Clearance ◽  
Nasal Symptom ◽  
Ciliary Activity ◽  
Test Results ◽  
Saccharine Test ◽  
Significant Difference ◽  
Symptom Scores ◽  
Endoscopic Score ◽  
External Dacryocystorhinostomy

Abstract Objective External dacryocystorhinostomy is thought to cause mucociliary dysfunction by damaging the mucosa, in turn affecting ciliary activity and mucus quality. This study investigated the effect of external dacryocystorhinostomy on sinonasal function. Methods Patients scheduled for unilateral external dacryocystorhinostomy who underwent endoscopic nasal examination and paranasal sinus computed tomography were included in this study. A saccharine test was performed on the planned surgical side and the mucociliary clearance time was determined. The sinonasal quality of life was measured in all patients, pre-operatively and at six months post-operatively, using the Sino-Nasal Outcome Test-22. The Lund–Kennedy endoscopic score was also determined in all patients, both pre- and post-operatively. Results The study comprised 28 patients (22 females and 6 males). A statistically significant difference was found between the pre- and post-operative saccharine test results (p = 0.006), but not between the pre- and post-operative Sino-Nasal Outcome Test-22 scores (p > 0.05). Conclusion This study is one of only a few to investigate the effect of external dacryocystorhinostomy on sinonasal function. The results showed that external dacryocystorhinostomy impairs mucociliary clearance. The surgical procedure is well tolerated and does not significantly change nasal symptom scores.

An improved nonlinear model considering relative velocity for the friction behavior between untwisted glass-fiber tow and roller

2021 ◽  
pp. 004051752110308
Author(s):  
Yang Liu ◽  
Zhong Xiang ◽  
Xiangqin Zhou ◽  
Zhenyu Wu ◽  
Xudong Hu
Keyword(s):  
Friction Coefficient ◽  
Glass Fiber ◽  
Relative Velocity ◽  
Friction Model ◽  
Woven Fabric ◽  
Test Results ◽  
Application Process ◽  
Friction Behavior ◽  
Improved Model

Friction between the tow and tool surface normally happens during the tow production, fabric weaving, and application process and has an important influence on the quality of the woven fabric. Based on this fact, this paper studied the influence of tension and relative velocity on the three kinds of untwisted-glass-fiber tow-on-roller friction with a Capstan-based test setup. Furthermore, an improved nonlinear friction model taking both tension and velocity into account was proposed. According to statistical test results, firstly, the friction coefficient was found to be positively correlated with tension and relative velocity. Secondly, tension and velocity were complementary on the tow-on-roller friction behavior, with neither being superior to the other. Thirdly, an improved model was found to present well the nonlinear characteristics between friction coefficient and tension and velocity, and predicational results of the model were found to agree well with the observations from Capstan tests.

scholarly journals Do Guidelines for the Diagnosis and Monitoring of Diabetes Mellitus Fulfill the Criteria of Evidence-Based Guideline Development?

2008 ◽  
Vol 54 (11) ◽  
pp. 1872-1882 ◽  
Author(s):  
Eva Nagy ◽  
Joseph Watine ◽  
Peter S Bunting ◽  
Rita Onody ◽  
Wytze P Oosterhuis ◽  
...  
Keyword(s):  
Diabetes Mellitus ◽  
Methodological Quality ◽  
Guideline Development ◽  
Evidence Based ◽  
Test Results ◽  
Time Period ◽  
Therapeutic Guidelines ◽  
Therapeutic Recommendations ◽  
Evidence Based Guideline

Abstract Background: Although the methodological quality of therapeutic guidelines (GLs) has been criticized, little is known regarding the quality of GLs that make diagnostic recommendations. Therefore, we assessed the methodological quality of GLs providing diagnostic recommendations for managing diabetes mellitus (DM) and explored several reasons for differences in quality across these GLs. Methods: After systematic searches of published and electronic resources dated between 1999 and 2007, 26 DM GLs, published in English, were selected and scored for methodological quality using the AGREE Instrument. Subgroup analyses were performed based on the source, scope, length, origin, and date and type of publication of GLs. Using a checklist, we collected laboratory-specific items within GLs thought to be important for interpretation of test results. Results: The 26 diagnostic GLs had significant shortcomings in methodological quality according to the AGREE criteria. GLs from agencies that had clear procedures for GL development, were longer than 50 pages, or were published in electronic databases were of higher quality. Diagnostic GLs contained more preanalytical or analytical information than combined (i.e., diagnostic and therapeutic) recommendations, but the overall quality was not significantly different. The quality of GLs did not show much improvement over the time period investigated. Conclusions: The methodological shortcomings of diagnostic GLs in DM raise questions regarding the validity of recommendations in these documents that may affect their implementation in practice. Our results suggest the need for standardization of GL terminology and for higher-quality, systematically developed recommendations based on explicit guideline development and reporting standards in laboratory medicine.

Comparison of results obtained by static 3- and 4-point bending and flexural vibration tests on solid wood, MDF, and 5-plywood

Holzforschung ◽  
2013 ◽  
Vol 67 (8) ◽  
pp. 941-948 ◽  
Author(s):  
Hiroshi Yoshihara
Keyword(s):  
Young’S Modulus ◽  
Young's Modulus ◽  
Medium Density Fiberboard ◽  
Flexural Vibration ◽  
Solid Wood ◽  
Bending Tests ◽  
Four Point Bending ◽  
Flexural Vibration Test ◽  
The Difference ◽  
Vibration Tests

Abstract The flexural Young’s modulus of western hemlock, medium-density fiberboard, and 5-plywood (made of lauan) has been determined by conducting three- and four-point bending tests with various span lengths and by flexural vibration test. The Young’s modulus was significantly influenced by the deflection measurement method. In particular, the Young’s modulus was not reliable based on the difference between the deflections at two specific points in the specimen, although this test is standardized according to ISO 3349-1975 and JIS Z2101-2009.

Properties comparison of GaN epilayers deposited under different growth temperatures

2011 ◽  
Vol 19 (1) ◽  
Author(s):  
P. Wang ◽  
H. Yan ◽  
B. Cao ◽  
W. Wei ◽  
Z. Gan ◽  
...  
Keyword(s):  
Growth Temperature ◽  
Structural Characteristics ◽  
Chemical Vapour ◽  
Optimal Growth ◽  
Good Method ◽  
Test Results ◽  
Temperature Deposition ◽  
Metalorganic Chemical Vapour Deposition ◽  
Gan Film

AbstractUndoped GaN epilayers were grown on c-plane sapphire substrates under different growth temperatures by metalorganic chemical vapour deposition (MOCVD). The optical and structural characteristics of these grown samples were studied and compared. It was found that the crystalline quality of GaN film deposited at 1050°C was better that of other samples. Photoluminescence spectra showed that the intensities of yellow luminescence band of the samples decreased as the growth temperature increased. All above test results demonstrate that high temperature deposition can serve as a good method for high-quality GaN epilayer growth and there exists an optimal growth temperature.

The quality of the wood bonding depending on the method of applying the selected thermoplastic biopolymers

2021 ◽  
Vol 116 ◽  
pp. 78-85
Author(s):  
Aneta Gumowska ◽  
Grzegorz Kowaluk
Keyword(s):  
Shear Strength ◽  
Solid Wood ◽  
Average Value ◽  
Wood Bonding ◽  
Research Show

The quality of the wood bonding depending on the method of applying the selected thermoplastic biopolymers. The aim of the research was to determine the effect of the method of applying the biopolymer on the surface of bonding solid wood elements on the quality of the obtained adhesive connection. The results of conducted mechanical research show that the highest average value of shear strength was observed for birch lamellas bonded with PLA, both with the first and second method of application. In case of estimating the quality of the bonding of wooden elements, better results were achieved for PLA and the second method of application the "green" adhesive.

Constrained Shape Scaling of Trimmed NURBS Surfaces

1999 ◽  
Author(s):  
Pifu Zhang ◽  
Caiming Zhang ◽  
Fuhua (Frank) Cheng
Keyword(s):  
Data Exchange ◽  
Surface Deformation ◽  
Current Data ◽  
Free Form ◽  
Test Results ◽  
Nurbs Surface ◽  
Curvature Distribution ◽  
The Given ◽  
Boundary Curves

Abstract A method to scale and deform a trimmed NURBS surface while holding the shape and size of specific features (trimming curves) unchanged is presented. The new surface is formed by scaling the given surface according to the scaling requirement first; and then attaching the (original) features to the scaled NURBS surface at appropriate locations. The attaching process requires several geometric operations and constrained free-form surface deformation. The resulting surface has the same features as the original surface and same boundary curves as the scaled surface while reflecting the shape and curvature distribution of the scaled surface. This is achieved by minimizing a shape-preserving objective function which covers all the factors in the deformation process such as bending, stretching and spring effects. The resulting surface maintains a NURBS representation and, hence, is compatible with most of the current data-exchange standards. Test results on several car parts with trimming curves are included. The, quality of the resulting surfaces is examined using the highlight line model.

Sign in / Sign up

Export Citation Format

Share Document