scholarly journals Proposal and Performance Study of a Novel Mooring System with Six Mooring Lines for Spar-Type Offshore Wind Turbines

2021 ◽  
Vol 11 (24) ◽  
pp. 11665
Author(s):  
Shi Liu ◽  
Yi Yang ◽  
Chao Wang ◽  
Yuangang Tu
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Irregular Waves ◽  
Offshore Wind Turbine ◽  
Mooring System ◽  
Mooring Lines ◽  
Included Angle ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

Spar-type floating offshore wind turbines commonly vibrate excessively when under the coupling impact of wind and wave. The wind turbine vibration can be controlled by developing its mooring system. Thus, this study proposes a novel mooring system for the spar-type floating offshore wind turbine. The proposed mooring system has six mooring lines, which are divided into three groups, with two mooring lines in the same group being connected to the same fairlead. Subsequently, the effects of the included angle between the two mooring lines on the mooring-system’s performance are investigated. Then, these six mooring lines are connected to six independent fairleads for comparison. FAST is utilized to calculate wind turbine dynamic response. Wind turbine surge, pitch, and yaw movements are presented and analyzed in time and frequency domains to quantitatively evaluate the performances of the proposed mooring systems. Compared with the mooring system with six fairleads, the mooring system with three fairleads performed better. When the included angle was 40°, surge, pitch, and yaw movement amplitudes of the wind turbine reduced by 39.51%, 6.8%, and 12.34%, respectively, when under regular waves; they reduced by 56.08%, 25.00%, and 47.5%, respectively, when under irregular waves. Thus, the mooring system with three fairleads and 40° included angle is recommended.

Dynamic Responses of a Spar Type Floating Offshore Wind Turbine With Failed Moorings

2020 ◽  
Author(s):  
Yajun Ren ◽  
Vengatesan Venugopal
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Mooring System ◽  
Floating Offshore Wind Turbine ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Platform Motions

Abstract The complex dynamic characteristics of Floating Offshore Wind Turbines (FOWTs) have raised wider consideration, as they are likely to experience harsher environments and higher instabilities than the bottom fixed offshore wind turbines. Safer design of a mooring system is critical for floating offshore wind turbine structures for station keeping. Failure of mooring lines may lead to further destruction, such as significant changes to the platform’s location and possible collisions with a neighbouring platform and eventually complete loss of the turbine structure may occur. The present study focuses on the dynamic responses of the National Renewable Energy Laboratory (NREL)’s OC3-Hywind spar type floating platform with a NREL offshore 5-MW baseline wind turbine under failed mooring conditions using the fully coupled numerical simulation tool FAST. The platform motions in surge, heave and pitch under multiple scenarios are calculated in time-domain. The results describing the FOWT motions in the form of response amplitude operators (RAOs) and spectral densities are presented and discussed in detail. The results indicate that the loss of the mooring system firstly leads to longdistance drift and changes in platform motions. The natural frequencies and the energy contents of the platform motion, the RAOs of the floating structures are affected by the mooring failure to different degrees.

scholarly journals Impact of Typhoons on Floating Offshore Wind Turbines: A Case Study of Typhoon Mangkhut

2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Jiawen Li ◽  
Jingyu Bian ◽  
Yuxiang Ma ◽  
Yichen Jiang
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Safety Evaluation ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Motion Response ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Coupling Motion

A typhoon is a restrictive factor in the development of floating wind power in China. However, the influences of multistage typhoon wind and waves on offshore wind turbines have not yet been studied. Based on Typhoon Mangkhut, in this study, the characteristics of the motion response and structural loads of an offshore wind turbine are investigated during the travel process. For this purpose, a framework is established and verified for investigating the typhoon-induced effects of offshore wind turbines, including a multistage typhoon wave field and a coupled dynamic model of offshore wind turbines. On this basis, the motion response and structural loads of different stages are calculated and analyzed systematically. The results show that the maximum response does not exactly correspond to the maximum wave or wind stage. Considering only the maximum wave height or wind speed may underestimate the motion response during the traveling process of the typhoon, which has problems in guiding the anti-typhoon design of offshore wind turbines. In addition, the coupling motion between the floating foundation and turbine should be considered in the safety evaluation of the floating offshore wind turbine under typhoon conditions.

Coupled Dynamic Analysis for Multi-Unit Floating Offshore Wind Turbine in Maximum Operational and Survival Conditions

2015 ◽  
Author(s):  
H. K. Jang ◽  
H. C. Kim ◽  
M. H. Kim ◽  
K. H. Kim
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Time Domain ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Random Waves ◽  
Mooring Lines ◽  
Floating Offshore Wind Turbine ◽  
Coupled Dynamic Analysis ◽  
Floating Offshore Wind Turbines

Numerical tools for a single floating offshore wind turbine (FOWT) have been developed by a number of researchers, while the investigation of multi-unit floating offshore wind turbines (MUFOWT) has rarely been performed. Recently, a numerical simulator was developed by TAMU to analyze the coupled dynamics of MUFOWT including multi-rotor-floater-mooring coupled effects. In the present study, the behavior of MUFOWT in time domain is described through the comparison of two load cases in maximum operational and survival conditions. A semi-submersible floater with four 2MW wind turbines, moored by eight mooring lines is selected as an example. The combination of irregular random waves, steady currents and dynamic turbulent winds are applied as environmental loads. As a result, the global motion and kinetic responses of the system are assessed in time domain. Kane’s dynamic theory is employed to formulate the global coupled dynamic equation of the whole system. The coupling terms are carefully considered to address the interactions among multiple turbines. This newly developed tool will be helpful in the future to evaluate the performance of MUFOWT under diverse environmental scenarios. In the present study, the aerodynamic interactions among multiple turbines including wake/array effect are not considered due to the complexity and uncertainty.

scholarly journals The Effect of the Second-Order Wave Loads on Drift Motion of a Semi-Submersible Floating Offshore Wind Turbine

2020 ◽  
Vol 8 (11) ◽  
pp. 859
Author(s):  
Thanh-Dam Pham ◽  
Hyunkyoung Shin
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Second Order ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wave Loads ◽  
Hydrodynamic Loads ◽  
Drift Motion ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

Floating offshore wind turbines (FOWTs) have been installed in Europe and Japan with relatively modern technology. The installation of floating wind farms in deep water is recommended because the wind speed is stronger and more stable. The design of the FOWT must ensure it is able to withstand complex environmental conditions including wind, wave, current, and performance of the wind turbine. It needs simulation tools with fully integrated hydrodynamic-servo-elastic modeling capabilities for the floating offshore wind turbines. Most of the numerical simulation approaches consider only first-order hydrodynamic loads; however, the second-order hydrodynamic loads have an effect on a floating platform which is moored by a catenary mooring system. At the difference-frequencies of the incident wave components, the drift motion of a FOWT system is able to have large oscillation around its natural frequency. This paper presents the effects of second-order wave loads to the drift motion of a semi-submersible type. This work also aimed to validate the hydrodynamic model of Ulsan University (UOU) in-house codes through numerical simulations and model tests. The NREL FAST code was used for the fully coupled simulation, and in-house codes of UOU generates hydrodynamic coefficients as the input for the FAST code. The model test was performed in the water tank of UOU.

Design Requirements for Floating Offshore Wind Turbines

2013 ◽  
Author(s):  
Xiaohong Chen ◽  
Qing Yu
Keyword(s):  
Wind Turbine ◽  
Case Studies ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Design Parameters ◽  
Offshore Wind Turbine ◽  
Support Structure ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Design Requirements

This paper presents the research in support of the development of design requirements for floating offshore wind turbines (FOWTs). An overview of technical challenges in the design of FOWTs is discussed, followed by a summary of the case studies using representative FOWT concepts. Three design concepts, including a Spar-type, a TLP-type and a Semisubmersible-type floating support structure carrying a 5-MW offshore wind turbine, are selected for the case studies. Both operational and extreme storm conditions on the US Outer Continental Shelf (OCS) are considered. A state-of-the-art simulation technique is employed to perform fully coupled aero-hydro-servo-elastic analysis using the integrated FOWT model. This technique can take into account dynamic interactions among the turbine Rotor-Nacelle Assembly (RNA), turbine control system, floating support structure and stationkeeping system. The relative importance of various design parameters and their impact on the development of design criteria are evaluated through parametric analyses. The paper also introduces the design requirements put forward in the recently published ABS Guide for Building and Classing Floating Offshore Wind Turbine Installations (ABS, 2013).

Evaluation of a Hybrid Representation to Model the Wind Turbine, Platform and Mooring Lines in the Analysis of Floating Offshore Wind Turbines

2021 ◽  
Author(s):  
Eloi Daniel de Araujo Neto ◽  
William Rodriguez ◽  
Fabr\xedcio Nogueira Corr\xeaa ◽  
Beatriz De Souza Leite Pires De Lima ◽  
Breno Pinheiro Jacob ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Mooring Lines ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

scholarly journals A Reference Open-Source Controller for Fixed and Floating Offshore Wind Turbines

2021 ◽  
Author(s):  
Nikhar Abbas ◽  
Daniel Zalkind ◽  
Lucy Pao ◽  
Alan Wright
Keyword(s):  
Wind Turbine ◽  
Open Source ◽  
Wind Turbines ◽  
Torque Control ◽  
Offshore Wind ◽  
Speed Ratio ◽  
Offshore Wind Turbine ◽  
Offshore Wind Turbines ◽  
Industry Standards ◽  
Floating Offshore Wind Turbines

Abstract. This paper describes the development of a new reference controller framework for fixed and floating offshore wind turbines that greatly facilitates controller tuning and represents standard industry practices. The reference wind turbine controllers that are most commonly cited in the literature have been developed to work with specific reference wind turbines. Although these controllers have provided standard control functionalities, they are often not easy to modify for use on other turbines, so it has been challenging for researchers to run representative, fully dynamic simulations of other wind turbine designs. The Reference Open-Source Controller (ROSCO) has been developed to provide a modular reference wind turbine controller that represents industry standards and performs comparably to or better than existing reference controllers. The formulation of the ROSCO controller logic and tuning processes is presented in this paper. Control capabilities such as tip-speed ratio tracking generator torque control, minimum pitch saturation, wind speed estimation, and a smoothing algorithm at near-rated operation are included to provide a controller that is comparable to industry standards. A floating offshore wind turbine feedback module is also included to facilitate growing research in the floating offshore arena. All the standard controller implementations and control modules are automatically tuned such that a non-controls engineer or automated optimization routine can easily improve the controller performance. This article provides the framework and theoretical basis for the ROSCO controller modules and generic tuning processes. Simulations of the National Renewable Energy Laboratory (NREL) 5-MW reference wind turbine and International Energy Agency 15-MW reference turbine on the University of Maine semisubmersible platform are analyzed to demonstrate the controller's performance in both fixed and floating configurations, respectively. The simulation results demonstrate ROSCO's peak shaving routine to reduce maximum rotor thrusts by nearly 14 % compared to the NREL 5-MW reference wind turbine controller on the land-based turbine and to reduce maximum platform pitch angles by slightly more than 35 % when using the platform feedback routine instead of a more traditional low-bandwidth controller.

scholarly journals Fatigue Assessment of Moorings for Floating Offshore Wind Turbines by Advanced Spectral Analysis Methods

2021 ◽  
Vol 10 (1) ◽  
pp. 37
Author(s):  
Vincenzo Piscopo ◽  
Antonio Scamardella ◽  
Giovanni Battista Rossi ◽  
Francesco Crenna ◽  
Marta Berardengo
Keyword(s):  
Spectral Analysis ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Time Domain ◽  
Offshore Wind ◽  
Stress Process ◽  
Mooring Lines ◽  
Offshore Wind Turbines ◽  
Analysis Methods ◽  
Floating Offshore Wind Turbines

The fatigue assessment of mooring lines for floating offshore wind turbines represents a challenging issue not only for the reliable design of the stationkeeping system but also for the economic impact on the installation and maintenance costs over the entire lifetime of the offshore wind farm. After a brief review about the state-of-art, the nonlinear time-domain hydrodynamic model of floating offshore wind turbines moored by chain cables is discussed. Subsequently, the assessment of the fatigue damage in the mooring lines is outlined, focusing on the combined-spectrum approach. The relevant fatigue parameters, due to the low- and wave-frequency components of the stress process, are estimated by two different methods. The former is based on the time-domain analysis of the filtered stress process time history. The latter, instead, is based on the spectral analysis of the stress process by two advanced methods, namely the Welch and Thomson ones. Subsequently, a benchmark study is performed, assuming as reference floating offshore wind turbine the OC4-DeepCWind semisubmersible platform, equipped with the 5 MW NREL wind turbine. The cumulative fatigue damage is determined for eight load conditions, including both power production and parked wind turbine situations. A comparative analysis between time-domain and spectral analysis methods is also performed. Current results clearly show that the endorsement of advanced spectral analysis methods can be helpful to improve the reliability of the fatigue life assessment of mooring lines.

scholarly journals Investigation of Hydrodynamic Forces for Floating Offshore Wind Turbines on Spar Buoys and Tension Leg Platforms with the Mooring Systems in Waves

2019 ◽  
Vol 9 (3) ◽  
pp. 608 ◽  
Author(s):  
Yu-Hsien Lin ◽  
Shin-Hung Kao ◽  
Cheng-Hao Yang
Keyword(s):  
Wind Turbines ◽  
Time Domain ◽  
Simulation System ◽  
Offshore Wind ◽  
Modular System ◽  
Mooring System ◽  
Mooring Lines ◽  
Offshore Wind Turbines ◽  
Motion Responses ◽  
Floating Offshore Wind Turbines

This study aims to develop a modularized simulation system to estimate dynamic responses of floating Offshore Wind Turbines (OWTs) based on the concepts of spar buoy and Tension Leg Platform (TLP) corresponding with two typical mooring lines. The modular system consists of the hydrodynamic simulator based the Cummins time domain equation, the Boundary Element Method (BEM) solver based on the 3D source distribution method, and an open-source visualization software ParaView to analyze the interaction between floating OWTs and waves. In order to realize the effects of mooring loads on the floating OWTs, the stiffness and damping matrices are applied to the quasi-static mooring system. The Response Amplitude Operators (RAOs) are compared between our predicted results and other published data to verify the modularized simulation system and understand the influence of mooring load on the motion responses in regular or irregular waves. It is also demonstrated that the quasi-static mooring system is applicable to different types of mooring lines as well as determining real-time motion responses. Eventually, wave load components at the resonance frequencies of different motion modes for selected floating OWTs would be present in the time domain.

scholarly journals Experimental Validation of Aero-Hydro-Servo-Elastic Models of a Scaled Floating Offshore Wind Turbine

2019 ◽  
Vol 9 (6) ◽  
pp. 1244 ◽  
Author(s):  
Kasper Jessen ◽  
Kasper Laugesen ◽  
Signe M. Mortensen ◽  
Jesper K. Jensen ◽  
Mohsen N. Soltani
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Experimental Validation ◽  
Numerical Models ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Scaled Model ◽  
Floating Offshore Wind Turbine ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

Floating offshore wind turbines are complex dynamical systems. The use of numerical models is an essential tool for the prediction of the fatigue life, ultimate loads and controller design. The simultaneous wind and wave loading on a non-stationary foundation with a flexible tower makes the development of numerical models difficult, the validation of these numerical models is a challenging task as the floating offshore wind turbine system is expensive and the testing of these may cause loss of the system. The validation of these numerical models is often made on scaled models of the floating offshore wind turbines, which are tested in scaled environmental conditions. In this study, an experimental validation of two numerical models for a floating offshore wind turbines will be conducted. The scaled model is a 1:35 Froude scaled 5 MW offshore wind turbine mounted on a tension-leg platform. The two numerical models are aero-hydro-servo-elastic models. The numerical models are a theoretical model developed in a MATLAB/Simulink environment by the authors, while the other model is developed in the turbine simulation tool FAST. A comparison between the numerical models and the experimental dynamics shows good agreement. Though some effects such as the periodic loading from rotor show a complexity, which is difficult to capture.

Sign in / Sign up

Export Citation Format

Share Document