scholarly journals Air Cleaning Performance of Two Species of Potted Plants and Different Substrates

2021 ◽  
Vol 12 (1) ◽  
pp. 284
Author(s):  
Tatiana Armijos-Moya ◽  
Pieter de Visser ◽  
Marc Ottelé ◽  
Andy van den Dobbelsteen ◽  
Philomena M. Bluyssen
Keyword(s):  
Activated Carbon ◽  
Relative Humidity ◽  
Plant Species ◽  
Clay Soil ◽  
Potted Plants ◽  
Air Cleaning ◽  
Cleaning Performance ◽  
Test Conditions ◽  
Clean Air ◽  
Peace Lily

Potted plants have been reported to uptake VOCs and help “cleaning” the air. This paper presents the results of a laboratory study in which two species of plants (peace lily and Boston fern) and three kinds of substrates (expanded clay, soil, and activated carbon) were tested and monitored on their capacity to deplete formaldehyde and CO2 in a glass chamber. Formaldehyde and CO2 were selected as indicators to evaluate the biofiltration efficacy of 28 different test conditions; relative humidity (RH) and temperature (T) were monitored during the experiments. To evaluate the efficacy of every test, the clean air delivery rate (CADR) was calculated. Overall, soil had the best performance in removing formaldehyde (~0.07–0.16 m3/h), while plants, in particular, were more effective in reducing CO2 concentrations (peace lily 0.01m3/h) (Boston fern 0.02–0.03 m3/h). On average, plants (~0.03 m3/h) were as effective as dry expanded clay (0.02–0.04 m3/h) in depleting formaldehyde from the chamber. Regarding air-cleaning performance, Boston ferns presented the best performance among the plant species, and the best performing substrate was the soil.

scholarly journals Air Cleaning Performance of Two Species of Potted Plants and Different Substrates

2021 ◽  
Author(s):  
Tatiana Armijos Moya ◽  
Pieter de Visser ◽  
Marc Ottele ◽  
Andy van den Dobbelsteen ◽  
Philomena M. Bluyssen
Keyword(s):  
Activated Carbon ◽  
Relative Humidity ◽  
Plant Species ◽  
Clay Soil ◽  
Potted Plants ◽  
Air Cleaning ◽  
Cleaning Performance ◽  
Test Conditions ◽  
Clean Air ◽  
Peace Lily

Abstract Potted plants have been reported to uptake VOCs and help ‘cleaning’ the air. This paper presents the results of a laboratory study in which two species of plants (Peace Lily and Boston Fern) and three kinds of substrates (expanded clay, soil and activated carbon) were tested and monitored on their capacity to deplete formaldehyde and CO2 in a glass chamber. Formaldehyde and CO2 were selected as indicators to evaluate the bio-filtration efficacy of 28 different test conditions; relative humidity (RH) and temperature (T) were monitored during the experiments. To evaluate the efficacy of every test the Clean Air Delivery Rate (CADR) was calculated. Overall, soil had the best performance in removing formaldehyde (~ 0.07–0.16 m3/h), while plants, in particular, were more effective in reducing CO2 concentrations (Peace lily 0.01m3/h) (Boston fern 0.02-0.03m3/h). On average, plants (~ 0.03 m3/h) were as effective as dry expanded clay (0.02–0.04 m3/h) in depleting formaldehyde from the chamber. Regarding air cleaning performance, Boston ferns presented the best performance among the plant species, and the best performing substrate was the soil.

Removal of Formaldehyde and Volatile Organic Compounds from Particleboards by Air-Cleaning Materials

2010 ◽  
Vol 113-116 ◽  
pp. 1870-1873
Author(s):  
Xiao Dong Zhu ◽  
Jun Shen ◽  
Yu Liu
Keyword(s):  
Activated Carbon ◽  
Voc Emissions ◽  
Photo Catalyst ◽  
Air Cleaning ◽  
Test Conditions ◽  
Formaldehyde Removal ◽  
Volatile Organic ◽  
Removal Efficiencies ◽  
Short Time ◽  
The Impact

The removal efficiencies of 4 air-cleaning materials on formaldehyde and VOC emissions from particleboards were examined in this paper. The effect of activated carbon and photo catalyst on formaldehyde and VOC emissions removal was notable in short time. The effect of scavenger was obviously on formaldehyde removal for its synthetic mechanism. And the impact of bioenzyme on formaldehyde and VOC emissions from particleboards is dependent on the test conditions and it shows no impact on emissions in this experiment.

Air Cleaning Performance of a Novel Electrostatic Air Purifier Using an Activated Carbon Fiber Filter for Passenger Cars

2017 ◽  
Vol 53 (6) ◽  
pp. 5867-5874 ◽  
Author(s):  
Hak-Joon Kim ◽  
Bangwoo Han ◽  
Chang Gyu Woo ◽  
Yong-Jin Kim ◽  
Gi-Taek Lim ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Carbon Fiber ◽  
Activated Carbon Fiber ◽  
Passenger Cars ◽  
Air Cleaning ◽  
Cleaning Performance ◽  
Air Purifier ◽  
Fiber Filter

scholarly journals Validation of chemotherapy drug vapor containment of an air cleaning closed-system drug transfer device

2021 ◽  
pp. 107815522110306
Author(s):  
Galit Levin ◽  
Paul JM Sessink
Keyword(s):  
Activated Carbon ◽  
Closed System ◽  
Membrane Filter ◽  
Drug Transfer ◽  
Glass Vessel ◽  
Air Cleaning ◽  
No Release ◽  
Activated Carbon Filter ◽  
Carbon Filter ◽  
Transfer Device

Purpose The purpose of this study was to test the efficacy of ChemfortTM, an air filtration closed-system drug transfer device to prevent release of chemotherapy drug vapors and aerosols under extreme conditions. The air cleaning system is based on the adsorption of drug vapors by an activated carbon filter in the Vial Adaptor before the air is released out of the drug vial. The functionality of the carbon filter was also tested at the end of device’s shelf life, and after a contact period with drug vapors for 7 days. Cyclophosphamide and 5-fluorouracil were the chemotherapy drugs tested. Methods The Vial Adaptor was attached to a drug vial and both were placed in a glass vessel. A needle was punctured through the vessel stopper and the Vial Adaptor septum to allow nitrogen gas to flow into the vial and to exit the vial via the air filter into the glass vessel which was connected to a cold trap. Potential contaminated surfaces in the trap system were wiped or rinsed to collect the escaped drug. Samples were analyzed using liquid chromatography tandem mass spectrometry. Results Cyclophosphamide and 5-fluorouracil were detected on most surfaces inside the trap system for all Vial Adaptors without an activated carbon filter. Contamination did not differ between the Vial Adaptors with and without membrane filter indicating no effect of the membrane filter. The results show no release of either drug for the Vial Adaptors with an activated carbon filter even after 3 years of simulated aging and 7 days of exposure to drug vapors. Conclusions Validation of air cleaning CSTDs is important to secure vapor and aerosol containment of chemotherapy and other hazardous drugs. The presented test method has proven to be appropriate for the validation of ChemfortTM Vial Adaptors. No release of cyclophosphamide and 5- fluorouracil was found even for Vial Adaptors after 3 years of simulated aging and 7 days of exposure to drug vapors.

scholarly journals Pt-Promoted Tungsten Carbide Nanostructures on Mesoporous Pinewood-Derived Activated Carbon for Catalytic Oxidation of Formaldehyde at Low Temperatures

2020 ◽  
Vol 1 (2) ◽  
pp. 86-105
Author(s):  
Qiangu Yan ◽  
Zhiyong Cai
Keyword(s):  
Electron Microscopy ◽  
Activated Carbon ◽  
Relative Humidity ◽  
Tungsten Carbide ◽  
Catalytic Oxidation ◽  
Space Velocity ◽  
Catalytic Performance ◽  
Inert Atmosphere ◽  
Bet Surface Area ◽  
Formaldehyde Concentration

Tungsten carbide (WC) nanostructures were prepared by carbothermal reduction (CR) of tungsten-impregnated pinewood-derived activated carbon (AC) at 1000 °C under an inert atmosphere. Brunauer-Emmet-Teller (BET) surface area, pore structures of the AC, and catalyst samples were evaluated by N2 adsorption-desorption experiments. The structures of the catalysts were characterized using X-ray powder diffraction (XRD). The morphologies and particle structures of the synthesized WC nanoparticles were investigated by field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). The WC/AC material was used as support of the platinum catalysts for catalytic oxidation of formaldehyde (HCHO) from interior sources. Pt-WC/AC catalysts with different platinum loadings were assessed for the catalytic oxidation of HCHO at low temperature. The catalytic performance was found to be significantly influenced by reaction temperature, initial formaldehyde concentration, relative humidity, and space velocity. The testing results demonstrated that HCHO can be totally oxidized by the 1 wt% Pt-WC/AC catalyst in the gas hourly space velocity (GHSV) = 50,000 h−1 at 30 °C with a relative humidity (RH) of 40%.

scholarly journals Inactivation of Vegetative Cells, but Not Spores, of Bacillus anthracis, B. cereus, and B. subtilis on Stainless Steel Surfaces Coated with an Antimicrobial Silver- and Zinc-Containing Zeolite Formulation

2003 ◽  
Vol 69 (7) ◽  
pp. 4329-4331 ◽  
Author(s):  
Belinda Galeano ◽  
Emily Korff ◽  
Wayne L. Nicholson
Keyword(s):  
Antimicrobial Activity ◽  
Stainless Steel ◽  
Relative Humidity ◽  
Bacillus Anthracis ◽  
Vegetative Cells ◽  
Test Conditions ◽  
Steel Surfaces ◽  
Zeolite Coating

ABSTRACT Stainless steel surfaces coated with paints containing a silver- and zinc-containing zeolite (AgION antimicrobial) were assayed in comparison to uncoated stainless steel for antimicrobial activity against vegetative cells and spores of three Bacillus species, namely, B. anthracis Sterne, B. cereus T, and B. subtilis 168. Under the test conditions (25°C and 80% relative humidity), the zeolite coating produced approximately 3 log10 inactivation of vegetative cells within a 5- to 24-h period, but viability of spores of the three species was not significantly affected.

scholarly journals Development of MILIONCAST, an Improved Model for Predicting Downy Mildew Sporulation on Onions

Plant Disease ◽  
2004 ◽  
Vol 88 (7) ◽  
pp. 695-702 ◽  
Author(s):  
Tijs Gilles ◽  
Kath Phelps ◽  
John P. Clarkson ◽  
Roy Kennedy
Keyword(s):  
Relative Humidity ◽  
Environmental Conditions ◽  
Temporal Pattern ◽  
Random Model ◽  
Controlled Environment ◽  
High Humidity ◽  
Potted Plants ◽  
Effects Of Temperature ◽  
Improved Model ◽  
Accuracy Of Prediction

The effects of temperature and relative humidity on Peronospora destructor sporulation on onion (Allium cepa) leaves were studied under controlled environmental conditions. Sporangia were produced most rapidly at 8 to 12°C after 5 h of high humidity during dark periods. The greatest number of sporangia was produced at 100% relative humidity (RH), and sporulation decreased to almost nil when humidity decreased to 93% RH. A model, named MILIONCAST (an acronym for MILdew on onION foreCAST), was developed based on the data from these controlled environment studies to predict the rate of sporulation in relation to temperature and relative humidity. The accuracy of prediction of sporulation was evaluated by comparing predictions with observations of sporulation on infected plants in pots outdoors. The accuracy of MILIONCAST was compared with the accuracy of existing models based on DOWNCAST. MILIONCAST gave more correct predictions of sporulation than the DOWNCAST models and a random model. All models based on DOWNCAST were more accurate than the random model when compared on the basis of all predictions (including positive and negative predictions), but they gave fewer correct predictions of sporulation than the random model. De Visser's DOWNCAST and ONIMIL improved their accuracy of prediction of sporulation events when the threshold humidity for sporulation was reduced to 92% RH. The temporal pattern of predicted sporulation by MILIONCAST generally corresponded well to the pattern of sporulation observed on the outdoor potted plants at Wellesbourne, UK.

Anthracnose of Florida Beggarweed (Desmodium tortuosum) Caused byColletotrichum truncatum

Weed Science ◽  
1988 ◽  
Vol 36 (3) ◽  
pp. 329-334 ◽  
Author(s):  
John Gardina ◽  
Robert H. Littrell ◽  
Richard T. Hanlin
Keyword(s):  
Relative Humidity ◽  
Host Specificity ◽  
Plant Species ◽  
Fungal Pathogen ◽  
Disease Development ◽  
Colletotrichum Truncatum ◽  
Optimum Conditions ◽  
Cotyledon Stage ◽  
Chamber Studies ◽  
Growth Chamber Studies

Greenhouse and growth chamber studies were conducted to determine conditions for infection of the fungal pathogenColletotrichum truncatum(Schw.) Andrus and Moore on Florida beggarweed (Desmodium tortuosum(Sw.) DC. # DEDTO and to determine the host specificity of this fungus. Optimum conditions for disease development were 14 to 16 h incubation in 100% relative humidity (RH) at 24 to 29 C. Control of Florida beggarweed with 105to 107C. truncatumspores/ml was greatest in the cotyledon stage and decreased with plant age. Ten of 18Desmodiumspecies tested were susceptible to the Florida beggarweed isolate ofC. truncatumbut 13 other plant species and varieties were resistant and 61 were immune.

Sign in / Sign up

Export Citation Format

Share Document