scholarly journals CBCT in Pediatric Dentistry: Awareness and Knowledge of Its Correct Use in Saudi Arabia

2021 ◽  
Vol 12 (1) ◽  
pp. 335
Author(s):  
Smita Singh Bhardwaj ◽  
Sara Alghamdi ◽  
Basim Almulhim ◽  
Abdullah Alassaf ◽  
Abdullah Almalki ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Saudi Arabia ◽  
Cone Beam Computed Tomography ◽  
Pediatric Patients ◽  
Pediatric Dentistry ◽  
Cone Beam ◽  
Cross Sectional ◽  
Dental Practitioners ◽  
Descriptive Survey

CBCT (Cone-beam computed tomography) is used for diagnosis, planning of treatment, and research. However, there are doubts and opinions regarding the use of CBCT for children and in pediatric dentistry. The knowledge about using this technique for pediatric patients is not clear to the dentists and some dental situations are still debated, therefore this study was done to understand the awareness and knowledge among dental practitioners and students across Saudi Arabia. A cross-sectional and descriptive survey was done on 464 dental practitioners and students, and 21 questions were put forward to assess the knowledge and awareness. All questions were then critically analyzed individually and descriptively concluded with appropriate references. Our study revealed that still very few dental practitioners are aware about the latest advances and use of this technique in pediatric dentistry, and more awareness needs to be created.

The Variation of Pulp Canal Configuration in Mandibular Posterior Teeth Using Cone Beam Computed Tomography in Indonesia Subpopulation Mongoloid Race

2020 ◽  
Vol 23 (1) ◽  
pp. 18-22
Author(s):  
Trelia Boel ◽  
Dewi Kartika ◽  
Dennis
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Cross Sectional ◽  
Posterior Teeth ◽  
Mandibular Molar ◽  
Molar Teeth ◽  
Research Criteria ◽  
Descriptive Survey

It is important to understand pulp canal configuration to have a successful endodontic treatment. Cone Beam Computed Tomography (CBCT) radiography is able to assess the pulp canal configuration, especially on the lingual/palatal, compared to the periapical radiography. The objective of the research is to know the prevalence pulp canal configuration of mandibular molar teeth in Indonesia subpopulation Mongoloid race using CBCT radiography. This research is a descriptive survey with a cross-sectional approach, using 38 CBCT radiographs from the patients undergoing dental treatments in hospitals in Medan. The subjects were selected based on research criteria; then their CBCT radiographs were interpreted and analyzed. The result shows the existence of mandibular mesial root type 2-1 (28.94%), 1-2-1 (5.26%), 2-2 (55.26%), 2-1-2-1 (2.64%), 3-2 (5.26%), 3-1 (2.64%), distal root type 1-1 (36.84%), 2-1 (23.68%), 1-2-1 (15.79%), 1-2 (2.63%), 2-2 (13.17%), 2-1-2-1 (5.26%), 1-3-1 (2.63%). The distolingual root of mandibular first molars consisted of type 1-1 (100%).  Mesial root of mandibular second molars of type 1-1 (2.63%), 2-1 (50%), 1-2-1 (5.26%), 2-2 (36.85%), 2-1-2-1 (2.63%), 1-2-1-2 (2.63%), distal root type 1-1 (57.89%), 2-1 (15.79%), 1-2-1 (13.16%), 2-2 (10.53%), 2-1-2 (2.63%). This variation of the pulp canal can be influenced by the shape of roots. A flat root usually contains pulp canal configuration type II – VIII Vertucci, similarly to mandibular molar mesial canals. As a summary, there is a variation of pulp canal configuration in mandibular first and second molars on Indonesian Mongoloid race, as seen from the CBCT radiographs.

scholarly journals Taurodontism in maxillary and mandibular molars using cone beam computed tomography in a dental center in Saudi Arabia

2021 ◽  
Vol 41 (4) ◽  
pp. 232-237
Author(s):  
Ahmad Hassan Jabali ◽  
Hemant Ramesh Chourasia ◽  
Abdullah Saeed Wasli ◽  
Ali Mohammed Alkhayrat ◽  
Hassan Mohammed Mahnashi ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Saudi Arabia ◽  
Cone Beam Computed Tomography ◽  
Oral Surgery ◽  
Conflicts Of Interest ◽  
Cone Beam ◽  
Radiographic Evaluation ◽  
Cross Sectional ◽  
Mandibular Molars ◽  
Study Participants

BACKGROUND: Taurodontism is a dental anomaly characterized by altered crown root ratio that is often diagnosed by radiographic evaluation. A three-dimensional cone beam computed tomography (CBCT) can aid in the diagnosis and treatment of taurodontic teeth. Only one study has reported the prevalence of taurodontism in a Saudi population. OBJECTIVE: Determine prevalence and other characteristics of taurodontism in permanent maxillary and mandibular molars, by CBCT in a dental center in Saudi Arabia. DESIGN: Cross-sectional. SETTING: College of dentistry. SUBJECTS AND METHODS: The first and second molars, maxillary and mandibular, from study participants of Saudi origin from Jazan region of Saudi Arabia were evaluated for taurodontism based on the criteria of Shifman and Chanannel. The degree of taurodontism was determined by the taurodontism index. Results were tabulated for analysis and the chi-square test was applied for the differences between age groups, genders, and maxillary and mandibular teeth. MAIN OUTCOME MEASURES: Characteristics of taurodontism. SAMPLE SIZE: 1839 teeth in 300 individuals. RESULTS: Taurodontism was seen in 24 (8%) of the study participants and in 71 teeth (3.9%). Taurodontism was significantly more prevalent in individuals between 21 and 40 years of age. Hypotaurodontism (67.6%, n=48) was most prevalent, followed by mesotaurodontism (23.9%, n=17) and hypertaurodontism (8.5%, n=6). The maxillary molars were more commonly involved than mandibular, but the results were not statistically significant. No significant differences in gender were observed. CONCLUSIONS: Dental clinicians should be familiar with the condition due to the clinical implications in oral surgery, endodontics and prosthodontics. The possibilities of a complex root canal system, an additional canal, difficulties in canal negotiation, instrumentation and subsequent obturation can be challenging for the clinician. LIMITATIONS: Conducted in a single dental center hence future studies with larger sample sizes in different regions of Saudi Arabia should be conducted to more accurately measure the prevalence. CONFLICTS OF INTEREST: None.

scholarly journals Accuracy and Reproducibility of Facial Measurements of Digital Photographs and Wrapped Cone Beam Computed Tomography (CBCT) Photographs

Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 757
Author(s):  
Maged Sultan Alhammadi ◽  
Abeer Abdulkareem Al-mashraqi ◽  
Rayid Hussain Alnami ◽  
Nawaf Mohammad Ashqar ◽  
Omar Hassan Alamir ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Soft Tissue ◽  
Cone Beam Computed Tomography ◽  
High Reliability ◽  
Three Dimensional ◽  
Cone Beam ◽  
Cross Sectional ◽  
Facial Profile ◽  
Digital Photographs ◽  
Gonial Angle

The study sought to assess whether the soft tissue facial profile measurements of direct Cone Beam Computed Tomography (CBCT) and wrapped CBCT images of non-standardized facial photographs are accurate compared to the standardized digital photographs. In this cross-sectional study, 60 patients with an age range of 18–30 years, who were indicated for CBCT, were enrolled. Two facial photographs were taken per patient: standardized and random (non-standardized). The non-standardized ones were wrapped with the CBCT images. The most used soft tissue facial profile landmarks/parameters (linear and angular) were measured on direct soft tissue three-dimensional (3D) images and on the photographs wrapped over the 3D-CBCT images, and then compared to the standardized photographs. The reliability analysis was performed using concordance correlation coefficients (CCC) and depicted graphically using Bland–Altman plots. Most of the linear and angular measurements showed high reliability (0.91 to 0.998). Nevertheless, four soft tissue measurements were unreliable; namely, posterior gonial angle (0.085 and 0.11 for wrapped and direct CBCT soft tissue, respectively), mandibular plane angle (0.006 and 0.0016 for wrapped and direct CBCT soft tissue, respectively), posterior facial height (0.63 and 0.62 for wrapped and direct CBCT soft tissue, respectively) and total soft tissue facial convexity (0.52 for both wrapped and direct CBCT soft tissue, respectively). The soft tissue facial profile measurements from either the direct 3D-CBCT images or the wrapped CBCT images of non-standardized frontal photographs were accurate, and can be used to analyze most of the soft tissue facial profile measurements.

scholarly journals Intraoperative cone beam computed tomography for detecting residual stones in percutaneous nephrolithotomy: a feasibility study

Urolithiasis ◽  
2021 ◽  
Author(s):  
R. A. Kingma ◽  
M. J. H. Voskamp ◽  
B. H. J. Doornweerd ◽  
I. J. de Jong ◽  
S. Roemeling
Keyword(s):  
Computed Tomography ◽  
Percutaneous Nephrolithotomy ◽  
Cone Beam Computed Tomography ◽  
University Hospital ◽  
Cone Beam ◽  
Cross Sectional ◽  
The Mean ◽  
Residual Stones ◽  
Residual Fragments

AbstractCone beam computed tomography (CBCT) provides multiplanar cross-sectional imaging and three-dimensional reconstructions and can be used intraoperatively in a hybrid operating room. In this study, we investigated the feasibility of using a CBCT-scanner for detecting residual stones during percutaneous nephrolithotomy (PCNL). Intraoperative CBCT-scans were made during PCNL procedures from November 2018 until March 2019 in a university hospital. At the point where the urologist would have otherwise ended the procedure, a CBCT-scan was made to image any residual fragments that could not be detected by either nephroscopy or conventional C-arm fluoroscopy. Residual fragments that were visualized on the CBCT-scan were attempted to be extracted additionally. To evaluate the effect of this additional extraction, each CBCT-scan was compared with a regular follow-up CT-scan that was made 4 weeks postoperatively. A total of 19 procedures were analyzed in this study. The mean duration of performing the CBCT-scan, including preparation and interpretation, was 8 min. Additional stone extraction, if applicable, had a mean duration of 11 min. The mean effective dose per CBCT-scan was 7.25 mSv. Additional extraction of residual fragments as imaged on the CBCT-scan occurred in nine procedures (47%). Of the follow-up CT-scans, 63% showed a stone-free status as compared to 47% of the intraoperative CBCT-scans. We conclude that the use of CBCT for the detection of residual stones in PCNL is meaningful, safe, and feasible.

scholarly journals Comparison between C-arm cone beam computed tomography and interventional angiography in transarterial chemoembolization of hepatocellular carcinoma

2019 ◽  
Vol 50 (1) ◽  
Author(s):  
Ibraheim Ahmed Diab ◽  
Shaimaa Abdel-hamid Hassanein ◽  
Hala Hafez Mohamed
Keyword(s):  
Computed Tomography ◽  
Hepatocellular Carcinoma ◽  
Cone Beam Computed Tomography ◽  
Vascular Anatomy ◽  
Cone Beam ◽  
Focal Lesion ◽  
Focal Lesions ◽  
Conventional Angiography ◽  
Interventional Angiography ◽  
Cross Sectional

Abstract Background Hepatocellular carcinoma (HCC) is the most common primary hepatic malignancy of adults. One of the established treatment procedures performed worldwide for HCC is transcatheter arterial chemoembolization (TACE). By using conventional angiography in TACE, we can detect and identify the vascular anatomy of the liver through obtaining 2D images. Recently C-arm cone beam computed tomography (CBCT) is introduced for obtaining cross-sectional and three-dimensional (3D) images for better visualization of small tumors and their feeding arteries. Results The number of detected focal lesions by angiography was 51 compared to 87 focal lesion detected by CBCT; of those, 45 and 77 were active lesions by both procedures respectively. For lesions, less than 1 cm CBCT detected 23 lesions while angiography detected only one lesion. Angiography detected 87 feeding arterial branch while cone beam CT-HA detected 130 branches to the same number of target lesion. Feeder tractability and confidence were better by CBCT. Conclusion CBCT is superior to angiography in tumor detectability, detection of lesions less than 1 cm, feeder detection, and feeder traction; however, conventional angiography and DSA are irreplaceable. Thus, combination of CBCT with angiography during TACE produces better results and less complication.

scholarly journals Alveolar bone heights of maxillary central incisors in unilateral cleft lip and palate patients using cone-beam computed tomography evaluation

2021 ◽  
Author(s):  
Marcin Stasiak ◽  
Anna Wojtaszek-Słomińska ◽  
Bogna Racka-Pilszak
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Alveolar Bone ◽  
Contralateral Side ◽  
Cone Beam ◽  
Rank Test ◽  
Cross Sectional ◽  
Alveolar Bone Grafting

Abstract Purpose The aims of this retrospective cross-sectional study were to measure and compare labial and palatal alveolar bone heights of maxillary central incisors in unilateral cleft lip and palate patients, following STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) guidelines. Patients and methods The study group consisted of 21 patients with a mean age of 16 years. High-resolution cone-beam computed tomography was performed at least one year after secondary alveolar bone grafting. The experimental side was the cleft side and the contralateral side without congenital cleft was the control. Measurements were performed on incisors’ midsagittal cross-sections. The Wilcoxon signed-rank test was used for intergroup comparisons. Results The labial and palatal distances between alveolar bone crests and cementoenamel junctions were significantly greater on the cleft side than on the noncleft side. Mean differences were 0.75 and 1.41 mm, respectively. The prevalence of dehiscences at the cleft side maxillary central incisors was 52% on the labial surface and 43% on the palatal surface. In the controls, it was 19% and 14%, respectively. Conclusion The cleft-adjacent maxillary central incisors had more apically displaced alveolar bone crests on the labial and palatal sides of the roots than the controls. Higher prevalence of dehiscences was found on the cleft side. Bone margin differences predispose to gingival height differences of the central incisors. These differences could increase the demands of patients to obtain more esthetic treatment results with orthodontic extrusion and periodontal intervention on the cleft side.

Sign in / Sign up

Export Citation Format

Share Document