scholarly journals A Turbulence-Oriented Approach to Retrieve Various Atmospheric Parameters Using Advanced Lidar Data Processing Techniques

Atmosphere ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 38 ◽  
Author(s):  
Iulian-Alin Rosu ◽  
Marius-Mihai Cazacu ◽  
Otilia Prelipceanu ◽  
Maricel Agop
Keyword(s):  
Well Being ◽  
Refraction Index ◽  
Atmospheric Temperature ◽  
Lidar Data ◽  
Average Wind Speed ◽  
Wind Speed Profile ◽  
Boundary Layer Height ◽  
Average Wind ◽  
Atmospheric Temperature Profile ◽  
Processing Techniques

The article is aimed at presenting a semi-empirical model coded and computed in the programming language Python, which utilizes data gathered with a standard biaxial elastic lidar platform in order to calculate the altitude profiles of the structure coefficients of the atmospheric refraction index C N 2 ( z ) and other associated turbulence parameters. Additionally, the model can be used to calculate the PBL (Planetary Boundary Layer) height, and other parameters typically employed in the field of astronomy. Solving the Fernard–Klett inversion by correlating sun-photometer data obtained through our AERONET site with lidar data, it can yield the atmospheric extinction and backscatter profiles α ( z ) and β ( z ) , and thus obtain the atmospheric optical depth. Finally, several theoretical notions of interest that utilize the solved parameters are presented, such as approximated relations between C N 2 ( z ) and the atmospheric temperature profile T ( z ) , and between the scintillation of backscattered lidar signal and the average wind speed profile U ( z ) . These obtained profiles and parameters also have several environmental applications that are connected directly and indirectly to human health and well-being, ranging from understanding the transport of aerosols in the atmosphere and minimizing the errors in measuring it, to predicting extreme, and potentially-damaging, meteorological events.

SHAPING OF AN AUTONOMOUS POWER SYSTEM FOR GUARANTEED POWER SUPPLY WITH THE PREDOMINANCE WIND ENERGY

2018 ◽  
pp. 28-50
Author(s):  
S. G. Ignatiev ◽  
S. V. Kiseleva
Keyword(s):  
Energy Storage ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Demand ◽  
Diesel Generator ◽  
Average Wind Speed ◽  
Wind Speeds ◽  
Average Wind

Optimization of the autonomous wind-diesel plants composition and of their power for guaranteed energy supply, despite the long history of research, the diversity of approaches and methods, is an urgent problem. In this paper, a detailed analysis of the wind energy characteristics is proposed to shape an autonomous power system for a guaranteed power supply with predominance wind energy. The analysis was carried out on the basis of wind speed measurements in the south of the European part of Russia during 8 months at different heights with a discreteness of 10 minutes. As a result, we have obtained a sequence of average daily wind speeds and the sequences constructed by arbitrary variations in the distribution of average daily wind speeds in this interval. These sequences have been used to calculate energy balances in systems (wind turbines + diesel generator + consumer with constant and limited daily energy demand) and (wind turbines + diesel generator + consumer with constant and limited daily energy demand + energy storage). In order to maximize the use of wind energy, the wind turbine integrally for the period in question is assumed to produce the required amount of energy. For the generality of consideration, we have introduced the relative values of the required energy, relative energy produced by the wind turbine and the diesel generator and relative storage capacity by normalizing them to the swept area of the wind wheel. The paper shows the effect of the average wind speed over the period on the energy characteristics of the system (wind turbine + diesel generator + consumer). It was found that the wind turbine energy produced, wind turbine energy used by the consumer, fuel consumption, and fuel economy depend (close to cubic dependence) upon the specified average wind speed. It was found that, for the same system with a limited amount of required energy and high average wind speed over the period, the wind turbines with lower generator power and smaller wind wheel radius use wind energy more efficiently than the wind turbines with higher generator power and larger wind wheel radius at less average wind speed. For the system (wind turbine + diesel generator + energy storage + consumer) with increasing average speed for a given amount of energy required, which in general is covered by the energy production of wind turbines for the period, the maximum size capacity of the storage device decreases. With decreasing the energy storage capacity, the influence of the random nature of the change in wind speed decreases, and at some values of the relative capacity, it can be neglected.

scholarly journals Analysis of Performance of the Wind-Driven Pulverizing Aerator Based on Average Wind Speeds in the Conditions of Góreckie Lake

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2796
Author(s):  
Andrzej Osuch ◽  
Ewa Osuch ◽  
Stanisław Podsiadłowski ◽  
Piotr Rybacki
Keyword(s):  
Mathematical Model ◽  
Wind Speed ◽  
Water Pump ◽  
Average Wind Speed ◽  
Flow Rates ◽  
Wind Speeds ◽  
Average Wind ◽  
Flow Through ◽  
Analysis Of Performance ◽  
Research Period

In the introduction to this paper, the characteristics of Góreckie lake and the construction and operation of the wind-driven pulverizing aerator are presented. The purpose of this manuscript is to determine the efficiency of the pulverizing aerator unit in the windy conditions of Góreckie Lake. The efficiency of the pulverization aerator depends on the wind conditions at the lake. It was necessary to conduct thorough research to determine the efficiency of water flow through the pulverization segment (water pump). It was necessary to determine the rotational speed of the paddle wheel, which depended on the average wind speed. Throughout the research period, measurements of hourly average wind speed were carried out. It was possible to determine the efficiency of the machine by developing a dedicated mathematical model. The latest method was used in the research, consisting of determining the theoretical volumetric flow rates of water in the pulverizing aerator unit, based on average hourly wind speeds. Pulverization efficiency under the conditions of Góreckie Lake was determined based on 6600 average wind speeds for spring, summer and autumn, 2018. Based on the model, the theoretical efficiency of the machine was calculated, which, under the conditions of Góreckie Lake, amounted to 75,000 m3 per year.

Development and Field Testing of an Inclined Flanged Compact Diffuser for a Micro Wind Turbine

2014 ◽  
Author(s):  
Sandip Kale ◽  
S. N. Sapali
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Wind Turbines ◽  
Energy Production ◽  
Cost Effective ◽  
Field Testing ◽  
International Electrotechnical Commission ◽  
Average Wind Speed ◽  
Average Wind ◽  
Power Curves

Micro wind turbines installed in various applications, experience average wind speed for most of the time during operations. Power produced by the wind turbine is proportional to the cubic power of the wind velocity and a small increase in wind velocity results increases power output significantly. The approach wind velocity can be increased by covering traditional wind turbine with a diffuser. Researchers are continuously working to develop a compact, lightweight, cost effective and feasible diffuser for wind turbines. The present work carried out to develop a diffuser with these stated objectives. A compact, lightweight inclined flanged diffuser developed for a micro wind turbine. Bare micro wind turbine and wind turbine covered with developed efficient inclined flanged diffuser tested in the field as per International Electrotechnical Commission (IEC) standards and results presented in the form of power curves. The prediction of annual energy production for both wind turbines determined as per IEC standards.

scholarly journals Rapid coral mortality following unusually calm and hot conditions on Iriomote, Japan

F1000Research ◽  
2018 ◽  
Vol 6 ◽  
pp. 1728 ◽  
Author(s):  
Andrew H Baird ◽  
Sally A. Keith ◽  
Erika Woolsey ◽  
Ryuta Yoshida ◽  
Tohru Naruse
Keyword(s):  
Water Movement ◽  
Sea Surface ◽  
Bleaching Event ◽  
Coral Mortality ◽  
Average Wind Speed ◽  
Common Cause ◽  
Wind Speeds ◽  
Average Wind ◽  
The Mean ◽  
Low Wind Speeds

Coral bleaching can be induced by many different stressors, however, the most common cause of mass bleaching in the field is higher than average sea surface temperatures (SST). Here, we describe an unusual bleaching event that followed very calm sea conditions combined with higher than average SST. Patterns of mortality differed from typical bleaching in four ways: 1) mortality was very rapid; 2) a different suite of species were most affected; 3) tissue mortality in Acropora spp. was often restricted to the center of the colony; 4) the event occurred early in summer. The two weeks prior to the event included 8 days where the average wind speed was less than 3 ms-1. In addition, SSTs in the weeks preceding and during the event were 1.0-1.5°C higher than the mean for the last 30 years. We hypothesize that this unusual bleaching event was caused by anoxia resulting from a lack of water movement induced by low wind speeds combined with high SST.

The excitation of atmospheric oscillations

1963 ◽  
Vol 274 (1356) ◽  
pp. 91-121 ◽  
Keyword(s):  
Large Scale ◽  
Ground Level ◽  
Atmospheric Temperature ◽  
Direct Absorption ◽  
Pressure Oscillations ◽  
Thermal Mechanism ◽  
Atmospheric Temperature Profile ◽  
Water Vapour Absorption ◽  
The Vertical Distribution ◽  
Quiet Day

An investigation is made into the excitation of large-scale atmospheric oscillations by the direct absorption of incoming solar radiation by atmospheric ozone. The atmospheric temperature profile is chosen to agree favourably with the main features of the observed temperature distribution, particularly as regards the maximum around the 50 km height; this distribution is shown to be non-resonant as far as the solar semidiurnal component is concerned. The excited solar diurnal, semidiurnal and terdiurnal pressure oscillations are computed and we find that although the largest Fourier component in the heating is the diurnal term , the tide it excites is small in keeping with observation. On the other hand, the excited semidiurnal oscillation is much larger than that due to any previously considered thermal mechanism . It is found that the main semidiurnal and terdiurnal tides generated by the direct absorption of insolation by ozone as calculated in the present work, together with published results regarding water vapour absorption, can adequately account for the observed values at ground level. The seasonal variations of the semi and terdiurnal tides are also calculated and these agree extremely well with observation. Finally, the change of phase of 180° in the vertical distribution of the solar semidiurnal oscillation, which is expected from the analysis of the quiet day magnetic variation, is accounted for in the present work.

scholarly journals Formation and distribution of sea-surface microlayers

2010 ◽  
Vol 7 (4) ◽  
pp. 5719-5755 ◽  
Author(s):  
O. Wurl ◽  
E. Wurl ◽  
L. Miller ◽  
K. Johnson ◽  
S. Vagle
Keyword(s):  
Wind Speed ◽  
Primary Production ◽  
Sea Surface ◽  
Surface Microlayer ◽  
Average Wind Speed ◽  
Wind Speeds ◽  
Average Wind ◽  
The Pacific ◽  
Sea Surface Microlayer ◽  
Natural Surfactants

Abstract. Results from a study of surfactants in the sea-surface microlayer (SML) in different regions of the ocean (subtropical, temperate, polar) suggest that this interfacial layer between the ocean and atmosphere covers the ocean's surface to a significant extent. Threshold values at which primary production acts as a significant source of natural surfactants have been derived from the enrichment of surfactants in the SML relative to underlying water and local primary production. Similarly, we have also derived a wind speed threshold at which the SML is disrupted. The results suggest that surfactant enrichment in the SML is typically greater in oligotrophic regions of the ocean than in more productive waters. Furthermore, the enrichment of surfactants persisted at wind speeds of up to 10 m s−1 without any observed depletion above 5 m s−1. This suggests that the SML is stable enough to exist even at the global average wind speed of 6.6 m s−1. Global maps of primary production and wind speed are used to estimate the ocean's SML coverage. The maps indicate that wide regions of the Pacific and Atlantic Oceans between 30° N and 30° S are more significantly affected by the SML than northern of 30° N and southern of 30° S due to higher productivity (spring/summer blooms) and wind speeds exceeding 12 m s−1 respectively.

scholarly journals Remaining Useful Life Estimation of Wind Turbine Blades under Variable Wind Speed Conditions Using Particle Filters

2018 ◽  
Vol 10 (1) ◽  
Author(s):  
Bhavana Valeti ◽  
Shamim N. Pakzad
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Remaining Useful Life ◽  
Structural Components ◽  
Wind Turbine Blades ◽  
Average Wind Speed ◽  
Average Wind ◽  
Useful Life ◽  
Variable Wind

Rotor blades are the most complex structural components in a wind turbine and are subjected to continuous cyclic loads of wind and self-weight variation. The structural maintenance operations in wind farms are moving towards condition based maintenance (CBM) to avoid premature failures. For this, damage prognosis with remaining useful life (RUL) estimation in wind turbine blades is necessary. Wind speed variation plays an important role influencing the loading and consequently the RUL of the structural components. This study investigates the effect of variable wind speed between the cutin and cut-out speeds of a typical wind farm on the RUL of a damage detected wind turbine blade as opposed to average wind speed assumption. RUL of wind turbine blades are estimated for different initial crack sizes using particle filtering method which forecasts the evolution of fatigue crack addressing the non-linearity and uncertainty in crack propagation. The stresses on a numerically simulated life size onshore wind turbine blade subjected to the above wind speed loading cases are used in computing the crack propagation observation data for particle filters. The effects of variable wind speed on the damage propagation rates and RUL in comparison to those at an average wind speed condition are studied and discussed.

scholarly journals The super-turbine wind power conversion paradox: using machine learning to reduce errors caused by Jensen's inequality

2019 ◽  
Vol 4 (2) ◽  
pp. 343-353 ◽  
Author(s):  
Tyler C. McCandless ◽  
Sue Ellen Haupt
Keyword(s):  
Machine Learning ◽  
Standard Deviation ◽  
Wind Speed ◽  
Wind Power ◽  
Power Conversion ◽  
Jensen’S Inequality ◽  
Jensen's Inequality ◽  
Average Wind Speed ◽  
Wind Speeds ◽  
Average Wind

Abstract. Wind power is a variable generation resource and therefore requires accurate forecasts to enable integration into the electric grid. Generally, the wind speed is forecast for a wind plant and the forecasted wind speed is converted to power to provide an estimate of the expected generating capacity of the plant. The average wind speed forecast for the plant is a function of the underlying meteorological phenomena being predicted; however, the wind speed for each turbine at the farm is also a function of the local terrain and the array orientation. Conversion algorithms that assume an average wind speed for the plant, i.e., the super-turbine power conversion, assume that the effects of the local terrain and array orientation are insignificant in producing variability in the wind speeds across the turbines at the farm. Here, we quantify the differences in converting wind speed to power at the turbine level compared with a super-turbine power conversion for a hypothetical wind farm of 100 2 MW turbines as well as from empirical data. The simulations with simulated turbines show a maximum difference of approximately 3 % at 11 m s−1 with a 1 m s−1 standard deviation of wind speeds and 8 % at 11 m s−1 with a 2 m s−1 standard deviation of wind speeds as a consequence of Jensen's inequality. The empirical analysis shows similar results with mean differences between converted wind speed to power and measured power of approximately 68 kW per 2 MW turbine. However, using a random forest machine learning method to convert to power reduces the error in the wind speed to power conversion when given the predictors that quantify the differences due to Jensen's inequality. These significant differences can lead to wind power forecasters overestimating the wind generation when utilizing a super-turbine power conversion for high wind speeds, and indicate that power conversion is more accurately done at the turbine level if no other compensatory mechanism is used to account for Jensen's inequality.

Sign in / Sign up

Export Citation Format

Share Document