scholarly journals Modelling Daily Mean Surface Air Temperature Calculated from Different Methods and Its Impact on Urban-Related Warming Evaluations over Guangzhou and Shenzhen Using the WRF Model

Atmosphere ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 48
Author(s):  
Deming Zhao ◽  
Jian Wu
Keyword(s):  
Air Temperature ◽  
Diurnal Cycle ◽  
Climate Model ◽  
Dynamical Downscaling ◽  
Spatial Scales ◽  
Wrf Model ◽  
Surface Air Temperature ◽  
Urban Surface ◽  
Surface Expansion ◽  
Urban Surface Expansion

The impacts of urban surface expansion, based on satellite-derived data displaying urban surface expansion in China at different spatial scales from 1980 to 2016, were investigated using nested dynamical downscaling methods with the Weather Research and Forecasting (WRF) regional climate model at a 3.3-km resolution over a city and city cluster scale. Urban-related warming, based on daily mean surface air temperature at 2 m (SAT), calculated from the averages of four time records each day (00, 06, 12, and 18 h UTC, T4) and averages of SAT maximum (Tmax) and minimum (Tmin) (Txn), was evaluated. Differences in urban-related warming contributions calculated using T4 and Txn were small, whereas annual mean SAT and trends calculated using Txn were respectively and significantly larger and smaller than those calculated using T4 over Guangzhou and Shenzhen, excluding the trends over middle-northern Shenzhen. The differences in annual mean SAT calculated using T4 and Txn are attributed to nonlinear or asymmetric variations with time for the diurnal cycle of SAT. Meanwhile, differences in trends between T4 and Txn are interpreted as a strong trend for Tmin and a weak one for Tmax, which mitigated the trend for Txn. The impacts on the evaluations of urban-related warming contributions calculated from different methods were the largest over the areas classified as urban surfaces in both time periods (U2U), especially during intense urban-surface-expansion periods between 2000 and 2016. The subregional performances in the changes in annual mean SAT, trends, and urban-related warming are attributed to urban-surface-expansion, which induced varied changes in the diurnal cycle due to asymmetric warming during the daytime and nighttime over different subregions.

scholarly journals Dynamical Downscaling of Surface Air Temperature and Wind Field Variabilities over the Southeastern Levantine Basin, Mediterranean Sea

Climate ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 150
Author(s):  
Mohamed ElBessa ◽  
Saad Mesbah Abdelrahman ◽  
Kareem Tonbol ◽  
Mohamed Shaltout
Keyword(s):  
Wind Speed ◽  
Air Temperature ◽  
Wind Field ◽  
Climate Model ◽  
Dynamical Downscaling ◽  
Surface Wind ◽  
Surface Air Temperature ◽  
Warming Trend ◽  
Climate Data ◽  
Near Surface

The characteristics of near surface air temperature and wind field over the Southeastern Levantine (SEL) sub-basin during the period 1979–2018 were simulated. The simulation was carried out using a dynamical downscaling approach, which requires running a regional climate model system (RegCM-SVN6994) on the study domain, using lower-resolution climate data (i.e., the fifth generation of ECMWF atmospheric reanalysis of the global climate ERA5 datasets) as boundary conditions. The quality of the RegCM-SVN simulation was first verified by comparing its simulations with ERA5 for the studied region from 1979 to 2018, and then with the available five WMO weather stations from 2007 to 2018. The dynamical downscaling results proved that RegCM-SVN in its current configuration successfully simulated the observed surface air temperature and wind field. Moreover, RegCM-SVN was proved to provide similar or even better accuracy (during extreme events) than ERA5 in simulating both surface air temperature and wind speed. The simulated annual mean T2m by RegCM-SVN (from 1979 to 2018) was 20.9 °C, with a positive warming trend of 0.44 °C/decade over the study area. Moreover, the annual mean wind speed by RegCM-SVN was 4.17 m/s, demonstrating an annual negative trend of wind speed over 92% of the study area. Surface air temperatures over SEL mostly occurred within the range of 4–31 °C; however, surface wind speed rarely exceeded 10 m/s. During the study period, the seasonal features of T2m showed a general warming trend along the four seasons and showed a wind speed decreasing trend during spring and summer. The results of the RegCM-SVN simulation constitute useful information that could be utilized to fully describe the study area in terms of other atmospheric parameters.

Contribution of Urban Surface Expansion to Regional Warming in Beijing, China

2017 ◽  
Vol 56 (6) ◽  
pp. 1551-1559 ◽  
Author(s):  
Deming Zhao ◽  
Jian Wu
Keyword(s):  
Urban Areas ◽  
Dynamical Downscaling ◽  
Urban Surface ◽  
Anthropogenic Activity ◽  
Regional Warming ◽  
Considerable Uncertainty ◽  
Surface Areas ◽  
Surface Expansion ◽  
Urban Surface Expansion ◽  
Beijing China

AbstractThe contribution of urban surface expansion to regional warming as detected from meteorological observational station data may vary with considerable uncertainty because of the spatial heterogeneity of such data—a situation that promotes a requirement for numerical model-based investigations. Satellite-based images from 1980 to 2016 that have fine resolution over three city clusters and that display the urban surface expansion in China from rapid economic development and anthropogenic activity were used to perform 37-yr nested dynamical downscaling using the Weather Research and Forecasting (WRF) Model. The urban surface areas in Beijing, China, expressed marked expansion in the last 37 years. The contribution of urban surface expansion to regional warming was approximately 22% of the overall warming in Beijing and was stronger in the plains areas of Beijing (42%). The contributions to land-use grids that changed from nonurban (in 1980) to urban (in 2016; N2U) were much stronger than those to grids that were classified as urban in both time periods (U2U), which were closer to the values of urban areas (including N2U and U2U) because of the intense increase in urban surface areas. Urban-related warming expressed marked annual variation and was greater in the warm seasons and smaller in the cold seasons. The greater increase in surface air temperature (SAT) minimum and the weaker SAT maximum accounted for the decreased diurnal temperature range.

scholarly journals A Comparison between One-Step and Two-Step Nesting Strategy in the Dynamical Downscaling of Regional Climate Model COSMO-CLM at 2.2 km Driven by ERA5 Reanalysis

Atmosphere ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 260
Author(s):  
Mario Raffa ◽  
Alfredo Reder ◽  
Marianna Adinolfi ◽  
Paola Mercogliano
Keyword(s):  
Regional Climate Model ◽  
Climate Model ◽  
Dynamical Downscaling ◽  
Spatial Scales ◽  
Regional Climate ◽  
Weather Forecast ◽  
Medium Range Weather Forecast ◽  
Spatial And Temporal Scales ◽  
Starting Point ◽  
One Step

Recently, the European Centre for Medium Range Weather Forecast (ECMWF) has released a new generation of reanalysis, acknowledged as ERA5, representing at the present the most plausible picture for the current climate. Although ERA5 enhancements, in some cases, its coarse spatial resolution (~31 km) could still discourage a direct use of precipitation fields. Such a gap could be faced dynamically downscaling ERA5 at convection permitting scale (resolution < 4 km). On this regard, the selection of the most appropriate nesting strategy (direct one-step against nested two-step) represents a pivotal issue for saving time and computational resources. Two questions may be raised within this context: (i) may the dynamical downscaling of ERA5 accurately represents past precipitation patterns? and (ii) at what extent may the direct nesting strategy performances be adequately for this scope? This work addresses these questions evaluating two ERA5-driven experiments at ~2.2 km grid spacing over part of the central Europe, run using the regional climate model COSMO-CLM with different nesting strategies, for the period 2007–2011. Precipitation data are analysed at different temporal and spatial scales with respect to gridded observational datasets (i.e., E-OBS and RADKLIM-RW) and existing reanalysis products (i.e., ERA5-Land and UERRA). The present work demonstrates that the one-step experiment tendentially outperforms the two-step one when there is no spectral nudging, providing results at different spatial and temporal scales in line with the other existing reanalysis products. However, the results can be highly model and event dependent as some different aspects might need to be considered (i.e., the nesting strategies) during the configuration phase of the climate experiments. For this reason, a clear and consolidated recommendation on this topic cannot be stated. Such a level of confidence could be achieved in future works by increasing the number of cities and events analysed. Nevertheless, these promising results represent a starting point for the optimal experimental configuration assessment, in the frame of future climate studies.

Evaluating temperature extremes in CMIP6 simulations using statistically proper evaluation methods

2021 ◽  
Author(s):  
Thordis Thorarinsdottir ◽  
Jana Sillmann ◽  
Marion Haugen ◽  
Nadine Gissibl ◽  
Marit Sandstad
Keyword(s):  
Air Temperature ◽  
Model Evaluation ◽  
Climate Models ◽  
Climate Model ◽  
Mean Squared Error ◽  
Surface Air Temperature ◽  
Cmip5 Models ◽  
Model Output ◽  
Intergovernmental Panel ◽  
Near Surface

&lt;p&gt;Reliable projections of extremes in near-surface air temperature (SAT) by climate models become more and more important&amp;#160;as global warming is leading to significant increases in the hottest days and decreases in coldest nights around the world with considerable impacts on various sectors, such as agriculture, health and tourism.&lt;/p&gt;&lt;p&gt;Climate model evaluation has traditionally been performed by comparing summary statistics that are derived from simulated model output and corresponding observed quantities using, for instance, the root mean squared error (RMSE) or mean bias as also used in the model evaluation chapter of the fifth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC AR5). Both RMSE and mean bias compare averages over time and/or space, ignoring the variability, or the uncertainty, in the underlying values. Particularly when interested in the evaluation of climate extremes, climate models should be evaluated by comparing the probability distribution of model output to the corresponding distribution of observed data.&lt;/p&gt;&lt;p&gt;To address this shortcoming, we use the integrated quadratic distance (IQD) to compare distributions of simulated indices to the corresponding distributions from a data product. The IQD is the proper divergence associated with the proper continuous ranked probability score (CRPS) as it fulfills essential decision-theoretic properties for ranking competing models and testing equality in performance, while also assessing the full distribution.&lt;/p&gt;&lt;p&gt;The IQD is applied to evaluate CMIP5 and CMIP6 simulations of monthly maximum (TXx) and minimum near-surface air temperature (TNn) over the data-dense regions Europe and North America against both observational and reanalysis datasets. There is not a notable difference between the model generations CMIP5 and CMIP6 when the model simulations are compared against the observational dataset HadEX2. However, the CMIP6 models show a better agreement with the reanalysis ERA5 than CMIP5 models, with a few exceptions. Overall, the climate models show higher skill when compared against ERA5 than when compared against HadEX2. While the model rankings vary with region, season and index, the model evaluation is robust against changes in the grid resolution considered in the analysis.&lt;/p&gt;

scholarly journals <i>Brief communication</i> "A statistical validation for the cycles found in air temperature data using a Morlet wavelet-based method"

2010 ◽  
Vol 17 (3) ◽  
pp. 269-272 ◽  
Author(s):  
S. Nicolay ◽  
G. Mabille ◽  
X. Fettweis ◽  
M. Erpicum
Keyword(s):  
Air Temperature ◽  
Climate Model ◽  
Surface Air Temperature ◽  
Weather Forecast ◽  
Temperature Data ◽  
Temperature Time Series ◽  
Climatic Data ◽  
Statistical Validation ◽  
Confidence Levels ◽  
Temperature Time

Abstract. Recently, new cycles, associated with periods of 30 and 43 months, respectively, have been observed by the authors in surface air temperature time series, using a wavelet-based methodology. Although many evidences attest the validity of this method applied to climatic data, no systematic study of its efficiency has been carried out. Here, we estimate confidence levels for this approach and show that the observed cycles are significant. Taking these cycles into consideration should prove helpful in increasing the accuracy of the climate model projections of climate change and weather forecast.

scholarly journals Historical and idealized climate model experiments: an intercomparison of Earth system models of intermediate complexity

2013 ◽  
Vol 9 (3) ◽  
pp. 1111-1140 ◽  
Author(s):  
M. Eby ◽  
A. J. Weaver ◽  
K. Alexander ◽  
K. Zickfeld ◽  
A. Abe-Ouchi ◽  
...  
Keyword(s):  
Land Use ◽  
Carbon Cycle ◽  
Air Temperature ◽  
Climate Model ◽  
Surface Air Temperature ◽  
Carbon Fluxes ◽  
Carbon Uptake ◽  
Earth System ◽  
Model Experiments ◽  
Earth System Models

Abstract. Both historical and idealized climate model experiments are performed with a variety of Earth system models of intermediate complexity (EMICs) as part of a community contribution to the Intergovernmental Panel on Climate Change Fifth Assessment Report. Historical simulations start at 850 CE and continue through to 2005. The standard simulations include changes in forcing from solar luminosity, Earth's orbital configuration, CO2, additional greenhouse gases, land use, and sulphate and volcanic aerosols. In spite of very different modelled pre-industrial global surface air temperatures, overall 20th century trends in surface air temperature and carbon uptake are reasonably well simulated when compared to observed trends. Land carbon fluxes show much more variation between models than ocean carbon fluxes, and recent land fluxes appear to be slightly underestimated. It is possible that recent modelled climate trends or climate–carbon feedbacks are overestimated resulting in too much land carbon loss or that carbon uptake due to CO2 and/or nitrogen fertilization is underestimated. Several one thousand year long, idealized, 2 × and 4 × CO2 experiments are used to quantify standard model characteristics, including transient and equilibrium climate sensitivities, and climate–carbon feedbacks. The values from EMICs generally fall within the range given by general circulation models. Seven additional historical simulations, each including a single specified forcing, are used to assess the contributions of different climate forcings to the overall climate and carbon cycle response. The response of surface air temperature is the linear sum of the individual forcings, while the carbon cycle response shows a non-linear interaction between land-use change and CO2 forcings for some models. Finally, the preindustrial portions of the last millennium simulations are used to assess historical model carbon-climate feedbacks. Given the specified forcing, there is a tendency for the EMICs to underestimate the drop in surface air temperature and CO2 between the Medieval Climate Anomaly and the Little Ice Age estimated from palaeoclimate reconstructions. This in turn could be a result of unforced variability within the climate system, uncertainty in the reconstructions of temperature and CO2, errors in the reconstructions of forcing used to drive the models, or the incomplete representation of certain processes within the models. Given the forcing datasets used in this study, the models calculate significant land-use emissions over the pre-industrial period. This implies that land-use emissions might need to be taken into account, when making estimates of climate–carbon feedbacks from palaeoclimate reconstructions.

scholarly journals Biogenic isoprene emissions driven by regional weather predictions using different initialization methods: case studies during the SEAC<sup>4</sup>RS and DISCOVER-AQ airborne campaigns

2017 ◽  
Vol 10 (8) ◽  
pp. 3085-3104 ◽  
Author(s):  
Min Huang ◽  
Gregory R. Carmichael ◽  
James H. Crawford ◽  
Armin Wisthaler ◽  
Xiwu Zhan ◽  
...  
Keyword(s):  
Case Studies ◽  
Air Temperature ◽  
Initial Conditions ◽  
Wrf Model ◽  
Surface Air Temperature ◽  
Heat Fluxes ◽  
Aircraft Observation ◽  
Near Surface ◽  
Boundary Layer Height ◽  
Small Scales

Abstract. Land and atmospheric initial conditions of the Weather Research and Forecasting (WRF) model are often interpolated from a different model output. We perform case studies during NASA's SEAC4RS and DISCOVER-AQ Houston airborne campaigns, demonstrating that using land initial conditions directly downscaled from a coarser resolution dataset led to significant positive biases in the coupled NASA-Unified WRF (NUWRF, version 7) surface and near-surface air temperature and planetary boundary layer height (PBLH) around the Missouri Ozarks and Houston, Texas, as well as poorly partitioned latent and sensible heat fluxes. Replacing land initial conditions with the output from a long-term offline Land Information System (LIS) simulation can effectively reduce the positive biases in NUWRF surface air temperature by ∼ 2 °C. We also show that the LIS land initialization can modify surface air temperature errors almost 10 times as effectively as applying a different atmospheric initialization method. The LIS-NUWRF-based isoprene emission calculations by the Model of Emissions of Gases and Aerosols from Nature (MEGAN, version 2.1) are at least 20 % lower than those computed using the coarser resolution data-initialized NUWRF run, and are closer to aircraft-observation-derived emissions. Higher resolution MEGAN calculations are prone to amplified discrepancies with aircraft-observation-derived emissions on small scales. This is possibly a result of some limitations of MEGAN's parameterization and uncertainty in its inputs on small scales, as well as the representation error and the neglect of horizontal transport in deriving emissions from aircraft data. This study emphasizes the importance of proper land initialization to the coupled atmospheric weather modeling and the follow-on emission modeling. We anticipate it to also be critical to accurately representing other processes included in air quality modeling and chemical data assimilation. Having more confidence in the weather inputs is also beneficial for determining and quantifying the other sources of uncertainties (e.g., parameterization, other input data) of the models that they drive.

scholarly journals Biogeophysical impacts of peatland forestation on regional climate changes in Finland

2014 ◽  
Vol 11 (24) ◽  
pp. 7251-7267 ◽  
Author(s):  
Y. Gao ◽  
T. Markkanen ◽  
L. Backman ◽  
H. M. Henttonen ◽  
J.-P. Pietikäinen ◽  
...  
Keyword(s):  
Land Cover ◽  
Air Temperature ◽  
Surface Albedo ◽  
Climate Model ◽  
Regional Climate ◽  
Surface Air Temperature ◽  
Forest Growth ◽  
Background Information ◽  
Snow Melting ◽  
Melting Period

Abstract. Land cover changes can impact the climate by influencing the surface energy and water balance. Naturally treeless or sparsely treed peatlands were extensively drained to stimulate forest growth in Finland over the second half of 20th century. The aim of this study is to investigate the biogeophysical effects of peatland forestation on regional climate in Finland. Two sets of 18-year climate simulations were done with the regional climate model REMO by using land cover data based on pre-drainage (1920s) and post-drainage (2000s) Finnish national forest inventories. In the most intensive peatland forestation area, located in the middle west of Finland, the results show a warming in April of up to 0.43 K in monthly-averaged daily mean 2 m air temperature, whereas a slight cooling from May to October of less than 0.1 K in general is found. Consequently, snow clearance days over that area are advanced up to 5 days in the mean of 15 years. No clear signal is found for precipitation. Through analysing the simulated temperature and energy balance terms, as well as snow depth over five selected subregions, a positive feedback induced by peatland forestation is found between decreased surface albedo and increased surface air temperature in the snow-melting period. Our modelled results show good qualitative agreements with the observational data. In general, decreased surface albedo in the snow-melting period and increased evapotranspiration in the growing period are the most important biogeophysical aspects induced by peatland forestation that cause changes in climate. The results from this study can be further integrally analysed with biogeochemical effects of peatland forestation to provide background information for adapting future forest management to mitigate climate warming effects. Moreover, they provide insights about the impacts of projected forestation of tundra at high latitudes due to climate change.

scholarly journals Seasonal Surface Air Temperature and Precipitation in the FSU Climate Model Coupled to the CLM2

2005 ◽  
Vol 18 (16) ◽  
pp. 3217-3228 ◽  
Author(s):  
D. W. Shin ◽  
S. Cocke ◽  
T. E. LaRow ◽  
James J. O’Brien
Keyword(s):  
Heat Flux ◽  
Air Temperature ◽  
Climate Model ◽  
Initial Conditions ◽  
Sensible Heat Flux ◽  
Surface Air Temperature ◽  
Community Land Model ◽  
Temperature And Precipitation ◽  
The Impact ◽  
Convective Scheme

Abstract The current Florida State University (FSU) climate model is upgraded by coupling the National Center for Atmospheric Research (NCAR) Community Land Model Version 2 (CLM2) as its land component in order to make a better simulation of surface air temperature and precipitation on the seasonal time scale, which is important for crop model application. Climatological and seasonal simulations with the FSU climate model coupled to the CLM2 (hereafter FSUCLM) are compared to those of the control (the FSU model with the original simple land surface treatment). The current version of the FSU model is known to have a cold bias in the temperature field and a wet bias in precipitation. The implementation of FSUCLM has reduced or eliminated this bias due to reduced latent heat flux and increased sensible heat flux. The role of the land model in seasonal simulations is shown to be more important during summertime than wintertime. An additional experiment that assimilates atmospheric forcings produces improved land-model initial conditions, which in turn reduces the biases further. The impact of various deep convective parameterizations is examined as well to further assess model performance. The land scheme plays a more important role than the convective scheme in simulations of surface air temperature. However, each convective scheme shows its own advantage over different geophysical locations in precipitation simulations.

scholarly journals Panama’s Current Climate Replicability in a Non-Hydrostatic Regional Climate Model Nested in an Atmospheric General Circulation Model

Atmosphere ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1543
Author(s):  
Reinhardt Pinzón ◽  
Noriko N. Ishizaki ◽  
Hidetaka Sasaki ◽  
Tosiyuki Nakaegawa
Keyword(s):  
Regional Climate Model ◽  
Air Temperature ◽  
General Circulation ◽  
Climate Model ◽  
Regional Climate ◽  
Surface Air Temperature ◽  
Circulation Model ◽  
Horizontal Resolution ◽  
Temperature And Precipitation ◽  
Current Climate

To simulate the current climate, a 20-year integration of a non-hydrostatic regional climate model (NHRCM) with grid spacing of 5 and 2 km (NHRCM05 and NHRCM02, respectively) was nested within the AGCM. The three models did a similarly good job of simulating surface air temperature, and the spatial horizontal resolution did not affect these statistics. NHRCM02 did a good job of reproducing seasonal variations in surface air temperature. NHRCM05 overestimated annual mean precipitation in the western part of Panama and eastern part of the Pacific Ocean. NHRCM05 is responsible for this overestimation because it is not seen in MRI-AGCM. NHRCM02 simulated annual mean precipitation better than NHRCM05, probably due to a convection-permitting model without a convection scheme, such as the Kain and Fritsch scheme. Therefore, the finer horizontal resolution of NHRCM02 did a better job of replicating the current climatological mean geographical distributions and seasonal changes of surface air temperature and precipitation.

Sign in / Sign up

Export Citation Format

Share Document