scholarly journals Fullerene-to-MWCNT Structural Evolution Synthesized by Arc Discharge Plasma

2018 ◽  
Vol 4 (4) ◽  
pp. 58 ◽  
Author(s):  
Muhammad Roslan ◽  
Misbahul Abd Rahman ◽  
Muhamad Jofri ◽  
Kashif Chaudary ◽  
Azam Mohamad ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Vacuum Chamber ◽  
Discharge Plasma ◽  
Arc Discharge ◽  
Structural Evolution ◽  
Ex Situ ◽  
Multi Walled Carbon Nanotubes ◽  
Fullerene Formation ◽  
Walled Carbon Nanotubes ◽  
Graphite Rods

The growth of multi-walled carbon nanotubes (MWCNTs) has been extensively studied using electron microscopy. The ex situ structural behavior was examined to investigate the growth of the MWCNTs under different environments and pressures using electron microscopy. The arc discharge plasma technique was applied to synthesize the MWCNTs by evaporating carbon through the arc plasma between two cylindrical graphite rods, with a background pressure of 10−2 to 102 mbar, inside a vacuum chamber under different ambient environments. The results showed that long MWCNT structures were successfully grown. We suggest that the mechanism involves: (i) fullerene formation; (ii) the elongation of fullerenes; and (iii) the growth of MWCNTs. Agglomeration with other structures then forms MWCNT bundles. We note that the pressure and environment in the vacuum chamber can affect the structure of the MWCNTs.

Bulk synthesis of multi-walled carbon nanotubes by AC arc discharge method

2017 ◽  
Vol 231 (3) ◽  
pp. 141-151 ◽  
Author(s):  
KK Singh ◽  
SK Chaudhary ◽  
R Venugopal ◽  
A Gaurav
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Arc Discharge ◽  
Pure Graphite ◽  
Multi Walled Carbon Nanotubes ◽  
Different Shapes ◽  
Ac Arc ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This work proposes the production of multi-walled carbon nanotubes by AC arc discharging of spectroscopically pure graphite electrodes of different shapes, that is, movable cylindrical and stationary rectangular electrode by manual metal arc welding setup. Continuous arc was generated by maintaining the gap of about 3 mm between the electrodes which in turn formed the plasma zone. Vaporization of carbon cations followed by sudden quenching paved the way for formation of carbon nantotubes. Nanotubes produced were deposited on the stationary graphite electrode in the form of soot. Further extraction of the nanoparticles from the soot was performed by conducting series of purification processes which will be discussed in upcoming chapters. Morphology and purity of the extracted nanotubes were investigated by X-ray diffraction, scanning electron microscopy, field-emission scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. Following the characterization process, it was observed that the so-produced nanotubes were of different shapes, that is, carbon cone nanotubes, nanocapsules, nanoparticles and branching type and randomly oriented. The length of the nanotubes varied from 231 to 561 nm, whereas diameter was found to be in the range of 14–55 nm.

The Effect of Calcination on Multi-Walled Carbon Nanotubes Produced by Dc-Arc Discharge

2008 ◽  
Vol 8 (7) ◽  
pp. 3539-3544 ◽  
Author(s):  
Sreejarani K. Pillai ◽  
Willem G. Augustyn ◽  
Margaretha H. Rossouw ◽  
Robert I. McCrindle
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Structural Integrity ◽  
Arc Discharge ◽  
Simple Method ◽  
Helium Atmosphere ◽  
Different Temperatures ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Dc Arc

Multi-walled carbon nanotubes were synthesized by dc-arc discharge in helium atmosphere and the effect of calcination at different temperatures ranging from 300–600 °C was studied in detail. The degree of degradation to the structural integrity of the multi-walled carbon nanotubes during the thermal process was studied by Raman spectroscopy, Scanning electron microscopy and High resolution transmission electron microscopy. The thermal behaviour of the as prepared and calcined samples was investigated by thermogravimetric analysis. Calcination in air at 400 °C for 2 hours was found to be an efficient and simple method to eliminate carbonaceous impurities from the nanotube bundles with minimal damage to the tube walls and length. The impurities were oxidized at a faster rate when compared to the nanotubes and gave good yield of about 50%. The nanotubes were observed to be damaged at temperature higher than 450 °C. The results show that this method is less destructive when compared liquid phase oxidation with 5 M HNO3.

scholarly journals Biocompatibility Characteristics of Titanium Coated with Multi Walled Carbon Nanotubes—Hydroxyapatite Nanocomposites

Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 224 ◽  
Author(s):  
Jung-Eun Park ◽  
Yong-Seok Jang ◽  
Tae-Sung Bae ◽  
Min-Ho Lee
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Sol Gel ◽  
Pure Titanium ◽  
Cell Proliferation And Differentiation ◽  
Transmission Electron ◽  
Proliferation And Differentiation ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Multi walled carbon nanotubes-hydroxyapatite (MWCNTs-HA) with various contents of MWCNTs was synthesized using the sol-gel method. MWCNTs-HA composites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). HA particles were generated on the surface of MWCNT. Produced MWCNTs-HA nanocomposites were coated on pure titanium (PT). Characteristic of the titanium coated MWCNTs-HA was evaluated by field-emission scanning electron microscopy (FE-SEM) and XRD. The results show that the titanium surface was covered with MWCNTs-HA nanoparticles and MWCNTs help form the crystalized hydroxyapatite. Furthermore, the MWCNTs-HA coated titanium was investigated for in vitro cellular responses. Cell proliferation and differentiation were improved on the surface of MWCNT-HA coated titanium.

Continuous Fixed-Bed Column Studies of Textile Effluent Treatment using Multi-Walled Carbon Nanotubes Originated from Rosmarinus officinalis Oil

2022 ◽  
Vol 10 (4) ◽  
pp. 22-30
Author(s):  
S. Valliammai ◽  
K. Gopal ◽  
R. Nithya ◽  
L. Rama Priya ◽  
D. Kavitha
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Service Time ◽  
Fixed Bed ◽  
Rosmarinus Officinalis ◽  
Time Model ◽  
Fixed Bed Column ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Bed Depth Service Time

A continuous adsorption study in a fixed-bed column was carried out using Multi-walled Carbon Nanotubes derived from Rosmarinus officinalis oil as an adsorbent for removing the textile dye Acid blue 40 from an aqueous solution. The adsorbent, MWNTs were prepared from Rosmarinus officinalis oil as a precursor to Fe/Mo catalyst supported on silica at 650 ºC under N2 atmosphere by spray pyrolysis process characterized by scanning electron microscopy, Transmission Electron microscopy, and Raman spectroscopy. The effects of adsorbent bed height (2–6 cm), initial ion concentration (20– 60 mg/L), and flow rate (10–30 mL/min) on the column performance were analyzed. The breakthrough curve was analyzed using the mathematical models of Thomas, Yoon-Nelson, and bed depth service time. The Thomas model at different conditions defined the behaviors of the breakthrough curves. The bed depth service time model showed good agreement with the experimental data. The high values of correlation coefficients (R2 0.9875) obtained indicate the validity of the bed depth service time model for the present column system.

Electron Microscopy Characterization of Platinum Catalysts Supported on Multi-walled Carbon Nanotubes

2012 ◽  
Vol 18 (S2) ◽  
pp. 1316-1317
Author(s):  
M.J. Guinel ◽  
N. Brodusch ◽  
R. Gauvin ◽  
Y. Verde-Gomez ◽  
B. Escobar-Morales
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Platinum Catalysts ◽  
Multi Walled Carbon Nanotubes ◽  
Microscopy Characterization ◽  
Walled Carbon Nanotubes

Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012.

scholarly journals Polymeric Composites Based on Polyurea Matrix Reinforced with Carbon Nanotubes

2017 ◽  
Vol 54 (1) ◽  
pp. 41-44 ◽  
Author(s):  
Maria Adina Vulcan ◽  
Celina Damian ◽  
Paul Octavian Stanescu ◽  
Eugeniu Vasile ◽  
Razvan Petre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This paper deals with the synthesis of polyurea and its use as polymer matrix for nanocomposites reinforced with multi-walled carbon nanotubes (MWCNT). Two types of materials were obtained during this research, the first cathegory uses the polyurea as matrix and the second one uses a mixture between epoxy resin and polyurea. The nanocomposites were characterized by Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Scanning Electron Microscopy (SEM) and Tensile Tests .The elastomeric features of nanocomposites were highlighted by the results which showed low value of Tg. Also higher thermal stability with ~40oC compared with commercial products (M20) were observed, but lower mechanical properties compared to neat polyurea.

scholarly journals Carbon Nanofibers from Carbon Nanotubes by 1.2 keVAr+Sputtering at Room Temperature

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Shuang-Xi Xue ◽  
Qin-Tao Li ◽  
Xian-Rui Zhao ◽  
Qin-Yi Shi ◽  
Zhi-Gang Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Carbon Nanofibers ◽  
Carbon Nanoparticles ◽  
Room Temperature ◽  
Ion Irradiation ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Carbon Nanowires

Multi-walled carbon nanotubes (MWCNTs) were irradiated by 1.2 keV Ar ion beams for 15–60 min at room temperature with current density of 60 µA/cm2. The morphology and microstructure are investigated by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The results show that carbon nanofibers are achieved after 60 min ion irradiation and the formation of carbon nanofibers proceeds through four periods, carbon nanotubes—amorphous carbon nanowires—carbon nanoparticles along the tube axis—conical protrusions on the nanoparticles surface—carbon nanofibers from the conical protrusions.

Ni/MWCNT-Supported Palladium Nanoparticles as Magnetic Catalysts for Selective Oxidation of Benzyl Alcohol

2013 ◽  
Vol 66 (5) ◽  
pp. 564 ◽  
Author(s):  
Mingmei Zhang ◽  
Qian Sun ◽  
Zaoxue Yan ◽  
Junjie Jing ◽  
Wei Wei ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Benzyl Alcohol ◽  
Bimetallic Nanoparticles ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray ◽  
Oxidation Of Benzyl Alcohol ◽  
Uniform Dispersion ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Well dispersed Pd@Ni bimetallic nanoparticles on multi-walled carbon nanotubes (Pd@Ni/MWCNT) are prepared and used as catalysts for the oxidation of benzyl alcohol. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy analysis, and X-ray diffraction were performed to characterise the synthesised catalyst. The results show a uniform dispersion of Pd@Ni nanoparticles on MWCNT with an average particle size of 4.0 nm. The as synthesised catalyst was applied to the oxidation of benzyl alcohol. A 99 % conversion of benzyl alcohol and a 98 % selectivity of benzaldehyde were achieved by using the Pd@Ni/MWCNT (Pd: 0.2 mmol) catalyst with water as a solvent and H2O2 as oxidant at 80°C. The catalytic activity of Pd@Ni/MWCNT towards benzyl alcohol is higher than that of a Pd/MWCNT catalyst at the same Pd loadings. The catalyst can be easily separated due to its magnetic properties.

Sign in / Sign up

Export Citation Format

Share Document