scholarly journals Pt-Sn Supported on Beta Zeolite with Enhanced Activity and Stability for Propane Dehydrogenation

Catalysts ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 25
Author(s):  
Su-Un Lee ◽  
You-Jin Lee ◽  
Soo-Jin Kwon ◽  
Jeong-Rang Kim ◽  
Soon-Yong Jeong
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
High Surface ◽  
Coke Formation ◽  
Propane Dehydrogenation ◽  
Coke Deposition ◽  
Beta Zeolite ◽  
Lower Amount ◽  
Metal Catalyst ◽  
Beta Zeolites

With the growing global propylene demand, propane dehydrogenation (PDH) has attracted great attention for on-purpose propylene production. However, its industrial application is limited because catalysts suffer from rapid deactivation due to coke deposition and metal catalyst sintering. To enhance metal catalyst dispersion and coke resistance, Pt-based catalysts have been widely investigated with various porous supports. In particular, zeolite can benefit from large surface area and acid sites, which favors high metal dispersion and promoting catalytic activity. In this work, we investigated the PDH catalytic properties of Beta zeolites as a support for Pt-Sn based catalysts. In comparison with Pt-Sn supported over θ-Al2O3 and amorphous silica (Q6), Beta zeolite-supported Pt-Sn catalysts exhibited a different reaction trend, achieving the best propylene selectivity after a proper period of reaction time. The different PDH catalytic behavior over Beta zeolite-supported Pt-Sn catalysts has been attributed to their physicochemical properties and reaction mechanism. Although Pt-Sn catalyst supported over Beta zeolite with low acidity showed low Pt dispersion, it formed a relatively lower amount of coke on PDH reaction and maintained a high surface area and active Pt surfaces, resulting in enhanced stability for PDH reaction. This work can provide a better understanding of zeolite-supported Pt-Sn catalysts to improve PDH catalytic activity with high selectivity and low coke formation.

scholarly journals Study of deactivation in mesocellular foam carbon (MCF-C) catalyst used in gas-phase dehydrogenation of ethanol

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yoottapong Klinthongchai ◽  
Seeroong Prichanont ◽  
Piyasan Praserthdam ◽  
Bunjerd Jongsomjit
Keyword(s):  
Catalytic Activity ◽  
Pore Size ◽  
Gas Phase ◽  
Surface Area ◽  
Active Sites ◽  
Operating Temperature ◽  
Coke Formation ◽  
Ethanol Conversion ◽  
Deactivation Of Catalyst ◽  
Dehydrogenation Of Ethanol

AbstractMesocellular foam carbon (MCF-C) is one the captivating materials for using in gas phase dehydrogenation of ethanol. Extraordinary, enlarge pore size, high surface area, high acidity, and spherical shape with interconnected pore for high diffusion. In contrary, the occurrence of the coke is a majority causes for inhibiting the active sites on catalyst surface. Thus, this study aims to investigate the occurrence of the coke to optimize the higher catalytic activity, and also to avoid the coke formation. The MCF-C was synthesized and investigated using various techniques. MCF-C was spent in gas-phase dehydrogenation of ethanol under mild conditions. The deactivation of catalyst was investigated toward different conditions. Effects of reaction condition including different reaction temperatures of 300, 350, and 400 °C on the deactivation behaviors were determined. The results indicated that the operating temperature at 400 °C significantly retained the lowest change of ethanol conversion, which favored in the higher temperature. After running reaction, the physical properties as pore size, surface area, and pore volume of spent catalysts were decreased owing to the coke formation, which possibly blocked the pore that directly affected to the difficult diffusion of reactant and caused to be lower in catalytic activity. Furthermore, a slight decrease in either acidity or basicity was observed owing to consumption of reactant at surface of catalyst or chemical change on surface caused by coke formation. Therefore, it can remarkably choose the suitable operating temperature to avoid deactivation of catalyst, and then optimize the ethanol conversion or yield of acetaldehyde.

scholarly journals Catalytic Hot Gas Cleanup of Biomass Gasification Producer Gas via Steam Reforming Using Nickel-Supported Clay Minerals

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1875
Author(s):  
Prashanth Reddy Buchireddy ◽  
Devin Peck ◽  
Mark Zappi ◽  
Ray Mark Bricka
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Steam Reforming ◽  
Catalyst Deactivation ◽  
Nickel Content ◽  
Coke Formation ◽  
Biomass Gasification ◽  
Supported Nickel Catalyst ◽  
Fuel Gas ◽  
Removal Efficiencies

Amongst the issues associated with the commercialization of biomass gasification, the presence of tars has been one of the most difficult aspects to address. Tars are an impurity generated from the gasifier and upon their condensation cause problems in downstream equipment including plugging, blockages, corrosion, and major catalyst deactivation. These problems lead to losses of efficiency as well as potential maintenance issues resulting from damaged processing units. Therefore, the removal of tars is necessary in order for the effective operation of a biomass gasification facility for the production of high-value fuel gas. The catalytic activity of montmorillonite and montmorillonite-supported nickel as tar removal catalysts will be investigated in this study. Ni-montmorillonite catalyst was prepared, characterized, and tested in a laboratory-scale reactor for its efficiency in reforming tars using naphthalene as a tar model compound. Efficacy of montmorillonite-supported nickel catalyst was tested as a function of nickel content, reaction temperature, steam-to-carbon ratio, and naphthalene loading. The results demonstrate that montmorillonite is catalytically active in removing naphthalene. Ni-montmorillonite had high activity towards naphthalene removal via steam reforming, with removal efficiencies greater than 99%. The activation energy was calculated for Ni-montmorillonite assuming first-order kinetics and was found to be 84.5 kJ/mole in accordance with the literature. Long-term activity tests were also conducted and showed that the catalyst was active with naphthalene removal efficiencies greater than 95% maintained over a 97-h test period. A little loss of activity was observed with a removal decrease from 97% to 95%. To investigate the decrease in catalytic activity, characterization of fresh and used catalyst samples was performed using thermogravimetric analysis, transmission electron microscopy, X-ray diffraction, and surface area analysis. The loss in activity was attributed to a decrease in catalyst surface area caused by nickel sintering and coke formation.

scholarly journals Effect of Mg Contents on Catalytic Activity and Coke Formation of Mesoporous Ni/Mg-Aluminate Spinel Catalyst for Steam Methane Reforming

Catalysts ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 828 ◽  
Author(s):  
Hyunjoung Kim ◽  
Young-Hee Lee ◽  
Hongjin Lee ◽  
Jeong-Cheol Seo ◽  
Kyubock Lee
Keyword(s):  
Catalytic Activity ◽  
Coke Formation ◽  
Coke Deposition ◽  
Methane Reforming ◽  
Reaction Conditions ◽  
Ni Catalysts ◽  
Steam Methane Reforming ◽  
Steam Methane ◽  
Spinel Catalysts ◽  
Mg Content

Ni catalysts are most suitable for a steam methane reforming (SMR) reaction considering the activity and the cost, although coke formation remains the main problem. Here, Ni-based spinel catalysts with various Mg contents were developed through the synthesis of mesoporous Mg-aluminate supports by evaporation-induced self-assembly followed by Ni loading via incipient wetness impregnation. The mesoporous Ni/Mg-aluminate spinel catalysts showed high coke resistance under accelerated reaction conditions (0.0014 gcoke/gcat·h for Ni/Mg30, 0.0050 gcoke/gcat·h for a commercial catalyst). The coke resistance of the developed catalyst showed a clear trend: the higher the Mg content, the lower the coke deposition. The Ni catalysts with the lower Mg content showed a higher surface area and smaller Ni particle size, which originated from the difference of the sintering resistance and the exsolution of Ni particles. Despite these advantageous attributes of Ni catalysts, the coke resistance was higher for the catalysts with the higher Mg content while the catalytic activity was dependent on the reaction conditions. This reveals that the enhanced basicity of the catalyst could be the major parameter for the reduction of coke deposition in the SMR reaction.

scholarly journals Metal Nanoparticles as Green Catalysts

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3602 ◽  
Author(s):  
Neel Narayan ◽  
Ashokkumar Meiyazhagan ◽  
Robert Vajtai
Keyword(s):  
Catalytic Activity ◽  
Composite Materials ◽  
Green Synthesis ◽  
Metal Nanoparticles ◽  
Surface Area ◽  
Significant Role ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Performance ◽  
Materials Development

Nanoparticles play a significant role in various fields ranging from electronics to composite materials development. Among them, metal nanoparticles have attracted much attention in recent decades due to their high surface area, selectivity, tunable morphologies, and remarkable catalytic activity. In this review, we discuss various possibilities for the synthesis of different metal nanoparticles; specifically, we address some of the green synthesis approaches. In the second part of the paper, we review the catalytic performance of the most commonly used metal nanoparticles and we explore a few roadblocks to the commercialization of the developed metal nanoparticles as efficient catalysts.

Large-scale and facile synthesis of a porous high-entropy alloy CrMnFeCoNi as an efficient catalyst

2020 ◽  
Vol 8 (35) ◽  
pp. 18318-18326 ◽  
Author(s):  
Hailong Peng ◽  
Yangcenzi Xie ◽  
Zicheng Xie ◽  
Yunfeng Wu ◽  
Wenkun Zhu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Large Scale ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Performance ◽  
High Entropy Alloy ◽  
Facile Synthesis ◽  
Efficient Catalyst ◽  
High Entropy

Porous high entropy alloy CrMnFeCoNi exhibited remarkable catalytic activity and stability toward p-nitrophenol hydrogenation. The enhanced catalytic performance not only resulted from the high surface area, but also from exposed high-index facets with terraces.

Sign in / Sign up

Export Citation Format

Share Document