scholarly journals Covalently Bonded Ir(IV) on Conducted Blue TiO2 for Efficient Electrocatalytic Oxygen Evolution Reaction in Acid Media

Catalysts ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1176
Author(s):  
Chau T. K. Nguyen ◽  
Ngoc Quang Tran ◽  
Thi Anh Le ◽  
Hyoyoung Lee

The stability of anode electrode has been a primary obstacle for the oxygen evolution reaction (OER) in acid media. We design Ir-oxygen of hydroxyl-rich blue TiO2 through covalent bonds (Ir–O2–2Ti) and investigate the outcome of favored exposure of different amounts of covalent Ir–oxygen linked to the conductive blue TiO2 in the acidic OER. The Ir-oxygen-blue TiO2 nanoclusters show a strong synergy in terms of improved conductivity and tiny amount usage of Ir by using blue TiO2 supporter, and enhanced stability using covalent Ir-oxygen-linking (i.e., Ir oxide) in acid media, leading to high acidic OER performance with a current density of 10 mA cm−2 at an overpotential of 342 mV, which is much higher than that of IrO2 at 438 mV in 0.1 M HClO4 electrolyte. Notably, the Ir–O2–2Ti has a great mass activity of 1.38 A/mgIr at an overpotential 350 mV, which is almost 27 times higher than the mass activity of IrO2 at the same overpotential. Therefore, our work provides some insight into non-costly, highly enhanced, and stable electrocatalysts for the OER in acid media.

Author(s):  
Taehyun Kwon ◽  
Heesu Yang ◽  
Minki Jun ◽  
Taekyung Kim ◽  
Jinwhan Joo ◽  
...  

The oxygen evolution reaction (OER) requires a large overpotential which undermines the stability of electrocatalysts, typically IrOx or RuOx. RuOx is particularly vulnerable to high overpotential in acidic media, due...


Author(s):  
Marisol Maril ◽  
Pablo Tobosque ◽  
Nataly Cisternas ◽  
Marie-Paule Delplancke ◽  
Jean Luc Delplancke ◽  
...  

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Ye Ji Kim ◽  
Ahyoun Lim ◽  
Jong Min Kim ◽  
Donghoon Lim ◽  
Keun Hwa Chae ◽  
...  

Abstract Despite highly promising characteristics of three-dimensionally (3D) nanostructured catalysts for the oxygen evolution reaction (OER) in polymer electrolyte membrane water electrolyzers (PEMWEs), universal design rules for maximizing their performance have not been explored. Here we show that woodpile (WP)-structured Ir, consisting of 3D-printed, highly-ordered Ir nanowire building blocks, improve OER mass activity markedly. The WP structure secures the electrochemically active surface area (ECSA) through enhanced utilization efficiency of the extended surface area of 3D WP catalysts. Moreover, systematic control of the 3D geometry combined with theoretical calculations and various electrochemical analyses reveals that facile transport of evolved O2 gas bubbles is an important contributor to the improved ECSA-specific activity. The 3D nanostructuring-based improvement of ECSA and ECSA-specific activity enables our well-controlled geometry to afford a 30-fold higher mass activity of the OER catalyst when used in a single-cell PEMWE than conventional nanoparticle-based catalysts.


2018 ◽  
Vol 54 (96) ◽  
pp. 13579-13582 ◽  
Author(s):  
Mingdao Zhang ◽  
Bao-Hui Zheng ◽  
Jing Xu ◽  
Na Pan ◽  
Jianghua Yu ◽  
...  

A simple and scalable strategy to construct 2D fewer-layer π-conjugated conductive metal–organic nanosheets was developed to enable ultrahigh mass activity (>200 times of RuO2) for the oxygen evolution reaction.


2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Linlin Cao ◽  
Qiquan Luo ◽  
Jiajia Chen ◽  
Lan Wang ◽  
Yue Lin ◽  
...  

Abstract Achieving active and stable oxygen evolution reaction (OER) in acid media based on single-atom catalysts is highly promising for cost-effective and sustainable energy supply in proton electrolyte membrane electrolyzers. Here, we report an atomically dispersed Ru1-N4 site anchored on nitrogen-carbon support (Ru-N-C) as an efficient and durable electrocatalyst for acidic OER. The single-atom Ru-N-C catalyst delivers an exceptionally intrinsic activity, reaching a mass activity as high as 3571 A gmetal−1 and turnover frequency of 3348 O2 h−1 with a low overpotential of 267 mV at a current density of 10 mA cm−2. The catalyst shows no evident deactivation or decomposition after 30-hour operation in acidic environment. Operando synchrotron radiation X-ray absorption spectroscopy and infrared spectroscopy identify the dynamic adsorption of single oxygen atom on Ru site under working potentials, and theoretical calculations demonstrate that the O-Ru1-N4 site is responsible for the high OER activity and stability.


2016 ◽  
Vol 4 (8) ◽  
pp. 3153-3153 ◽  
Author(s):  
Charles R. Lhermitte ◽  
J. Garret Verwer ◽  
Bart M. Bartlett

Correction for ‘Improving the stability and selectivity for the oxygen-evolution reaction on semiconducting WO3 photoelectrodes with a solid-state FeOOH catalyst’ by Charles R. Lhermitte et al., J. Mater. Chem. A, 2016, DOI: 10.1039/c5ta04747a.


Author(s):  
Huihui Liu ◽  
Haeseong Jang ◽  
Yu Wang ◽  
Min Gyu Kim ◽  
Haisen Li ◽  
...  

Recently reported non-noble metal-iridium mixed oxides not only exhibit excellent activity for the oxygen evolution reaction in acid media, but also reduce the cost. However, most of them fail to...


2021 ◽  
Author(s):  
Hiroaki Kobayashi ◽  
Yuuki Sugawara ◽  
Takeo Yamaguchi ◽  
Itaru Honma

A one-pot synthesis for graphene-deposited layered-type cobalt–manganese oxide remarkably enhanced its OER mass activity in alkaline water splitting.


2020 ◽  
Vol 142 (43) ◽  
pp. 18378-18386 ◽  
Author(s):  
Jie Yin ◽  
Jing Jin ◽  
Min Lu ◽  
Bolong Huang ◽  
Hong Zhang ◽  
...  

Author(s):  
Haisen Li ◽  
Huihui Liu ◽  
Qing Qin ◽  
Xien Liu

Lack of low-cost and efficient oxygen evolution reaction (OER) catalysts in acid media has significantly limited the development of proton exchange membrane water electrolysis, which can perfectly integrate with intermittent...


Sign in / Sign up

Export Citation Format

Share Document