scholarly journals Exergy-Based Analysis and Optimization of an Integrated Solar Combined-Cycle Power Plant

Entropy ◽  
2020 ◽  
Vol 22 (6) ◽  
pp. 655
Author(s):  
Louay Elmorsy ◽  
Tatiana Morosuk ◽  
George Tsatsaronis
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Weighted Average ◽  
Combined Cycle ◽  
Levelized Cost Of Electricity ◽  
Combined Cycle Power Plant ◽  
Cost Of Electricity ◽  
Specific Investment ◽  
Levelized Cost

The transition towards higher shares of electricity generation from renewable energy sources is shown to be significantly slower in developing countries with low-cost fossil fuel resources. Integrating conventional power plants with concentrated solar power may facilitate the transition towards a more sustainable power production. In this paper, a novel natural gas-fired integrated solar combined-cycle power plant was proposed, evaluated, and optimized with exergy-based methods. The proposed system utilizes the advantages of combined-cycle power plants, direct steam generation, and linear Fresnel collectors to provide 475 MW baseload power in Aswan, Egypt. The proposed system is found to reach exergetic efficiencies of 50.7% and 58.1% for day and night operations, respectively. In economic analysis, a weighted average levelized cost of electricity of 40.0 $/MWh based on the number of day and night operation hours is identified. In exergoeconomic analysis, the costs of thermodynamic inefficiencies were identified and compared to the component cost rates. Different measures for component cost reduction and performance enhancement were identified and applied. Using iterative exergoeconomic optimization, the levelized cost of electricity is reduced to a weighted average of 39.2 $/MWh and a specific investment cost of 1088 $/kW. Finally, the proposed system is found to be competitive with existing integrated solar combined-cycle plants, while allowing a significantly higher solar share of 17% of the installed capacity.

Levelized Cost of Electricity and Plant Load Factor of 7.5 MW Grid Connected Biomass Power Plant

2018 ◽  
Vol 877 ◽  
pp. 360-365
Author(s):  
Rashmi Sharma ◽  
Bharat Kumar Saxena ◽  
K.V.S. Rao
Keyword(s):  
Power Plant ◽  
Interest Rates ◽  
Power Plants ◽  
Agricultural Waste ◽  
Load Factor ◽  
Levelized Cost Of Electricity ◽  
Cost Of Electricity ◽  
Levelized Cost ◽  
Average Plant ◽  
Biomass Power Plant

Large amount of agricultural waste is produced after harvesting of crops like wheat, paddy, soya-bean, maize, mustard, sugarcane, groundnut etc. The conventional way is to burn it in the fields or dump it across the wasteland. The burning of biomass residue in the fields has very adverse effect for the environment and leads to air pollution. A more efficient way is to use biomass residues of agricultural crops for production of electricity through biomass based power plants. In India, grid connected biomass power and co-generation installed capacity has increased from 1,102 MW in 2006 to 8,182 MW in 2017. This paper analyses the twenty years’ performance of a 7.5 MW biomass power plant situated at Rangpur village near Kota city of Rajasthan, India, based on capital cost, present cost of biomass per tonne, data obtained from 2006 to 2015 related to annual power generation, and annual consumption of biomass. Levelized Cost of Electricity is found to be varying from Rs. 4.43/kWh to Rs. 4.64/kWh for interest rates varying from 8% to 16%. Plant Load Factor is found to be varying from 29% to 82% during the period of 2006-07 to 2014-15 for nine years, with an average plant load factor of 73%.

The Thermoeconomic and Environomic Modeling and Optimization of the Synthesis, Design, and Operation of Combined Cycles With Advanced Options

2000 ◽  
Vol 123 (4) ◽  
pp. 717-726 ◽  
Author(s):  
S. Pelster ◽  
D. Favrat ◽  
M. R. von Spakovsky
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Combined Cycle ◽  
Traditional Methods ◽  
Combined Cycle Power Plant ◽  
Modeling And Optimization ◽  
Synthesis Design ◽  
Environmental Criteria ◽  
Generating Capacity ◽  
Combined Cycles

Combined cycle power plants are currently one of the most important options for the construction of new generating capacity as well as for the replacement and repowering of existing units. Due to the complexity and the large number of options and parameters available to such plants, finding optimized solutions for system synthesis, design, and operation is very difficult if not impossible with these traditional methods such as case and parametric tradeoff studies. This is especially true when advanced options as well as thermodynamic, economic, and environmental criteria are considered. A thermoeconomic environomic methodology to deal with these difficulties is presented here. Results for the application of this methodology to a 50 MW cogeneration combined cycle power plant are presented and discussed.

Failure Analysis of Low Pressure Evaporator Tubes in a Typical Combined Cycle Power Plant

2011 ◽  
Vol 110-116 ◽  
pp. 4607-4614
Author(s):  
M. Nematollahi ◽  
M. Rezaeian
Keyword(s):  
Power Plant ◽  
Steam Generator ◽  
Power Plants ◽  
Fluid Dynamic ◽  
Flow Distribution ◽  
Low Pressure ◽  
Combined Cycle ◽  
Two Phase ◽  
Combined Cycle Power Plant ◽  
Suitable Material

Flow-induced corrosion is one of the most prevalent tube damage mechanisms in steam generators of power plants. In this study, tube failure of a steam generator in Fars Combined Cycle Power Plant is evaluated. In addition to analysis of the measured tube thicknesses and the failure statistics data, computational fluid dynamic (CFD) methods are used to simulate flow distribution inside and outside of the tubes in one header of the low pressure circuit of the plant steam generator. The results show that regarding the created two-phase flow pattern inside the tubes, the droplet impingement erosion is the main source of tube failures in the bending areas where the extrados surface of the tubes are partially prone to the droplets. The results are useful for modifying the design of the steam generator from different viewpoints such as, optimal design for appropriate configuration of downcomer, header and footer and tube bending. Also, selecting suitable material for the steam generator tubes and implementation of protective coating in risky areas would benefit from the present results.

scholarly journals Design and Modeling of a Carbon Capturing Membrane for Integrated Gasification Combined Cycle Power Plant

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Hashmi SAM ◽  
Keyword(s):  
Carbon Dioxide ◽  
Power Plant ◽  
Carbon Dioxide Emissions ◽  
Power Plants ◽  
Research Paper ◽  
Combined Cycle ◽  
Integrated Gasification Combined Cycle ◽  
Combined Cycle Power Plant ◽  
Integrated Gasification ◽  
Igcc Power Plant

The main idea of this research paper is to provide an innovative way of capturing carbon dioxide emissions from a coal powered power plant. This research paper discusses the design and modeling of a carbon capturing membrane which is being used in an IGCC power plant to capture carbon dioxide from its exhaust gases. The modeling and design of the membrane is done using CFD software namely Ansys workbench. The design and modeling is done using two simulations, one describes the design and structure and the second one demonstrates the working mechanism of the membrane. This paper also briefly discusses IGCC which is environmentally benign compared to traditional pulverized coal-fired power plants, and economically feasible compared to the Natural Gas Combine Cycle (NGCC). IGCC power plant is more diverse and offers flexibility in fuel utility. This paper also incorporates a PFD of integrated gasification power plant with the carbon capturing membrane unit integrated in it. Index Terms: Integrated gasification combined cycle power plant, Carbon capture and storage, Gas permeating membrane, CFD based design of gas permeating membrane.

scholarly journals Evaluation of the Comparative Efficiency of CCGT in Variable Modes

2021 ◽  
Vol 2096 (1) ◽  
pp. 012123
Author(s):  
M V Garievskii
Keyword(s):  
Power Plant ◽  
Service Life ◽  
Gas Turbines ◽  
Power Plants ◽  
Combined Cycle ◽  
Cost Of Electricity ◽  
Comparative Efficiency ◽  
Main Equipment ◽  
Prime Cost ◽  
Efficient Power

Abstract The purpose of the research is to select the priorities for the development of various types of power plants and to substantiate the structure of generating capacities. An improved method has been developed for the selection of priorities for the development of various types of power plants, taking into account the service life and economic performance of the main equipment of power plants in variable modes based on equivalent operating hours. The influence of variable modes of combined-cycle gas installations on the service life of the main equipment (steam and gas turbines) is studied. The comparative efficiency of CCGT-450 in variable modes is calculated, taking into account the wear of the main equipment. As a result of calculations, it was found that with the minimum forecast prices for natural gas, the most efficient power plant (among those considered) is combined cycle power plant, which provides the lowest prime cost of electricity when operating in the base mode and the least increase in the prime cost of electricity when operating in an alternating mode.

scholarly journals Spatial-Economic Potential Analysis of Wind Power Plants in Germany

Wind ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 77-89
Author(s):  
David Hennecke ◽  
Carsten Croonenbroeck
Keyword(s):  
Power Plant ◽  
Wind Power ◽  
Electricity Market ◽  
Regional Planning ◽  
Power Plants ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Levelized Cost Of Electricity ◽  
Potential Analysis ◽  
Federal States

Before a new wind farm can be built, politics and regional planning must approve of the respective area as a suitable site. For this purpose, large-scale potential computations were carried out to identify suitable areas. The calculation of wind power plant potential usually focuses on capturing the highest energy potential. In Germany, due to an energy production reimbursement factor defined in the Renewable Energy Sources Act (“Erneuerbare-Energien-Gesetz”, EEG) in 2017, the influence of energy quantities on the power plant potential varies, economically and spatially. Therefore, in addition to the calculation of energy potentials, it was also necessary to perform a potential analysis in terms of economic efficiency. This allows, on the one hand, an economic review of the areas tendered by the regional planning and, on the other hand, a spatial-economic analysis that expands the parameters in the search for new areas. In this work, (a) potentials with regard to the levelized cost of electricity (LCOE) were calculated by the example of the electricity market in Germany, which were then (b) spatially and statistically processed on the level of the federal states.

Influence of Degradation, Fuel Cost and Electricity Price Factors on Combine Cycle Power Plant Cost Analysis

2021 ◽  
Author(s):  
Pugalenthi Nanadagopal ◽  
Matthias Duerr ◽  
Ole Fahrendorf ◽  
Dan Haid ◽  
Hubert Paprotna
Keyword(s):  
Economic Evaluation ◽  
Power Plant ◽  
Cost Analysis ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Manufacturing Companies ◽  
Fuel Cost ◽  
Levelized Cost Of Electricity ◽  
Cost Of Electricity ◽  
Combine Cycle

Abstract Gas turbine-based combine cycle (GT-CC) economic evaluation is very important to bring together own equipment manufacturing companies (OEM’s) and power plant owners. The fuel cost & cost of electricity play the major role in economic evaluation which drives the decision during the bidding. The first portion of this paper encompasses the different cost analysis methods like Net Present Value (NPV), Internal Rate of Return (IRR), Levelized Cost of Electricity (LCOE) and Pay Back Period (PBP) for different fuel costs and electricity prices. The second portion of the paper covers the delta cost benefits due to improvement in the combined cycle degradation GT-CC operators or customers are looking for the opportunities to control and minimize the degradation of the gas turbine power plant which directly impact the profitability. The customer or operator always monitor the plant performance to understand the life cost impact on performance degradation. This paper will help the customers & GT-CC OEM companies to focus on different area to reduce the unit cost of generating electricity, decide to move forward with the project during the proposal and improve the business at various regions based on fuel cost and global geographical political situations. Also, the reader can digest the benefits of improved degradation curve over the normal curve.

scholarly journals Health-safety and environmental risk assessment of power plants using multi criteria decision making method

2011 ◽  
Vol 17 (4) ◽  
pp. 437-449 ◽  
Author(s):  
Ali Jozi ◽  
Alsadat Pouriyeh
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Power Plants ◽  
Underground Water ◽  
Combined Cycle ◽  
Water Levels ◽  
Combined Cycle Power Plant ◽  
Health Safety ◽  
Expert Choice ◽  
Hierarchy Process

Growing importance of environmental issues at global and regional levels including pollution of water, air etc. as well as the outcomes such as global warming and climate change has led to being considered environmental aspects as effective factors for power generation. Study ahead, aims at examination of risks resulting from activities of Yazd Combined Cycle Power Plant located in Iran. Method applied in the research is analytical hierarchy process. After identification of factors causing risk, the analytical hierarchy structure of the power plant risks were designed and weight of the criteria and sub-criteria were calculated by intensity probability product using Eigenvector Method and EXPERT CHOICE Software as well. Results indicate that in technological, health-safety, biophysical and socio economic sections of the power plant, factors influenced by the power plant activities like fire and explosion, hearing loss, quantity of groundwater, power generation are among the most important factors causing risk in the power plant. The drop in underground water levels is the most important natural consequence influenced on Yazd Combined Cycle Power Plant.

Sign in / Sign up

Export Citation Format

Share Document