scholarly journals Material Damping Analysis of Triangular Cantilever Beam for Electromagnetic Vibration Energy Harvesting Applications

2021 ◽  
Vol 10 (1) ◽  
pp. 1
Author(s):  
Chung Ket Thein ◽  
Faruq Muhammad Foong
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Vibration Energy ◽  
Material Damping ◽  
Vibration Energy Harvesting ◽  
Element Analysis ◽  
Vibration Energy Harvester ◽  
Electromagnetic Vibration ◽  
Rectangular Beam ◽  
Higher Power

Triangular cantilever beams are often desired in piezoelectric vibration energy harvesting applications, as they result in a better performance due to the higher and more uniform stress they exhibit. However, the application of this cantilever geometry has not yet been explored for other transduction methods. In this study, the application of a triangular cantilever beam for a cantilevered electromagnetic vibration energy harvester was examined by analyzing its material damping and comparing it to a regular rectangular beam. The material damping of the harvester was predicted through finite element analysis using the critically damped stress method. Under the same beam volume or beam length, the triangular cantilever beam exhibited an approximately 7.1% lower material damping when compared to a rectangular cantilever beam. Further analysis shows that the triangular beam can also deliver a 21.7% higher power output than the rectangular beam.

scholarly journals Experiment Investigation of Bistable Vibration Energy Harvesting with Random Wave Environment

2021 ◽  
Vol 11 (9) ◽  
pp. 3868
Author(s):  
Qiong Wu ◽  
Hairui Zhang ◽  
Jie Lian ◽  
Wei Zhao ◽  
Shijie Zhou ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Harvesting ◽  
Cantilever Beam ◽  
Large Scale ◽  
Low Frequency ◽  
Vibration Energy ◽  
Random Wave ◽  
Periodic Signal ◽  
Vibration Energy Harvesting ◽  
Motion Activity

The energy harvested from the renewable energy has been attracting a great potential as a source of electricity for many years; however, several challenges still exist limiting output performance, such as the package and low frequency of the wave. Here, this paper proposed a bistable vibration system for harvesting low-frequency renewable energy, the bistable vibration model consisting of an inverted cantilever beam with a mass block at the tip in a random wave environment and also develop a vibration energy harvesting system with a piezoelectric element attached to the surface of a cantilever beam. The experiment was carried out by simulating the random wave environment using the experimental equipment. The experiment result showed a mass block’s response vibration was indeed changed from a single stable vibration to a bistable oscillation when a random wave signal and a periodic signal were co-excited. It was shown that stochastic resonance phenomena can be activated reliably using the proposed bistable motion system, and, correspondingly, large-scale bistable responses can be generated to realize effective amplitude enlargement after input signals are received. Furthermore, as an important design factor, the influence of periodic excitation signals on the large-scale bistable motion activity was carefully discussed, and a solid foundation was laid for further practical energy harvesting applications.

scholarly journals A Theory for Energy-Optimized Operation of Self-Adaptive Vibration Energy Harvesting Systems with Passive Frequency Adjustment

Micromachines ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 44 ◽  
Author(s):  
Mario Mösch ◽  
Gerhard Fischerauer
Keyword(s):  
Energy Harvesting ◽  
Resonance Frequency ◽  
Optimal Operation ◽  
Energy Output ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Frequency Adjustment ◽  
Harvesting Systems ◽  
Self Adaptive

Self-adaptive vibration energy harvesting systems vary their resonance frequency automatically to better exploit changing environmental conditions. The energy required for the adjustment is taken from the energy storage of the harvester module. The energy gained by an adjustment step has to exceed the energy expended on it to justify the adjustment. A smart self-adaptive system takes this into account and operates in a manner that maximizes the energy output. This paper presents a theory for the optimal operation of a vibration energy harvester with a passive resonance-frequency adjustment mechanism (one that only requires energy for the adjustment steps proper, but not during the hold phases between the steps). Several vibration scenarios are considered to derive a general guideline. It is shown that there exist conditions under which a narrowing of the adjustment bandwidth improves the system characteristics. The theory is applied to a self-adaptive energy harvesting system based on electromagnetic transduction with narrowband resonators. It is demonstrated that the novel optimum mode of operation increases the energy output by a factor of 3.6.

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilever in Piezoelectric Vibration Energy Harvester

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Shan Gao ◽  
Hongrui Ao ◽  
Hongyuan Jiang
Keyword(s):  
Energy Harvesting ◽  
Integrated Circuits ◽  
Resonant Frequency ◽  
Power Density ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Cantilevered Beam ◽  
Piezoelectric Vibration

Abstract Piezoelectric vibration energy harvesting technology has attracted significant attention for its applications in integrated circuits, microelectronic devices, and wireless sensors due to high power density, easy integration, simple configuration, and other outstanding features. Among piezoelectric vibration energy harvesting structures, the cantilevered beam is one of the simplest and most commonly used structures. In this work, a vertically staggered rectangle-through-holes (VS-RTH) cantilevered model is proposed, which focuses on the multi-directional vibration collection. To verify the output performance of the device, this paper employs basic materials and fabrication methods with mathematical modeling. The simulations are conducted through finite element methods to discuss the properties of VS-RTH energy harvester on resonant frequency and output characteristics. Besides, an energy storage circuit is adopted as a collection system. It can achieve a maximum voltage of 4.5 V which is responded to the harmonic vibrating input of 1 N force and 1 m/s2 in a single vibrating direction. Moreover, the power density is 2.596 W/cm3 with a 100 kΩ resistor. It is almost four times better than the output of unidirectional cantilever beam with similar resonant frequency and volume. According to the more functionality in the applications, VS-RTH energy harvester can be used in general vibration acquisition of machines and vehicles. Except for electricity storage, the harvester can potentially employ as a sensor to monitor the diversified physical signals for smooth operation and emergence reports. Looking forward, the VS-RTH harvester renders an effective approach toward decomposing the vibration directions in the environment for further complicating vibration applications.

scholarly journals Power Supply Switch Circuit for Intermittent Energy Harvesting

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1446 ◽  
Author(s):  
Hyun Jun Jung ◽  
Saman Nezami ◽  
Soobum Lee
Keyword(s):  
Energy Harvesting ◽  
Power Management ◽  
Power Supply ◽  
High Efficiency ◽  
Operation Mode ◽  
Vibration Energy ◽  
Storage Device ◽  
Sleep Mode ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester

Energy harvesters generate power only when ambient energy is available, and power loss is significant when the harvester does not produce energy and its power management circuit is still turned on. This paper proposes a new high-efficiency power management circuit for intermittent vibration energy harvesting. The proposed circuit is unique in terms of autonomous power supply switch between harvester and storage device (battery), as well as self-start and control of the operation mode (between active and sleep modes). The self-start controller saves power during an inactive period and the impedance matching concept enables maximum power transfer to the storage device. The proposed circuit is prototyped and tested with an intermittent vibration energy harvester. Test results found that the daily energy consumption of the proposed circuit is smaller than that of the resistive matching circuit: 0.75 J less in sleep mode and 0.04 J less in active mode with self-start.

Sign in / Sign up

Export Citation Format

Share Document