scholarly journals Temperature Difference Sensor to Monitor the Temperature Difference in Processor Active Heat Sink Based on Thermopile

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1410
Author(s):  
Piotr Marek Markowski ◽  
Mirosław Gierczak ◽  
Andrzej Dziedzic
Keyword(s):  
Thick Film ◽  
Temperature Difference ◽  
Heat Sink ◽  
Thermal State ◽  
Thermal Contact ◽  
Ceramic Technology ◽  
Processing Unit ◽  
Central Processing ◽  
Good Thermal Contact ◽  
Specific Shape

The monitoring of processor temperature is crucial to increase its efficiency. One of the novel approaches is use the information not only about the CPU (Central Processing Unit) thermal state, but also about changing environmental conditions. The additional temperature difference sensor to monitor thermal changes in the processor environment is necessary. The sensor dedicated for active heat sink, often used inside laptops, was designed, fabricated and investigated. To fulfill the requirements and to match to the specific shape of the active heat sink, the hybrid sensor was proposed. It was composed of six thermocouples and fabricated using thick-film and LTCC (Low Temperature Cofired Ceramic) technology combined with wire thermocouples. Thick-film/LTCC flat substrates with thermoelectric paths ensured good thermal contact between the sensor and the monitored surface. The thermoelectric wires allowed adjusting the sensor to the complicated shape of the active heatsink. Three different versions of the sensor were realized and compared. All of them seem to be suitable for measuring the temperature difference in the given application and they can be used in further works.

Perangkat keras komputer

2020 ◽  
Author(s):  
Roudati jannah
Keyword(s):  
Data Storage ◽  
Central Processing Unit ◽  
External Memory ◽  
Storage Device ◽  
Input Device ◽  
Processing Unit ◽  
Central Processing ◽  
Output Device

Perangkat keras komputer adalah bagian dari sistem komputer sebagai perangkat yang dapat diraba, dilihat secara fisik, dan bertindak untuk menjalankan instruksi dari perangkat lunak (software). Perangkat keras komputer juga disebut dengan hardware. Hardware berperan secara menyeluruh terhadap kinerja suatu sistem komputer. Prinsipnya sistem komputer selalu memiliki perangkat keras masukan (input/input device system) – perangkat keras premprosesan (processing/central processing unit) – perangkat keras luaran (output/output device system) – perangkat tambahan yang sifatnya opsional (peripheral) dan tempat penyimpanan data (storage device system/external memory).

CENTRAL PROCESSING UNIT (CPU)

2020 ◽  
Author(s):  
Ika Milia wahyunu Siregar
Keyword(s):  
Processing System ◽  
Central Processing Unit ◽  
Processing Unit ◽  
Central Processing

Perkembangan IT di dunia sangat pesat, mulai dari perkembangan sofware hingga hardware. Teknologi sekarang telah mendominasi sebagian besar di permukaan bumi ini. Karena semakin cepatnya perkembangan Teknologi, kita sebagai pengguna bisa ketinggalan informasi mengenai teknologi baru apabila kita tidak up to date dalam pengetahuan teknologi ini. Hal itu dapat membuat kita mudah tergiur dan tertipu dengan berbagai iklan teknologi tanpa memikirkan sisi negatifnya. Sebagai pengguna dari komputer, kita sebaiknya tahu seputar mengenai komponen-komponen komputer. Komputer adalah serangkaian mesin elektronik yang terdiri dari jutaan komponen yang dapat saling bekerja sama, serta membentuk sebuah sistem kerja yang rapi dan teliti. Sistem ini kemudian digunakan untuk dapat melaksanakan pekerjaan secara otomatis, berdasarkan instruksi (program) yang diberikan kepadanya. Istilah Hardware komputer atau perangkat keras komputer, merupakan benda yang secara fisik dapat dipegang, dipindahkan dan dilihat. Central Processing System/ Central Processing Unit (CPU) adalah salah satu jenis perangkat keras yang berfungsi sebagai tempat untuk pengolahan data atau juga dapat dikatakan sebagai otak dari segala aktivitas pengolahan seperti penghitungan, pengurutan, pencarian, penulisan, pembacaan dan sebagainya.

Perangkat lunak komputer

2020 ◽  
Author(s):  
Intan khadijah simatupang
Keyword(s):  
Data Storage ◽  
Central Processing Unit ◽  
External Memory ◽  
Storage Device ◽  
Input Device ◽  
Processing Unit ◽  
Central Processing ◽  
Output Device

Komputer adalah serangkaian mesin elektronik yang terdiri dari jutaan komponen yang dapat saling bekerja sama, serta membentuk sebuah sistem kerja yang rapi dan teliti. Sistem ini kemudian digunakan untuk dapat melaksanakan pekerjaan secara otomatis, berdasarkan instruksi (program) yang diberikan kepadanya. Istilah Hardware computer atau perangkat keras komputer, merupakan benda yang secara fisik dapat dipegang, dipindahkan dan dilihat. Software komputer atau perangkat lunak komputer merupakan kumpulan instruksi (program/prosedur) untuk dapat melaksanakan pekerjaan secara otomatis dengan cara mengolah atau memproses kumpulan instruksi (data) yang diberikan. Pada prinsipnya sistem komputer selalu memiliki perangkat keras masukan (input/input device system) – perangkat keras pemprosesan (processing/ central processing unit) – perangkat keras keluaran (output/output device system), perangkat tambahan yang sifatnya opsional (peripheral) dan tempat penyimpanan data (Storage device system/external memory).

PERANGKAT KERAS ( HARDWARE ) PADA KOMPUTER

2020 ◽  
Author(s):  
Siti Kumala Dewi
Keyword(s):  
Processing System ◽  
Central Processing Unit ◽  
Input Device ◽  
Processing Unit ◽  
Central Processing ◽  
Output Device ◽  
System P ◽  
System 2

Perangkat keras komputer adalah bagian dari sistem komputer sebagai perangkat yang dapat diraba, dilihat secara fisik, dan bertindak untuk menjalankan instruksi dari perangkat lunak (software). Perangkat keras komputer juga disebut dengan hardware. Hardware berperan secara menyeluruh terhadap kinerja suatu sistem komputer. Berdasarkan fungsinya, perangkat keras terbagi menjadi :1.Sistem Perangkat Keras Masukan (Input Device System )2.Sistem Pemrosesan ( Central Processing System/ Central Processing Unit(CPU)3.Sistem Perangkat Keras Keluaran ( Output Device System )4.Sistem Perangkat Keras Tambahan (Peripheral/Accessories Device System)

scholarly journals Numerical simulation of flattened heat pipe with double heat sources for CPU and GPU cooling application in laptop computers

2020 ◽  
Author(s):  
Wisoot Sanhan ◽  
Kambiz Vafai ◽  
Niti Kammuang-Lue ◽  
Pradit Terdtoon ◽  
Phrut Sakulchangsatjatai
Keyword(s):  
Experimental Data ◽  
Heat Pipe ◽  
Graphics Processing Unit ◽  
Processing Unit ◽  
Heat Sources ◽  
Final Thickness ◽  
Laptop Computers ◽  
Central Processing ◽  
Graphics Processing ◽  
Good Agreement

Abstract An investigation of the effect of the thermal performance of the flattened heat pipe on its double heat sources acting as central processing unit and graphics processing unit in laptop computers is presented in this work. A finite element method is used for predicting the flattening effect of the heat pipe. The cylindrical heat pipe with a diameter of 6 mm and the total length of 200 mm is flattened into three final thicknesses of 2, 3, and 4 mm. The heat pipe is placed under a horizontal configuration and heated with heater 1 and heater 2, 40 W in combination. The numerical model shows good agreement compared with the experimental data with the standard deviation of 1.85%. The results also show that flattening the cylindrical heat pipe to 66.7 and 41.7% of its original diameter could reduce its normalized thermal resistance by 5.2%. The optimized final thickness or the best design final thickness for the heat pipe is found to be 2.5 mm.

ILIS--An integrated laboratory information system. I. Biochemistry and hematology.

1982 ◽  
Vol 28 (2) ◽  
pp. 271-276 ◽  
Author(s):  
S U Deshpande
Keyword(s):  
Medical Records ◽  
Data Entry ◽  
Large Data ◽  
Work Load ◽  
Processing Unit ◽  
Patient Identification ◽  
Central Processing ◽  
Cathode Ray Tubes ◽  
Clinical Laboratories ◽  
On Line

Abstract IBM System 34 (central processing unit, 128 kilobytes; fixed disks, 128.4 megabytes) with seven cathode-ray tubes has been used by our clinical laboratories for the last 30 months. All data-entry programs are in a conversational mode, for on-line corrections of possible errors in patient identification and results. Daily reports are removed from the medical records after temporary and permanent cumulative weekly reports are received, which keep a three-month track of the results. The main advantages of the system are: (a) the increasing laboratory work load can be handled with the same staff; (b) the volume of the medical record files on the patients is decreased; (c) an easily retrievable large data base of results is formed for research purposes; (d) faster billing; and (e) the computer system is run without engaging any additional staff.

scholarly journals A Parallel-Computing Approach for Vector Road-Network Matching Using GPU Architecture

2018 ◽  
Vol 7 (12) ◽  
pp. 472 ◽  
Author(s):  
Bo Wan ◽  
Lin Yang ◽  
Shunping Zhou ◽  
Run Wang ◽  
Dezhi Wang ◽  
...  
Keyword(s):  
Road Network ◽  
Large Scale ◽  
Graphics Processing Unit ◽  
Road Networks ◽  
Processing Unit ◽  
Data Partition ◽  
Matching Method ◽  
The Road ◽  
Central Processing ◽  
Relaxation Matching

The road-network matching method is an effective tool for map integration, fusion, and update. Due to the complexity of road networks in the real world, matching methods often contain a series of complicated processes to identify homonymous roads and deal with their intricate relationship. However, traditional road-network matching algorithms, which are mainly central processing unit (CPU)-based approaches, may have performance bottleneck problems when facing big data. We developed a particle-swarm optimization (PSO)-based parallel road-network matching method on graphics-processing unit (GPU). Based on the characteristics of the two main stages (similarity computation and matching-relationship identification), data-partition and task-partition strategies were utilized, respectively, to fully use GPU threads. Experiments were conducted on datasets with 14 different scales. Results indicate that the parallel PSO-based matching algorithm (PSOM) could correctly identify most matching relationships with an average accuracy of 84.44%, which was at the same level as the accuracy of a benchmark—the probability-relaxation-matching (PRM) method. The PSOM approach significantly reduced the road-network matching time in dealing with large amounts of data in comparison with the PRM method. This paper provides a common parallel algorithm framework for road-network matching algorithms and contributes to integration and update of large-scale road-networks.

Sign in / Sign up

Export Citation Format

Share Document