scholarly journals A Variation-Aware Design Methodology for Distributed Arithmetic

Electronics ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 108
Author(s):  
Yue Lu ◽  
Shengyu Duan ◽  
Basel Halak ◽  
Tom Kazmierski

Distributed arithmetic (DA) brings area and power benefits to digital designs relevant to the Internet-of-Things. Therefore, new error resilient techniques for DA computation are urgently required to improve robustness against the process, voltage, and temperature (PVT) variations. This paper proposes a new in-situ timing error prevention technique to mitigate the impact of variations in DA circuits by providing a guardband for significant (most significant bit) computations. This guardband is initially achieved by modifying the sign extension block and carefully gate-sizing. Therefore, least significant bit (LSB) computation can correspond to the critical path, and timing error can be tolerated at the cost of acceptable accuracy loss. Our approach is demonstrated on a 16-tap finite impulse respons (FIR) filter using the 65 nm CMOS process and the simulation results show that this design can still maintain high-accuracy performance without worst case timing margin, and achieve up to 32 % power savings by voltage scaling when the worst case margin is considered with only 9 % area overhead.

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
S. S. Askar

It is reported in the literature that the most fundamental idea to address uncertainty is to begin by condensing random variables. In this paper, we propose Cournot duopoly game where quantity-setting firms use nonlinear demand function that has no inflection points. A random cost function is introduced in this model. Each firm in the model wants to maximize its expected profit and also wants to minimize its uncertainty by minimizing the cost. To handle this multiobjective optimization problem, the expectation and worst-case approaches are used. A model of two rational firms that are in competition and produce homogenous commodities is introduced using an unknown demand function. The equilibrium points of this model are obtained and their dynamical characteristics such as stability, bifurcation, and chaos are investigated. Complete stability and bifurcation analysis are provided. The obtained theoretical results are verified by numerical simulation.


2011 ◽  
Vol 189-193 ◽  
pp. 1532-1537
Author(s):  
Wei Lo ◽  
Yih Tzoo Chen

Many techniques have been developed to analyze the time impact and the costs caused by the disruptions of the project works. However, most were limited on the delay of the critical path and the overall project completion date. In recent years, although more attention has been drawn on the impact of the float loss on the overall project cost, not a single research result has been widely accepted and recognized. This study aims to fill this gap. This research firstly introduces a resource-integrated genetic algorithms (G.A.) model, which will be used to develop an optimal schedule including the timing and quantity for each type of resource required to complete each individual activity. Secondly, by using a case study this research intends to identify the impact of float loss on overall project cost through comparing the as-planned optimal schedule with an after-impacted schedule. Based on the research results this research has identified that the relationship between the float loss and project cost can be expressed as a step function and the time span of total float can be divided into and cost-related float and cost-unrelated float, termed as optimal float, in which the consumption of float will not cause the delay of the project completion date, nor the increase of project cost. The findings refute the traditional concept that the total float belongs to neither the owner nor the contractor, and suggest that the utilization float is free only within the optimal float and the float apportionment will never be reasonable unless the cost of float floss has been taken into consideration.


2014 ◽  
Vol 84 (5-6) ◽  
pp. 244-251 ◽  
Author(s):  
Robert J. Karp ◽  
Gary Wong ◽  
Marguerite Orsi

Abstract. Introduction: Foods dense in micronutrients are generally more expensive than those with higher energy content. These cost-differentials may put low-income families at risk of diminished micronutrient intake. Objectives: We sought to determine differences in the cost for iron, folate, and choline in foods available for purchase in a low-income community when assessed for energy content and serving size. Methods: Sixty-nine foods listed in the menu plans provided by the United States Department of Agriculture (USDA) for low-income families were considered, in 10 domains. The cost and micronutrient content for-energy and per-serving of these foods were determined for the three micronutrients. Exact Kruskal-Wallis tests were used for comparisons of energy costs; Spearman rho tests for comparisons of micronutrient content. Ninety families were interviewed in a pediatric clinic to assess the impact of food cost on food selection. Results: Significant differences between domains were shown for energy density with both cost-for-energy (p < 0.001) and cost-per-serving (p < 0.05) comparisons. All three micronutrient contents were significantly correlated with cost-for-energy (p < 0.01). Both iron and choline contents were significantly correlated with cost-per-serving (p < 0.05). Of the 90 families, 38 (42 %) worried about food costs; 40 (44 %) had chosen foods of high caloric density in response to that fear, and 29 of 40 families experiencing both worry and making such food selection. Conclusion: Adjustments to USDA meal plans using cost-for-energy analysis showed differentials for both energy and micronutrients. These differentials were reduced using cost-per-serving analysis, but were not eliminated. A substantial proportion of low-income families are vulnerable to micronutrient deficiencies.


2014 ◽  
Vol 1 (2) ◽  
pp. 187
Author(s):  
Serdar KUZU

The size of international trade continues to extend rapidly from day to day as a result of the globalization process. This situation causes an increase in the economic activities of businesses in the trading area. One of the main objectives of the cost system applied in businesses is to be able to monitor the competitors and the changes that can be occured as a result of the developments in the sector. Thus, making cost accounting that is proper according to IAS / IFRS and tax legislation has become one of the strategic targets of the companies in most countries. In this respect, businesses should form their cost and pricing systems according to new regulations. Transfer pricing practice is usefull in setting the most proper price for goods that are subject to the transaction, in evaluating the performance of the responsibility centers of business, and in determining if the inter-departmental pricing system is consistent with targets of the business. The taxing powers of different countries and also the taxing powers of different institutions in a country did not overlap. Because of this reason, bringing new regulations to the tax system has become essential. The transfer pricing practice that has been incorporated into the Turkish Tax System is one of the these regulations. The transfer pricing practice which includes national and international transactions has been included in the Corporate Tax Law and Income Tax Law. The aim of this study is to analyse the impact of goods and services transfer that will occur between departments of businesses on the responsibility center and business performance, and also the impact of transfer pricing practice on the business performance on the basis of tax-related matters. As a result of the study, it can be said that transfer pricing practice has an impact on business performance in terms of both price and tax-related matters.


2015 ◽  
Vol 6 (1) ◽  
pp. 50-57
Author(s):  
Rizqa Raaiqa Bintana ◽  
Putri Aisyiyah Rakhma Devi ◽  
Umi Laili Yuhana

The quality of the software can be measured by its return on investment. Factors which may affect the return on investment (ROI) is the tangible factors (such as the cost) dan intangible factors (such as the impact of software to the users or stakeholder). The factor of the software itself are assessed through reviewing, testing, process audit, and performance of software. This paper discusses the consideration of return on investment (ROI) assessment criteria derived from the software and its users. These criteria indicate that the approach may support a rational consideration of all relevant criteria when evaluating software, and shows examples of actual return on investment models. Conducted an analysis of the assessment criteria that affect the return on investment if these criteria have a disproportionate effort that resulted in a return on investment of a software decreased. Index Terms - Assessment criteria, Quality assurance, Return on Investment, Software product


2010 ◽  
Vol 4 (3) ◽  
pp. 32-36 ◽  
Author(s):  
Deborah Schofield ◽  
Rupendra Shrestha ◽  
Emily Callander ◽  
Richard Pervical ◽  
Simon Kelly ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document