scholarly journals Multifractal Characteristics and Classification of Tight Sandstone Reservoirs: A Case Study from the Triassic Yanchang Formation, Ordos Basin, China

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2242 ◽  
Author(s):  
Zhihao Jiang ◽  
Zhiqiang Mao ◽  
Yujiang Shi ◽  
Daxing Wang
Keyword(s):  
Pore Structure ◽  
Ordos Basin ◽  
Type I ◽  
Tight Sandstone ◽  
Throat Radius ◽  
Yanchang Formation ◽  
Porosity And Permeability ◽  
Sandstone Reservoir ◽  
And Migration ◽  
Mercury Injection Capillary Pressure

Pore structure determines the ability of fluid storage and migration in rocks, expressed as porosity and permeability in the macroscopic aspects, and the pore throat radius in the microcosmic aspects. However, complex pore structure and strong heterogeneity make the accurate description of the tight sandstone reservoir of the Triassic Yanchang Formation, Ordos Basin, China still a problem. In this paper, mercury injection capillary pressure (MICP) parameters were applied to characterize the heterogeneity of pore structure, and three types of pore structure were divided, from high to low quality and defined as Type I, Type II and Type III, separately. Then, the multifractal analysis based on the MICP data was conducted to investigate the heterogeneity of the tight sandstone reservoir. The relationships among physical properties, MICP parameters and a series of multifractal parameters have been detailed analyzed. The results showed that four multifractal parameters, singularity exponent parameter (αmin), generalized dimension parameter (Dmax), information dimension (D1), and correlation dimension (D2) were in good correlations with the porosity and permeability, which can well characterize the pore structure and reservoir heterogeneity of the study area, while the others didn’t respond well. Meanwhile, there also were good relationships between these multifractal and MICP parameters.

scholarly journals Microscale Pore Throat Differentiation and Its Influence on the Distribution of Movable Fluid in Tight Sandstone Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Fengjuan Dong ◽  
Xuefei Lu ◽  
Yuan Cao ◽  
Xinjiu Rao ◽  
Zeyong Sun
Keyword(s):  
Ordos Basin ◽  
Pore Throat ◽  
Tight Sandstone ◽  
Throat Radius ◽  
Thin Sections ◽  
Small Pore ◽  
Sandstone Reservoir ◽  
Sandstone Reservoirs ◽  
Classification Evaluation ◽  
Better Than

Tight sandstone reservoirs have small pore throat sizes and complex pore structures. Taking the Chang 6 tight sandstone reservoir in the Huaqing area of the Ordos Basin as an example, based on casting thin sections, nuclear magnetic resonance experiments, and modal analysis of pore size distribution characteristics, the Chang 6 tight sandstone reservoir in the study area can be divided into two types: wide bimodal mode reservoirs and asymmetric bimodal mode reservoirs. Based on the information entropy theory, the concept of “the entropy of microscale pore throats” is proposed to characterize the microscale pore throat differentiation of different reservoirs, and its influence on the distribution of movable fluid is discussed. There were significant differences in the entropy of the pore throat radius at different scales, which were mainly shown as follows: the entropy of the pore throat radius of 0.01~0.1 μm, >0.1 μm, and <0.01 μm decreased successively; that is, the complexity of the pore throat structure decreased successively. The correlation between the number of movable fluid occurrences on different scales of pore throats and the entropy of microscale pore throats in different reservoirs is also different, which is mainly shown as follows: in the intervals of >0.1 μm and 0.01~0.1 μm, the positive correlation between the occurrence quantity of movable fluid in the wide bimodal mode reservoir is better than that in the asymmetric bimodal mode reservoir. However, there was a negative correlation between the entropy of the pore throat radius and the number of fluid occurrences in the two types of reservoirs in the pore throat radius of <0.01 μm. Therefore, pore throats of >0.1 μm and 0.01~0.1 μm play a controlling role in studying the complexity of the microscopic pore throat structure and the distribution of movable fluid in the Chang 6 tight sandstone reservoir. The above results deepen the understanding of the pore throat structure of tight sandstone reservoirs and present guiding significance for classification evaluation, quantitative characterization, and efficient development of tight sandstone reservoirs.

scholarly journals Fractal Characterization of Nanopore Structure in Shale, Tight Sandstone and Mudstone from the Ordos Basin of China Using Nitrogen Adsorption

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 583 ◽  
Author(s):  
Xiaohong Li ◽  
Zhiyong Gao ◽  
Siyi Fang ◽  
Chao Ren ◽  
Kun Yang ◽  
...  
Keyword(s):  
Pore Structure ◽  
Pressure Range ◽  
Ordos Basin ◽  
Fractal Dimensions ◽  
Nitrogen Adsorption ◽  
Relative Pressure ◽  
Tight Sandstone ◽  
Porosity And Permeability ◽  
The Ordos Basin ◽  
Nanopore Structure

The characteristics of the nanopore structure in shale, tight sandstone and mudstone from the Ordos Basin of China were investigated by X-ray diffraction (XRD) analysis, porosity and permeability tests and low-pressure nitrogen adsorption experiments. Fractal dimensions D1 and D2 were determined from the low relative pressure range (0 < P/P0 < 0.4) and the high relative pressure range (0.4 < P/P0 < 1) of nitrogen adsorption data, respectively, using the Frenkel–Halsey–Hill (FHH) model. Relationships between pore structure parameters, mineral compositions and fractal dimensions were investigated. According to the International Union of Pure and Applied Chemistry (IUPAC) isotherm classification standard, the morphologies of the nitrogen adsorption curves of these 14 samples belong to the H2 and H3 types. Relationships among average pore diameter, Brunner-Emmet-Teller (BET) specific surface area, pore volume, porosity and permeability have been discussed. The heterogeneities of shale nanopore structures were verified, and nanopore size mainly concentrates under 30 nm. The average fractal dimension D1 of all the samples is 2.1187, varying from 1.1755 to 2.6122, and the average fractal dimension D2 is 2.4645, with the range from 2.2144 to 2.7362. Compared with D1, D2 has stronger relationships with pore structure parameters, and can be used for analyzing pore structure characteristics.

scholarly journals Diagenesis and its influence on reservoir quality and oil-water relative permeability: A case study in the Yanchang Formation Chang 8 tight sandstone oil reservoir, Ordos Basin, China

2019 ◽  
Vol 11 (1) ◽  
pp. 37-47 ◽  
Author(s):  
Meng Wang ◽  
Zhaomeng Yang ◽  
Changjun Shui ◽  
Zhong Yu ◽  
Zhufeng Wang ◽  
...  
Keyword(s):  
Pore Structure ◽  
Relative Permeability ◽  
Oil Recovery ◽  
Ordos Basin ◽  
Reservoir Quality ◽  
Tight Oil ◽  
Property A ◽  
Tight Sandstone ◽  
Yanchang Formation ◽  
Small Pore

Abstract Different from conventional reservoirs, unconventional tight sand oil reservoirs are characterized by low or ultra-low porosity and permeability, small pore-throat size, complex pore structure and strong heterogeneity. For the continuous exploration and enhancement of oil recovery from tight oil, further analysis of the origins of the different reservoir qualities is required. The Upper Triassic Chang 8 sandstone of the Yanchang Formation from the Maling Oilfield is one of the major tight oil bearing reservoirs in the Ordos Basin. Practical exploration demonstrates that this formation is a typical tight sandstone reservoir. Samples taken from the oil layer were divided into 6 diagenetic facies based on porosity, permeability and the diagenesis characteristics identified through thin section and scanning electron microscopy. To compare pore structure and their seepage property, a high pressure mercury intrusion experiments (HPMI), nuclear magnetic resonance (NMR), andwater-oil relative permeability test were performed on the three main facies developed in reservoir. The reservoir quality and seepage property are largely controlled by diagenesis. Intense compaction leads to a dominant loss of porosity in all sandstones, while different degrees of intensity of carbonate cementation and dissolution promote the differentiation of reservoir quality. The complex pore structure formed after diagenesis determines the seepage characteristics, while cementation of chlorite and illite reduce the effective pore radius, limit fluid mobility, and lead to a serious reduction of reservoir permeability.

scholarly journals Influence of different pore structure types on the occurrence features of movable fluid in Chang-10 reservoir in Wuqi–Ansai Oilfield

2021 ◽  
Vol 11 (4) ◽  
pp. 1609-1620
Author(s):  
Yong-li Gao ◽  
Pan Li ◽  
Teng Li
Keyword(s):  
Pore Structure ◽  
Water Movement ◽  
Ordos Basin ◽  
Pressure Curve ◽  
Type I ◽  
Type Ii ◽  
Pore Throat ◽  
Throat Radius ◽  
Type Iii ◽  
Mercury Injection

AbstractChang-10 reservoir in Wuqi–Ansai oilfield of Ordos Basin is restricted by its strong microscopic heterogeneity, complicated microscopic pore structure and unclear oil–water movement rules. The technology of nuclear magnetic resonance (NMR) is an excellent method to quantitatively evaluate the reservoir fluid of different pore structure types, and the microscopic experiments such as cast thin slices, scanning electron microscope (SEM) and high-pressure mercury injection were also used to analyze the differences in the occurrence features of fluid of different pore structure types and their influencing factors. The experimental results show that the sandstone types of Chang-10 reservoir in Wuqi–Ansai Oilfield are mainly medium-fine arkose and lithic arkose. The pore types are mainly intergranular pore, feldspar pore, turbiditic zeolite pore and cuttings pore. The combination type of pore-throat belongs to mesopore–micropore and microlarynx–microlarynx. By mercury injection experiment analyzed the characteristic of capillary pressure curve, Chang-10 reservoir in Wuqi–Ansai Oilfield pore structures is classified into Type I, Type II, Type III and Type IV due to the different movable fluid occurrence features. The occurrence features of movable fluid are obviously controlled by the pore-throat, and the orders of control effect from strong to weak are from Type I, Type II, Type III to IV The saturation of movable fluid gradually becomes low when the pore-throat radius decreases.

Sign in / Sign up

Export Citation Format

Share Document