scholarly journals Annual Heating and Hot Water Load Reduction Effect of Air-Based Solar Heating System Using Thermal Simulation

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1054 ◽  
Author(s):  
Youngjin Choi ◽  
Masayuki Mae ◽  
Hyunwoo Roh ◽  
Wanghee Cho

This study examines the effect of an air-based solar heating system that can be used directly for convection heating while minimizing thermal leakage. To compare the effect of reducing the heating and hot water load when using the system, a simulation model of the system is created, and annual load calculations are performed. The results of the simulation study show that the annual heating load is reduced by 5.39 GJ and the hot water load is reduced by 10.32 GJ when using the air-based solar heating system, resulting in a 48.3% annual load reduction effect. In addition, by analyzing the thermal balance of the indoor space based on the application of the air-based solar heating system, the problem of the existing system is elucidated. In order to improve the performance of the system as shown in the thermal balance, it is necessary not only to improve the performance of the collector, but also to review its thermal storage, insulation, and proper control.

2021 ◽  
Author(s):  
Jamie Fine

Society’s use of fossil fuels has led to increasingly high levels of CO2 in the atmosphere. These levels have been linked to global average temperature rises, and increases in the severity and frequency of major weather events. To combat these effects, nations around the world have committed to reducing their CO2 emissions, and transition to renewable energy. This thesis focuses on the development of a novel solar heating system, which combines a hybrid solar panel and cascade heat pump. The thesis begins by presenting a high-level literature review of solar and heat pump technologies, followed by the initial design development of the system. Two design iterations are presented, illustrating that the final design was selected because it exhibits improved peak heat output, and reduced sensitivity to panel temperature. Next, a manuscript-based chapter is presented that focuses on utilizing the proposed solar heating system for water distillation. Case studies are presented that compare the performance of the proposed system with a solar still at four different locations. The final conclusion from these studies is that using the proposed system offers area-based performance improvements of 780% compared to a basic solar still. A second manuscript-based study is then presented, which focuses on utilizing the proposed solar heating system for domestic hot water production. Additional case studies are detailed that compare the proposed system to an evacuated tube design, and a single heat pump. The conclusions from these studies are that the proposed system exceeds the performance of the evacuated tube system by up to 64%, and that the proposed system is most beneficial during seasons with higher average dry-bulb temperatures, and increased solar irradiation. A final manuscript-based study is then presented, which focuses on a methodology for improving alternate mode thermal performance estimates for hybrid solar panels. The conclusion from this study is that the proposed methodology can successfully estimate thermal performance within 5% of actual values. Each of these studies contributes to the project goal of developing a novel solar energy heating system, which can be further developed to reduce global CO2 emissions, and reduce the effects of climate change.


2021 ◽  
Author(s):  
Jamie Fine

Society’s use of fossil fuels has led to increasingly high levels of CO2 in the atmosphere. These levels have been linked to global average temperature rises, and increases in the severity and frequency of major weather events. To combat these effects, nations around the world have committed to reducing their CO2 emissions, and transition to renewable energy. This thesis focuses on the development of a novel solar heating system, which combines a hybrid solar panel and cascade heat pump. The thesis begins by presenting a high-level literature review of solar and heat pump technologies, followed by the initial design development of the system. Two design iterations are presented, illustrating that the final design was selected because it exhibits improved peak heat output, and reduced sensitivity to panel temperature. Next, a manuscript-based chapter is presented that focuses on utilizing the proposed solar heating system for water distillation. Case studies are presented that compare the performance of the proposed system with a solar still at four different locations. The final conclusion from these studies is that using the proposed system offers area-based performance improvements of 780% compared to a basic solar still. A second manuscript-based study is then presented, which focuses on utilizing the proposed solar heating system for domestic hot water production. Additional case studies are detailed that compare the proposed system to an evacuated tube design, and a single heat pump. The conclusions from these studies are that the proposed system exceeds the performance of the evacuated tube system by up to 64%, and that the proposed system is most beneficial during seasons with higher average dry-bulb temperatures, and increased solar irradiation. A final manuscript-based study is then presented, which focuses on a methodology for improving alternate mode thermal performance estimates for hybrid solar panels. The conclusion from this study is that the proposed methodology can successfully estimate thermal performance within 5% of actual values. Each of these studies contributes to the project goal of developing a novel solar energy heating system, which can be further developed to reduce global CO2 emissions, and reduce the effects of climate change.


Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1420 ◽  
Author(s):  
Beungyong Park ◽  
Seong Ryong Ryu ◽  
Chang Heon Cheong

In this paper, a novel combined radiation-convection floor heating system is shown. This study uses practice-based learning and investigated the thermal performance of a combined radiation-convection floor heating system with a water heat pump system by evaluating the thermal environment and energy consumption in an experimental test. A new method that analyzed the thermal performance of four different controls was developed and applied. The results of the surface temperature distributions demonstrated that Mode 1, which uses only convection, had the lowest floor temperature and was thus considered inappropriate for occupants who sleep on the floor. By contrast, Modes 2, 3, and 4 showed high floor surface temperatures as hot water was supplied to the radiant heating panel. The predicted mean vote (PMV) results suggest that radiant floor heating is not appropriate for intermittent heating. In other words, occupants of single residences who return home at night will experience a long period of discomfort if they heat their room using floor heating. In this case, Mode 1, which is convection heating, and Modes 3 and 4, which represent mixed modes provide a more comfortable environment. The difference between this experimental study and previous research is that four different control modes for a combined radiation-convection system were evaluated based on the same location of the equipment in a laboratory. Furthermore, we studied the long-term real-scale thermal performance using panel and energy consumption.


2018 ◽  
Vol 64 ◽  
pp. 02004 ◽  
Author(s):  
Choi Youngjin

In this study, it is proposed a heating and hot water system for a house using the air-based solar collection. The performance of existing solar heating system is analysed by annual simulation and the problems and the effect of thermal characteristics of the system are investigated due to change of heat collecting surface, heat storage method, capacity, building insulation performance and so on. Furthermore, it presents an improvement plan that maximizes the effect of the system and the performance of the system.


Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2286 ◽  
Author(s):  
Youngjin Choi ◽  
Hyun Bae Kim

To examine the effects of solar heat utilization, it is necessary to classify the solar-use climate in East Asia based on climatic factors that affect load reduction by solar heating systems. In this study, annual load simulations are performed on weather data in 842 sites in Japan to analyze the climatic factors that impact the load reduction effect of the solar heating system. The analysis results were based on three climatic factors that strongly affect the heating load of a building: heating degree day (HDD18-18), daily solar global horizontal irradiance, and solar-heat available days. Furthermore, to distinguish the climate for the use of solar heat in East Asia, climate classification was done according to three climatic factors using the weather data of 1176 sites in East Asia. Consequently, the climate of solar thermal utilization in East Asia can be classified into 88 areas. Based on the regional classification for solar heat utilization proposed in this study, it will be possible to examine the effect of load reduction and applicability according to the use of solar heat in each region in the future.


Author(s):  
Yin Hang ◽  
Ming Qu

Solar absorption cooling has been an intriguing research subject since 1970. However, it is not widely applied because the first cost of the system is high, the commercial hot water absorption chiller is not mature, the site demonstration and evaluation are not adequate and the price of conventional fossil energy sources is relatively low. This paper investigates the commercialization potentials of solar absorption cooling and solar heating system by comparing the life cycle cost between it and the conventional electrical chiller cooling and gas-fired boiler heating system. A computational model has been programmed in the Engineering Equation Solver (EES) to analyze the economical performances of the two systems applied to a dedicated building. The model considers the cost of capital, installation, operation and maintenance, the discount rate, the fuel prices, and the inflation rates. The result of the model indicated that given the present fuel cost, the solar absorption cooling and heating system is not as economic as the conventional system especially when its size is small. However, according to the sensitivity analysis carried, the solar absorption cooling and heating system could compete with the conventional cooling and heating system when the electricity price and fuel inflation increase.


2019 ◽  
Vol 18 (2) ◽  
pp. 26
Author(s):  
R. R. Barbosa ◽  
M. Carvalho

A clear and direct guide for the design of a solar heating system is presented herein, focused on industrial applications. This guide focuses on the design of solar water heating systems for nonresidential applications. The importance of considering climatic conditions throughout the year is highlighted herein, along with reliable solar radiation data. Solar heating water systems are essential for the diversification of the Brazilian energy matrix and rationalization of the energy resources available. The system is initially dimensioned without the consideration of losses. Then, the required procedure to calculate thermal losses is described, and it is verified that the main losses occur in solar collectors and storage. After careful consideration of the hot water consumption profile and the results obtained in the calculation of the main thermal losses, the storage volume was doubled to guarantee the satisfaction of energy demands.


2014 ◽  
Vol 501-504 ◽  
pp. 2315-2318
Author(s):  
Jin Bin Li ◽  
Xiao Wei Zhao ◽  
Xiao Fei Lu

Based on the climate characteristics of the region which is hot in summer and cold in winter , this article introduces a solar energy heating technology, taking Hangzhou as an example and combining the theory of building energy efficiency. It is a collector-tank-double pump cycle of floor heating system, combining solar heating system with solar hot water system. Collectors are concentrating vacuum tube collectors, which can efficiently use solar energy. Combining solar collector with the building integration, we can use solar energy resources, and it can play shading effect.


Sign in / Sign up

Export Citation Format

Share Document