scholarly journals Study on Dust Deposition Mechanics on Solar Mirrors in a Solar Power Plant

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4550 ◽  
Author(s):  
Xueqing Liu ◽  
Song Yue ◽  
Luyi Lu ◽  
Jianlan Li
Keyword(s):  
Power Plants ◽  
Solar Power ◽  
Renewable Energy Sources ◽  
Dust Particles ◽  
Particle Collision ◽  
Energy Sources ◽  
Solar Power Plant ◽  
Dust Deposition ◽  
Research Results ◽  
Solar Power Plants

Solar energy is considered to be one of most promising renewable energy sources because of its availability and cleanliness. The phenomenon of dust deposition on solar mirrors greatly reduces the power generation of solar power plants. In this work, the motion behaviors and deposition mechanics of dust particles are analyzed by the discrete element method (DEM). The effects of environmental and solar mirror conditions and particle self-factors on dust deposition weight are systematically studied here. The research results show that dust particles, after particle collision, immediately adhere to the mirror or rebound and finally flow away from the mirror, or they otherwise may remain stationary after making some relative motion. Alternatively, they may glide for some distance and finally come to rest on the mirror or leave from the system. Different motion behaviors after particle collision depend on different leading forces. Here, the leading forces are the liquid bridge force (Fc) and the contact force (Fb). When the leading forces are Fc, or Fc, and Fb, the dust particles will be deposited on the solar mirror. Besides, the force Fc cannot be negligible when studying the motion processes of dust particles. The dust deposition weight on solar mirrors can be controlled by altering the environmental and solar mirror conditions, and particle self-factors. In essence, dust deposition weight on solar mirrors decreases when decreasing the leading force Fc or increasing the leading force Fb. The research results give theoretical guidance for the prevention and removal of dust deposition on solar mirrors.

Socio-environmental and Economic Problems of Solar Panels Recycling

2020 ◽  
pp. 48-55
Author(s):  
Olena I. Matsenko ◽  
Vladyslav S. Tereshchenko ◽  
Vladyslav S. Piven ◽  
Andrii A. Panchenko ◽  
Evhenyi A. Perekhod
Keyword(s):  
Renewable Energy ◽  
Alternative Energy ◽  
Power Plants ◽  
Solar Power ◽  
Negative Impact ◽  
Renewable Energy Sources ◽  
Economic Problem ◽  
Energy Sources ◽  
Solar Power Plants ◽  
Technical Specifications

The use of alternative energy sources, in particular solar energy, has gained rapid growth in recent years. This trend is prompting manufacturers of equipment for solar power plants to increase production volumes. At the same time, the question arises of the disposal of used modules, because each material has its service life. According to technical specifications, the average life of solar modules and batteries is 25-30 years. Decommissioning may occur earlier than this time due to the following reasons – moral and physical deterioration, mechanical damage, replacement of obsolete equipment with new, modernization of solar power plants. Already in 2030, it will be necessary to replace the solar modules installed in 2000. Therefore, there are acute questions not only regarding the development of technologies for processing waste equipment from solar power plants but also organizational and economic methods. This article discusses the main problems that arise during the utilization and recycling of solar modules, analyzes the experience of countries in resolving these issues. After all, the use of renewable energy sources should minimize the negative impact on the environment from energy production at all stages – from the production of equipment for a power plant to the disposal and recycling of this equipment. Keywords: solar panel, recycling, economic method, solar power, natural resource, economic problem, environment, renewable energy.

Analiza ekonomske opravdanosti investiranja u solarnu elektranu sa vertikalno postavljenim bifacijalnim fotonaponskim modulima u perspektivnim uslovima slobodnog tržišta

2021 ◽  
Vol 23 (1) ◽  
pp. 22-28
Author(s):  
Đorđe Lazović ◽  
◽  
Kristina Džodić ◽  
Željko Đurišić
Keyword(s):  
Renewable Energy ◽  
Power Plant ◽  
Electricity Market ◽  
Power Plants ◽  
Solar Power ◽  
Renewable Energy Sources ◽  
Plant Production ◽  
Energy Sources ◽  
Solar Power Plant ◽  
The Future

The future of European energy is moving towards a single European electricity market and an increasing share of renewables in the overall production mix. After the expiration of governmental incentive measures, power plants based on renewable energy sources will enter the liberalized market, where electricity prices will largely depend on the production of renewable energy sources. In order to achieve the maximum possible profit of the power plant under such conditions, it is necessary to consider the possibility of investing in solutions that are less represented today, but with the prospect of being more profitable in the future. Such a solution is a solar power plant consisting of vertically placed bifacial modules whose active surfaces are oriented in the east-west direction. This configuration of the power plant can achieve higher production in periods of high prices, and thus higher profits from the sale of electricity. On the other hand, such a solution is more expensive than a standard solar power plant with monofacial modules. In this paper, a comparison of return on investment in a bifacial power plant and a monofacial power plant with existing and prospective market conditions is performed. PVsyst software was used to analyze the solar potential and production profiles of photovoltaic power plants. The influence of solar power plant production on the price of electricity was investigated on the example of Germany. Based on this research, a prognostic model of the daily price diagram on the unified European market until 2040 was formed which served for the analysis of the profitability of investments in the two considered variants of the solar power plant realization.

Analiza ekonomske opravdanosti investiranja u solarnu elektranu sa vertikalno postavljenim bifacijalnim fotonaponskim modulima u perspektivnim uslovima slobodnog tržišta

2021 ◽  
Vol 23 (3) ◽  
pp. 37-44
Author(s):  
Đorđe Lazović ◽  
◽  
Kristina Džodić ◽  
Željko Đurišić
Keyword(s):  
Power Plant ◽  
Electricity Market ◽  
Power Plants ◽  
Solar Power ◽  
Renewable Energy Sources ◽  
Economic Feasibility ◽  
Plant Production ◽  
Solar Power Plant ◽  
Solar Power Plants ◽  
East West

After the expiration of governmental incentive measures for renewable energy sources integration, economic feasibility of investing into solar power plants will highly depend on compatibility between production and variable prices. In order to achieve the maximum possible profit of the power plant in liberalized electricity market, it is necessary to consider the possibility of investing in solutions that are not common today, but with the potential of being more profitable in the future. Such a solution is a solar power plant consisting of vertically placed bifacial modules whose active surfaces are oriented in the east-west direction. This configuration of the power plant can achieve higher production in periods of high prices, and thus higher profits from the sale of electricity. On the other hand, such a solution is more expensive than a standard solar power plant with monofacial modules. In this paper, a comparison of return on investment in a bifacial power plant and a monofacial power plant with existing and prospective market conditions is performed. The influence of solar power plant production on the price of electricity was investigated on the example of Germany. Based on this research, a prognostic model of the daily price diagram on the unified European market until 2040 was formed. It served for the analysis of the profitability of investments in the two considered variants of the solar power plant realization.

Impact of wind and solar power plants on the reliability of the IPS

2021 ◽  
Vol 13 (4) ◽  
pp. 257-266
Author(s):  
V. A. Nepomnyashchiy
Keyword(s):  
Power Systems ◽  
Power System ◽  
Power Plants ◽  
Solar Power ◽  
Renewable Energy Sources ◽  
Power Industry ◽  
Energy Sources ◽  
Solar Power Plants ◽  
Additional Fuel Consumption ◽  
Additional Fuel

One of the most promising areas in the development of the electric power industry is generally regarded to lie in expanding the share of renewable energy sources (RES) in the electric energy balance of power systems in the form of wind and solar power plants (WPP and SPP), the saving of organic fuel (coal, gas, fuel oil) and the reduction of environmentally harmful emissions into the atmosphere considered to be their most important advantages. However, the impact of RES on the controllability of the modes of operation of electric power systems and on the reliability of the IPS operation remains quite unexplored.Currently, the global energy industry uses 318 million kW of WPP and about 142.4 million kW of SPP, of which the major West European countries account for about 227 million kW, or 49.3%. On average, wind and solar power plants account for almost 30% of the total generating capacity in Western Europe, with Denmark having the largest share of WPP (47%) and Germany having the highest share of SPP (18.6%). However, an uncontrolled growth in the share of WPP and SPP in the structure of generating capacities of power systems begins to manifest itself in a sharp decline in the reliability of the power industry due to the fact that a number of negative properties of WPP and SPP have not been taken into account (at least, to a sufficient extent), which manifested themselves in practice in a system accident in the UK power system that occurred on August 09, 2019, when, as a result of an "ordinary" short circuit, a system accident occurred, with up to 1.1 million consumers with a total load of 1690 MW disconnected from the power supply system for a period of 15 to 45 minutes. This is estimated to have resulted in economic losses for consumers amounting to 12.3–15.0 million USD.The reason for this is that the high sensitivity of WPP, SPP, CCGT and gas piston units to voltage and frequency drops is not properly considered in conditions of insufficient capacity of the rotating (mobile) generation reserve. Damage can be prevented by increasing the rotating reserve within the available reserve of the power system, which will require an increase in funds for maintaining the same due to additional fuel consumption. The ratio of reduction of probable damage to consumers and the cost of additional fuel consumption for maintenance of a required rotating reserve in the power system allows to economically substantiate the strategy and scale of introduction of renewable energy sources to the power industry. 

WIND-DIESEL INSTALLATIONS FOR ISOLATED FAR NORTH AREAS

2020 ◽  
Author(s):  
Александр Григорьевич Комков ◽  
Александр Константинович Сокольский
Keyword(s):  
Energy Supply ◽  
Alternative Energy ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Economic Potential ◽  
Far North ◽  
Alternative Energy Sources ◽  
Current State ◽  
Solar Power Plants

В статье рассмотрено современное состояние энергоснабжения и перспективы развития альтернативных источников энергии на территории Крайнего Севера. Отмечено, что несмотря на острую потребность во внедрении возобновляемых источников энергии, установленные мощности всех ветряных и солнечных электростанций в регионе не превышают 7-8 МВт. Также в работе рассчитаны технический и экономический потенциал ветровой энергии региона, на основании которых подобрана наиболее эффективная установка. The article discusses the current state of energy supply and the prospects for the development of alternative energy sources in the Far North. It is noted that despite the urgent need for the introduction of renewable energy sources, the installed capacities of all wind and solar power plants in the region do not exceed 7-8 MW. Also, the technical and economic potential of the region’s wind energy was calculated based on which the most efficient installation was selected.

scholarly journals MODELING OF COMPATIBLE WORK OF DISTRIBUTED POWER SOURCES OF ELECTRIC POWER AND CENTRALISED POWER SUPPLY

2018 ◽  
pp. 189-195
Author(s):  
Petro Lezhnyuk ◽  
Iryna Hunko ◽  
Juliya Malogulko ◽  
Iryna Kotylko ◽  
Lіudmyla Krot
Keyword(s):  
Power Supply ◽  
Power Plants ◽  
Solar Power ◽  
Energy Sources ◽  
Hydroelectric Power Station ◽  
Hydroelectric Power ◽  
Distributed Energy ◽  
Power Stations ◽  
Asynchronous Generator ◽  
Solar Power Plants

Urgency of the research. Current trends of distributed generation development in Ukraine indicate a rapid generation in-crease from renewable energy plants. Most developed countries gradually refuse from the fossil fuels use and invest more and more to the “green” energy. Therefore, there is a need for a detailed study of the operation conditions of distributed energy sources due to their instability, as well as the processes that arise in distribution electric networks with diverse types of distributed energy sources. Target setting. In the producing process of power energy by distributed energy sources due to the increase in their num-ber, there are situations where several renewable sources of energy operate to only one system of buses. Thus, such distributive networks acquire the features of a local power system, which complicates the control process of such systems, and also there is a problem with the electricity supply of consumers. Actual scientific researches and issues analysis. The analysis of publications suggests that in literature more attention is paid to studying the operating modes of solar power plants, or small hydroelectric power plants. However, almost no attention was paid to the study of their cooperation work. Uninvestigated parts of general matters defining. Only a few works are devoted to the study of the cooperation of the diverce sources of distributed energy sources in the local electrical systems. That is why, their impact on power distribution networks and on the grid in general has not been studied extensively. The research objective. In this article was considered the influence of asynchronous generators on small hydroelectric power plants on the operation modes of distribution electrical networks, and were investigated the processes that are occurring in local power systems with different types of distributed energy sources. The statement of basic materials. Based on the research results, was developed a computer model of a such system in the PS CAD software environment. Two solar stations and one small hydroelectric power station with an asynchronous generator were connected to the power supply. It was shown the simulation of two modes of operation: a joint operation of a small hydroelectric power station, two solar power stations and a power supply center; a joint operation of a small hydroelectric pow-er plant, two solar power stations and a power supply disconnected. Conclusions. As a result of computer simulation, it is shown that by switching on a small hydroelectric power plant with an asynchronous generator in the case of an emergency shutdown of centralized power supply, it is possible to restore the work of solar power plants, and thus partially or completely restore the power supply of consumers.

scholarly journals Improving the Efficiency of Solar Power Plants

2020 ◽  
Vol 30 (3) ◽  
pp. 480-497
Author(s):  
Dmitriy S. Strebkov ◽  
Yuriy Kh. Shogenov ◽  
Nikolay Yu. Bobovnikov
Keyword(s):  
Power Plant ◽  
Solar Radiation ◽  
Solar Energy ◽  
Power Plants ◽  
Solar Power ◽  
Horizontal Surface ◽  
Solar Power Plant ◽  
Utilization Factor ◽  
Working Surface ◽  
Solar Power Plants

Introduction. An urgent scientific problem is to increase the efficiency of using solar energy in solar power plants (SES). The purpose of the article is to study methods for increasing the efficiency of solar power plants. Materials and Methods. Solar power plants based on modules with a two-sided working surface are considered. Most modern solar power plants use solar modules. The reflection of solar radiation from the earth’s surface provides an increase in the production of electrical energy by 20% compared with modules with a working surface on one side. It is possible to increase the efficiency of using solar energy by increasing the annual production of electric energy through the creation of equal conditions for the use of solar energy by the front and back surfaces of bilateral solar modules. Results. The article presents a solar power plant on a horizontal surface with a vertical arrangement of bilateral solar modules, a solar power station with a deviation of bilateral solar modules from a vertical position, and a solar power plant on the southern slope of the hill with an angle β of the slope to the horizon. The formulas for calculating the sizes of the solar energy reflectors in the meridian direction, the width of the solar energy reflectors, and the angle of inclination of the solar modules to the horizontal surface are given. The results of computer simulation of the parameters of a solar power plant operating in the vicinity of Luxor (Egypt) are presented. Discussion and Conclusion. It is shown that the power generation within the power range of 1 kW takes a peak value for vertically oriented two-sided solar modules with horizontal reflectors of sunlight at the installed capacity utilization factor of 0.45. At the same time, when the solar radiation becomes parallel to the plane of vertical solar modules, there is a decrease in the output of electricity. The proposed design allows equalizing and increasing the output of electricity during the maximum period of solar radiation. Vertically oriented modules are reliable and easy to use while saving space between modules.

Pengembangan Sistem Pengaturan Suplai Beban (Ats) Pada Pembangkit Listrik Tenaga Hibrid Berbasiskan Mikrokontroler

Kilat ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 261-271
Author(s):  
Sugeng Purwanto
Keyword(s):  
Power Plant ◽  
Alternative Energy ◽  
Power Plants ◽  
Solar Power ◽  
Electrical Energy ◽  
Solar Power Plant ◽  
Solar Panels ◽  
Hybrid Power ◽  
Solar Power Plants ◽  
One Year

ABSTRACT Renewable energy is potential alternative energy to replace the central role of fossil energy which has been going on since the early 20th century. The solar power plant is alternative energy, especially for households and industry, and can be designed as a hybrid power plant consisting of solar panels, batteries, an automatic transfer switch (ATS), and a grid. This research will focus on developing ATS based on a microcontroller. It functions to regulate the load supply automatically from the three sources of electrical energy, like solar panels, batteries, and grid while the microcontroller functions to monitor the transfer of power from the solar power plant to grid and voltage movements in the system so that current and voltage data can be recorded from time to time to improve system reliability, effectiveness, and efficiency of the tool. ATS components consist of MCB, magnetic contactor, timer H3CR, relay, 2000VA inverter, solar charge controller 100A, NodeMCU ESP8266 IoT, and battery 12V 100AH. This research is conducted in one year to produce ATS based on a microcontroller that can automatically regulate the supply of loads from the three sources of electrical energy with a good level of efficiency and stability.  Keywords: solar power plants, hybrid power plants, an automatic transfer switch.  ABSTRAK Energi baru terbarukan merupakan energi alternatif yang potensial untuk menggantikan peran sentral dari energi fosil yang telah berlangsung sejak awal abad ke 20. PLTS merupakan salah satu energi alternatif penyedia energi listrik untuk rumah tangga dan industri serta dapat dirancang sebagai sistem pembangkit listrik tenaga hibrid (PLTH) yang terdiri dari panel surya, baterai, sistem pengaturan beban atau ATS (automatic transfer switch) dan jaringan PLN. Peneltian difokuskan pada pengembangan sistem ATS berbasiskan mikrokontroler. ATS berfungsi untuk mengatur suplai beban secara otomatis dari ketiga sumber energi listrik yaitu panel surya, baterai dan PLN sedangkan mikrokontroler berfungsi memonitor perpindahan daya dari PLTS ke sumber PLN dan pergerakan tegangan pada sistem sehingga dapat dilakukan pencatatan data arus dan tegangan dari waktu ke waktu sehingga dapat meningkatkan keandalan sistem, efektifitas dan efisiensi alat. Komponen ATS terdiri dari MCB, magnetic contactor, timer H3CR, relay, inverter 2000VA, solar charge controller 100A, NodeMCU ESP8266 IoT, dan baterai 12V 100Ah. Penelitian ini akan dilakukan dalam periode satu tahun menghasilkan ATS berbasiskan mikrokontroler yang dapat mengatur suplai beban secara otomatis dari ketiga sumber energi listrik dengan tingkat efisiensi dan kestabilan yang baik. Tim penelitian ini tediri dari 3 orang dan berasal dari program studi teknik elektro, IT PLN.  Kata kunci: pembangkit listrik tenaga surya, pembangkit listrik tenaga hibrid, pengaturan suplai beban.

scholarly journals Operation experience of solar power plants connected to the Russian distributed grid

2018 ◽  
Vol 245 ◽  
pp. 07011 ◽  
Author(s):  
Lev Koshcheev ◽  
Evgeniy Popkov ◽  
Ruslan Seit
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Solar Power Plant ◽  
Hydro Power ◽  
Solar Power Plants

The islanding condition of grid-tied solar power plant with hydro power plant of commensurable power is considered in this article. Based on the results of the article, the relevant conclusions were drawn.

scholarly journals COMPARATIVE INVESTIGATION OF FIXED AND TRACKING PV SOLAR POWER PLANTS ENERGY EFFICIENCY

2019 ◽  
Vol 10 (2) ◽  
Author(s):  
Dragoljub Mirjanić ◽  
Tomislav Pavlović ◽  
Ivana Radonjić ◽  
Darko Divnić
Keyword(s):  
Energy Efficiency ◽  
Power Plant ◽  
Monitoring System ◽  
Power Plants ◽  
Solar Power ◽  
Comparative Investigation ◽  
Solar Power Plant ◽  
Basic Information ◽  
Solar Power Plants

The paper provides basic information on fixed (stationary), one-axis tracking and dual-axis tracking PV solar power plants. In this regard, a schematic overview of the PV solar power plant and basic information on its components (solar modules, inverters, monitoring system, etc.) are given. The following is a description of the fixed, one-tracking and dual-tracking PV solar power plant and their energy efficiency. Finally, measured results of power and temperature of fixed and dual-axis tracking solar modules of 50 W are presented.

Sign in / Sign up

Export Citation Format

Share Document