scholarly journals Assessment of Sinkhole Hazard in the Area of Shallow Mining Workings Using Electrical Resistivity Tomography

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8197
Author(s):  
Roman Ścigała ◽  
Stanisław Duży ◽  
Katarzyna Szafulera ◽  
Marek Kruczkowski ◽  
Grzegorz Dyduch ◽  
...  
Keyword(s):  
Electrical Resistivity ◽  
Rock Mass ◽  
Electrical Resistivity Tomography ◽  
Resistivity Tomography ◽  
Discontinuous Surface ◽  
Near Surface ◽  
Surface Rock ◽  
The Past ◽  
Upper Silesian Coal Basin ◽  
Sinkhole Hazard

This paper presents the results of investigating shallow rock mass layers with the use of electrical resistivity tomography. The aim of the study was to assess the condition of near-surface rock mass layers located above shallow mining workings of a historical mine in view of the possibility of the occurrence of loose zones or possible voids that could pose a sinkhole hazard for the surface. The study was carried out under the conditions of the “Sztygarka” Training Mine and Museum in Dąbrowa Górnicza City (Upper Silesian Coal Basin, Poland), where discontinuous surface deformations occurred in the past in the form of sinkholes. The study and its interpretation indicate the existence of a sinkhole hazard due to the ongoing processes of the transformation of the near-surface rock mass layers above the shallow workings of a historical mine.

scholarly journals Surface Deformations Resulting from Abandoned Mining Excavations

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2495
Author(s):  
Piotr Strzałkowski ◽  
Roman Ścigała ◽  
Katarzyna Szafulera ◽  
Konrad Kołodziej
Keyword(s):  
Electrical Resistivity ◽  
Rock Mass ◽  
Public Safety ◽  
Electrical Resistivity Tomography ◽  
Original Model ◽  
Resistivity Tomography ◽  
Mining Areas ◽  
The Past ◽  
Underground Workings ◽  
Sinkhole Hazard

The occurrence of surface discontinuous deformations in post-mining areas is currently a significant and important problem, due to both the frequency of their occurrence and the threat they pose to public safety. This paper presents the results of research concerning the possibility of sinkhole formation in the areas of abandoned mining excavations. For the purpose of assessing the condition of the rock mass disturbed by the existence of numerous mining excavations, electrical resistivity tomography investigations were carried out for the selected area where mining was undertaken in the past at shallow depths and many underground workings accessing the deposit exist. The sinkhole hazard was also analysed theoretically with a new original model based on the solution of A. Sałustowicz’s pressure arch theory.

scholarly journals Linear discontinuous deformations in the light of investigations performed with ERT method

2018 ◽  
Vol 66 ◽  
pp. 01006 ◽  
Author(s):  
Piotr Strzałkowski ◽  
Roman Ścigała ◽  
Katarzyna Szafulera ◽  
Marek Kruczkowski
Keyword(s):  
Electrical Resistivity ◽  
Rock Mass ◽  
Electrical Resistivity Tomography ◽  
Underground Mining ◽  
Mining Area ◽  
Geological Structure ◽  
Mining Operations ◽  
Resistivity Tomography ◽  
Near Surface ◽  
Geophysical Surveys

The article presents an example of using the electrical resistivity tomography method to assess the condition of shallow rock mass layers in the area of linear discontinuous deformations created in the past due to underground mining activity. The research concerned the mining area of one of the Upper Silesian Coal Basin mines, where intensive mining operations have been conducted for several decades. In the considered area, linear discontinuous deformations were created in the form of ground steps. Their location is related to characteristic layout of deposit accessing roadways and extraction fronts in several coal seams. The article analyzes the geological structure of the deposit and the state of deformation of the rock mass caused by mining operations. In order to evaluate the hitherto impacts, appropriate calculations of the extraction influence were performed, assuming different views on the summation of horizontal strain in long time intervals. The calculations were carried out using the theory of W.Budryk - S. Knothe. Theoretical considerations were supplemented with geophysical surveys performed with using electrical resistivity tomography. Obtained results of the near-surface layers ERT imaging in the form of resistivity profiles confirm the existence of rock loosening zones in the areas of discontinuous deformations occurrence.

Decennial multi-approach monitoring of thermo-hydro-mechanical processes, Kammstollen outdoor laboratory, Zugspitze (Germany)

2021 ◽  
Author(s):  
Riccardo Scandroglio ◽  
Till Rehm ◽  
Jonas K. Limbrock ◽  
Andreas Kemna ◽  
Markus Heinze ◽  
...  
Keyword(s):  
Electrical Resistivity ◽  
Electrical Resistivity Tomography ◽  
Environmental Research ◽  
Permafrost Degradation ◽  
Earth Surface ◽  
Data Set ◽  
Resistivity Tomography ◽  
Near Surface ◽  
Permafrost Rock ◽  
Austrian Alps

<p>The warming of alpine bedrock permafrost in the last three decades and consequent reduction of frozen areas has been well documented. Its consequences like slope stability reduction put humans and infrastructures at high risk. 2020 in particular was the warmest year on record at 3000m a.s.l. embedded in the warmest decade.</p><p>Recently, the development of electrical resistivity tomography (ERT) as standard technique for quantitative permafrost investigation allows extended monitoring of this hazard even allowing including quantitative 4D monitoring strategies (Scandroglio et al., in review). Nevertheless thermo-hydro-mechanical dynamics of steep bedrock slopes cannot be totally explained by a single measurement technique and therefore multi-approach setups are necessary in the field to record external forcing and improve the deciphering of internal responses.</p><p>The Zugspitze Kammstollen is a 850m long tunnel located between 2660 and 2780m a.s.l., a few decameters under the mountain ridge. First ERT monitoring was conducted in 2007 (Krautblatter et al., 2010) and has been followed by more than one decade of intensive field work. This has led to the collection of a unique multi-approach data set of still unpublished data. Continuous logging of environmental parameters such as rock/air temperatures and water infiltration through joints as well as a dedicated thermal model (Schröder and Krautblatter, in review) provide important additional knowledge on bedrock internal dynamics. Summer ERT and seismic refraction tomography surveys with manual and automated joints’ displacement measurements on the ridge offer information on external controls, complemented by three weather stations and a 44m long borehole within 1km from the tunnel.</p><p>Year-round access to the area enables uninterrupted monitoring and maintenance of instruments for reliable data collection. “Precisely controlled natural conditions”, restricted access for researchers only and logistical support by Environmental Research Station Schneefernerhaus, make this tunnel particularly attractive for developing benchmark experiments. Some examples are the design of induced polarization monitoring, the analysis of tunnel spring water for isotopes investigation, and the multi-annual mass monitoring by means of relative gravimetry.</p><p>Here, we present the recently modernized layout of the outdoor laboratory with the latest monitoring results, opening a discussion on further possible approaches of this extensive multi-approach data set, aiming at understanding not only permafrost thermal evolution but also the connected thermo-hydro-mechanical processes.</p><p> </p><p> </p><p>Krautblatter, M. et al. (2010) ‘Temperature-calibrated imaging of seasonal changes in permafrost rock walls by quantitative electrical resistivity tomography (Zugspitze, German/Austrian Alps)’, Journal of Geophysical Research: Earth Surface, 115(2), pp. 1–15. doi: 10.1029/2008JF001209.</p><p>Scandroglio, R. et al. (in review) ‘4D-Quantification of alpine permafrost degradation in steep rock walls using a laboratory-calibrated ERT approach (in review)’, Near Surface Geophysics.</p><p>Schröder, T. and Krautblatter, M. (in review) ‘A high-resolution multi-phase thermo-geophysical model to verify long-term electrical resistivity tomography monitoring in alpine permafrost rock walls (Zugspitze, German/Austrian Alps) (submitted)’, Earth Surface Processes and Landforms.</p>

scholarly journals CONTRIBUTION OF DEEP ELECTRICAL RESISTIVITY TOMOGRAPHY TECHNIQUE TO HYDROGEOLOGICAL STUDIES: CASES FROM AREAS IN KAVALA (NORTH GREECE)

2017 ◽  
Vol 43 (4) ◽  
pp. 1962
Author(s):  
G. Vargemezis ◽  
P. Tsourlos ◽  
I. Mertzanides
Keyword(s):  
Electrical Resistivity ◽  
Electrical Resistivity Tomography ◽  
Geological Structure ◽  
Resistivity Tomography ◽  
Near Surface ◽  
Resistivity Method ◽  
Area Of Interest ◽  
Vertical Electric Sounding ◽  
Hydrogeological Studies ◽  
2D And 3D

The most common geophysical method widely used in hydrogeological surveys concerning deep investigations (150-300m of depth) is the resistivity method and particularly the Vertical Electric Sounding (VES) using the Schlumberger array. VES interpretations assume 1D geoelectrical structure yet it is obvious that such an interpretation assumption is not valid in many cases where 2D and 3D geological features exist. In such cases the application of geoelectrical techniques which can provide both vertical and lateral information concerning the resistivity variations is required. Techniques such as the electrical resistivity tomography, mostly used for the 2D and 3D geoelectrical mapping of near surface applications can be adapted to be used for larger investigation depths provided that modified equipment (viz. cables) is used. In the present paper, the application of deep electrical resistivity tomography (ERT) techniques is applied. ERT array of 21 electrodes, at a distance of 50 meters between them (total length 1000 meters) has been used in several studied areas located in the prefecture of Kavala (North Greece). In several cases near surface structure has been compared with VLF data. The aim of the survey was to study in detail the geological-hydrogeological structure the area of interest in order to suggest the best location for the construction of hydrowells with the most promising results. The 2D images of the geological structure down to the depth of at least 200 meters allowed the better understanding of the behaviour of layered geological formations, since in several cases resistivity values have been calibrated with data from pre-existing boreholes.

scholarly journals Application of electric resistivity tomography for investigation of geological situation closed to railways

2019 ◽  
Vol 265 ◽  
pp. 03005
Author(s):  
Dmitriy Gorbach ◽  
Valeriya Yakimenko ◽  
Olga Konovalova
Keyword(s):  
Electrical Resistivity ◽  
Electrical Resistivity Tomography ◽  
Electric Resistivity ◽  
Practical Work ◽  
Surface Zone ◽  
Two Dimensional ◽  
Resistivity Tomography ◽  
Near Surface ◽  
Geological Situation ◽  
Engineering Geophysics

The paper reviews methods of engineering geophysics which can be applied to sections of railway tracks. The method of electrical resistivity tomography is used to study the properties of the geological situation under an engineering structure. In the course of practical work, two-dimensional geoelectric sections were obtained. Interpretation of the sections allowed to understand the structure of the near-surface zone.

scholarly journals Combining Electrical Resistivity Tomography and Satellite Images for Improving Evapotranspiration Estimates of Citrus Orchards

2019 ◽  
Vol 11 (4) ◽  
pp. 373 ◽  
Author(s):  
Daniela Vanella ◽  
Juan Ramírez-Cuesta ◽  
Diego Intrigliolo ◽  
Simona Consoli
Keyword(s):  
Electrical Resistivity ◽  
Water Stress ◽  
Soil Water ◽  
Electrical Resistivity Tomography ◽  
New Technologies ◽  
Water Status ◽  
Irrigation Season ◽  
Resistivity Tomography ◽  
Near Surface ◽  
Near Surface Geophysics

An adjusted satellite-based model was proposed with the aim of improving spatially distributed evapotranspiration (ET) estimates under plant water stress conditions. Remote sensing data and near surface geophysics information, using electrical resistivity tomography (ERT), were used in a revised version of the original dual crop coefficient (Kc) FAO-56 approach. Sentinel 2-A imagery were used to compute vegetation indices (VIs) required for spatially estimating ET. The potentiality of the ERT technique was exploited for tracking the soil wetting distribution patterns during and after irrigation phases. The ERT-derived information helped to accurately estimate the wet exposed fraction (few) and therefore the water evaporated from the soil surface into the dual Kc FAO-56 approach. Results, validated by site-specific ET measurements (ETEC) obtained using the eddy covariance (EC) technique, showed that ERT-adjusted ET estimates (ETERT) were considerably reduced (15%) when compared with the original dual Kc FAO-56 approach (ETFAO), soil evaporation overestimation being the main reason for these discrepancies. Nevertheless, ETFAO and ETERT showed overestimations of 64% and 40% compared to ETEC. This is because both approaches determine ET under standard conditions without water limitation, whereas EC is able to determine ET even under soil water deficit conditions. From the comparison between ETEC and ETERT, the water stress coefficient was experimentally derived, reaching a mean value for the irrigation season of 0.74. The obtained results highlight how new technologies for soil water status monitoring can be incorporated for improving ET estimations, particularly under drip irrigation conditions.

Target-oriented optimized survey design and quantitative comparison for 3D electrical resistivity tomography

2020 ◽  
Author(s):  
Lincheng Jiang ◽  
Gang Tian ◽  
Bangbing Wang ◽  
Amr Abd El-Raouf
Keyword(s):  
Electrical Resistivity ◽  
Electrical Resistivity Tomography ◽  
Survey Design ◽  
Quantitative Comparison ◽  
Data Set ◽  
Resistivity Tomography ◽  
Near Surface ◽  
Target Set ◽  
Survey Designs

<p>In recent decades, geoelectrical methods have played a very important role in near-surface investigation. The most widely used of these methods is electrical resistivity tomography (ERT). Regardless of the forward and inversion algorithms used, the original data collected from a survey is the most important factor for quality of the resulted model. However, 3D electrical resistivity survey design continues to be based on data sets recorded using one or more of the standard electrode arrays. There is a recognized need for the 3D survey design to get better resolution using fewer data. Choosing suitable data from the comprehensive data set is a great approach. By reasonable selecting, better resolution can be obtained with fewer electrodes and measurements than conventional arrays. Previous research has demonstrated that the optimized survey design using the 'Compare R' method can give a nice performance.</p><p>This paper adds target-oriented selection and modified the original 'Compare R' method. The survey design should be focused on specific target areas, which need a priori information about the subsurface properties. We select electrodes and configurations as the target set by the comprehensive set firstly which meets the requirements of the target area. The number of measurements and electrodes is much less than the comprehensive set and the model resolution matrix takes less time to calculate. At the next step for rank, we calculate the sensitivity matrix of the target set only once and then calculate the contribution degree of each measurement separately from it. The time of iterative calculation of the resolution matrix when measurements set changing is less than the original method.</p><p>The traditional method of evaluating RMS is not appropriate for comparing the quality of collected data by different survey designs. SSIM (structural similarity index) gives more reliable measures of image similarity better than the RMS. The curves of SSIM values in three dimensions and the average SSIM are given as quantitative comparisons. Besides, the frequency of electrodes utilized given to guides on selecting the highest used electrodes. Finally, the curves of the average relative resolution S and the number of electrodes as the number of measurements increase are given, which proves the method works effectively.</p><p>The results show the significance of using target-oriented optimized survey design, as it selects fewer electrodes and arrays than the original CR method. Also, it produces better resolution than conventional arrays and takes less calculation time. 3D SSIM, frequency of electrodes used, the relationship between average relative resolution, number of electrodes and number of measurements, these quantitative comparison methods can effectively evaluate the data collected in various survey designs.</p>

scholarly journals Quasi-3-D resistivity imaging – mapping of heterogeneous frozen ground conditions using electrical resistivity tomography

2009 ◽  
Vol 3 (3) ◽  
pp. 895-918 ◽  
Author(s):  
C. Kneisel ◽  
A. Bast ◽  
D. Schwindt
Keyword(s):  
Electrical Resistivity ◽  
Electrical Resistivity Tomography ◽  
Swiss Alps ◽  
Small Scale ◽  
Frozen Ground ◽  
Resistivity Tomography ◽  
Near Surface ◽  
Glacier Forefield ◽  
Mountain Permafrost ◽  
Ground Conditions

Abstract. Up to now an efficient 3-D geophysical mapping of the subsurface in mountainous environments with rough terrain has not been possible. A merging approach of several closely spaced 2-D electrical resistivity tomography (ERT) surveys to build up a quasi-3-D model of the electrical resistivity is presented herein as a practical compromise for inferring subsurface characteristics and lithology. The ERT measurements were realised in a small glacier forefield in the Swiss Alps with complex terrain exhibiting a small scale spatial variability of surface substrate. To build up the grid for the quasi-3-D measurements the ERT surveys were arranged as parallel profiles and perpendicular tie lines. The measured 2-D datasets were collated into one quasi-3-D file. A forward modelling approach – based on studies at a permafrost site below timberline – was used to optimize the geophysical survey design for the mapping of the mountain permafrost distribution in the investigated glacier forefield. Quasi-3-D geoelectrical imaging is a useful method for mapping of heterogeneous frozen ground conditions and can be considered as a further milestone in the application of near surface geophysics in mountain permafrost environments.

Foundation Evaluation of a Repeater Installation Building using Electrical Resistivity Tomography and Seismic Refraction Tomography

2019 ◽  
Vol 24 (1) ◽  
pp. 27-38
Author(s):  
B. Butchibabu ◽  
Prosanta K. Khan ◽  
P.C. Jha
Keyword(s):  
Electrical Resistivity ◽  
Electrical Resistivity Tomography ◽  
Seismic Refraction ◽  
P Wave ◽  
S Wave ◽  
Resistivity Tomography ◽  
Near Surface ◽  
Refraction Tomography ◽  
Subsurface Layers ◽  
Geophysical Investigations

Geophysical investigations were carried out for evaluation of damage and to assess the possible causes for repeated occurrence of damage at one of the buildings constructed for oil pumping in the northern part of India. Electrical Resistivity Tomography (ERT) and Seismic Refraction Tomography (SRT) techniques were adopted for studying the subsurface of the area around the building with an objective of ascertaining the cause of damage. High resolution imaging was done using both the techniques in this investigation. ERT delineated the presence of low resistivity (2 ohm-m) water filled voids below the structures and mapped different subsurface layers such as sandy soil, clay and sandstone in the study area. SRT revealed P-wave velocity ( V P ) of the subsurface medium in the range of 400–3,400 m/s. Corresponding densities and S-wave velocities ( V S ) were determined based on Gardner's and Castagna's relationships. Subsequently, the V P , V S and the modulus values were used in estimating compressibility of soil and rock strata. Results showed near surface layers were characterized by high compressibility (26.673 × 10 −5 Pa −1 ), decreases with depth. This paper presents the details of the site, techniques used in the investigation and correlation of geophysical results with lithological information, and the subsequent analysis for understanding the distress in the subsurface of the study area.

Sign in / Sign up

Export Citation Format

Share Document