scholarly journals Wood Anatomical Traits Reveal Different Structure of Peat Bog and Lowland Populations of Pinus sylvestris L. in the Carpathian Region

Forests ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 494
Author(s):  
Balázs Palla ◽  
Márta Ladányi ◽  
Klára Cseke ◽  
Krisztina Buczkó ◽  
Mária Höhn
Keyword(s):  
Cell Wall ◽  
Pinus Sylvestris ◽  
Wall Thickness ◽  
Pannonian Basin ◽  
Habitat Type ◽  
Cell Wall Thickness ◽  
Cell Diameter ◽  
Peat Bog ◽  
Eastern Carpathians ◽  
Extreme Habitats

Ecologically extreme habitats at a species’ distribution edges bear significance for biota under adverse climatic conditions and climate change. Range-edge populations adjust their functional traits to the special local ecological conditions, leading to increased intraspecific variability in their morpho-anatomical structure and, consequently, favor population survival in the absence of competitors. On the basis of wood anatomical traits, such as tracheid lumen area (CA), cell wall thickness (CWTrad), cell diameter-to-radial cell wall thickness ratio (CD/CWT), and the number of tracheids in the radial tracheid files (TNo), we investigated the xylem adjustment of Pinus sylvestris L. populations from six ecologically extreme habitats from the Eastern Carpathians and the Pannonian Basin. Results indicated significant differences among all studied sites in case of all wood anatomical traits as signs of the local adaptation of trees. Peat bog populations adapted their wood anatomical traits to the generally hydric, cool and anaerobic conditions of the peat bogs, exhibiting smaller CA and proportionally thick CWTrad to ensure the hydraulic safety of the stem, whereas, on the lowland site, trees were characterized by a more effective water-conducting system, developing larger CA with relatively thin CWTrad with lower carbon-per-conduit-costs at the expense of higher vulnerability to cavitation. Radial tree ring growth and TNo also differed markedly among sites, following the temperature and groundwater constraints of the habitats. Wood anatomical variability among tree rings and the corresponding short-term climate response of populations differed from the adaptive responses of the trees to the ecological characteristics of the habitat. In addition to the different phylogeographic origin evidenced in former studies, phenotypic differentiation by the habitat type of the studied populations linked to the variance in morpho-anatomical traits have contributed to the survival of the peripheral Scots pine populations at the species’ range margins.

Radial Variation of Anatomical Characteristics in Paraserianthes Falcataria Planted in Indonesia

IAWA Journal ◽  
2009 ◽  
Vol 30 (3) ◽  
pp. 343-352 ◽  
Author(s):  
F. Ishiguri ◽  
T. Hiraiwa ◽  
K. Iizuka ◽  
S. Yokota ◽  
D. Priadi ◽  
...  
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Wood Fiber ◽  
Basic Density ◽  
Cell Wall Thickness ◽  
Radial Variation ◽  
Cell Diameter ◽  
Wood Fibers ◽  
Paraserianthes Falcataria ◽  
Anatomical Characteristics

Radial variation in anatomical characteristics of five 13-year-old Paraserianthes falcataria (L.) Nielsen (syn. Albizia falcataria (L.) Fosberg), an important commercial tree species in Indonesia, were investigated in order to obtain basic information regarding breeding for wood quality. Both cell wall thickness in wood fibers and vessel percentage showed an almost constant value up to 10 cm from the pith and then increased toward the bark. In contrast, wood fiber percentage decreased from 10 cm toward the bark. The cell wall percentage was lower towards the pith and higher towards the bark. In the five sample trees, significant differences were found in the cell diameter of wood fibers, wood fiber percentage, axial parenchyma percentage, and cell wall percentage. Basic density was affected by the cell wall thickness of wood fibers, but not the vessel percentage and fiber percentage.

Relationships between anatomical and densitometric characteristics of black spruce and summer temperature at tree line in northern Quebec

2002 ◽  
Vol 32 (3) ◽  
pp. 477-486 ◽  
Author(s):  
Lily Wang ◽  
Serge Payette ◽  
Yves Bégin
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Black Spruce ◽  
Ring Width ◽  
Cell Number ◽  
Summer Temperature ◽  
Cell Wall Thickness ◽  
Cell Diameter ◽  
Ring Cell ◽  
Densitometric Data

Tracheid cell number, cell diameter, and cell-wall thickness of black spruce (Picea mariana (Mill.) BSP) tree rings at the tree line (northern Quebec, Canada) were measured using image analysis. The densitometric data from the same samples were used to evaluate the features of image analysis. The anatomical data were correlated with summer temperature variables, including: means of pentad temperature (five consecutive days), growing season (May- September), sum of degree-days, and number of frost-free days. Our results suggest that the main cause of the pale appearance of light rings is thinner latewood cell-wall thickness. Some latewood variables are strongly correlated with corresponding indices for ring cell number and diameter, and ring cell wall thickness. Anatomical ring cell number and the sum of cell diameters (ring widths) were correlated to tree-ring width parameters derived from densitometry. Ring cell number and annual sum of cell diameter also showed very similar trends with both chronologies, suggesting that ring-width length may depend on the number of cells within a ring. Ratio diagram of double cell-wall thickness to cell radial diameter showed similar trend to wood density profile. There is a statistically significant correlation between maximum density and the highest annual ratio between cell wall thickness and lumen diameter. Cell-wall thickness was significantly correlated to maximum density, and both were significantly correlated with summer temperature variables. Our results suggest that wood anatomy may be used as a substitute to densitometry for climate reconstruction as densitometric data require expensive equipments. Also the anatomical method allows the recording of intra-annual information for dendroecological purposes.

Climate response of cell characteristics in tree rings of Picea crassifolia

Holzforschung ◽  
2013 ◽  
Vol 67 (2) ◽  
pp. 217-225 ◽  
Author(s):  
Jinmei Xu ◽  
Jianxiong Lu ◽  
Fucheng Bao ◽  
Robert Evans ◽  
Geoffrey M. Downes
Keyword(s):  
Cell Wall ◽  
Wood Density ◽  
Tree Rings ◽  
Wall Thickness ◽  
Function Analysis ◽  
Ring Width ◽  
Cell Wall Thickness ◽  
Cell Diameter ◽  
Climate Response ◽  
Picea Crassifolia

Abstract Dimensions of dated tree rings are an important tool of dendroclimatology. However, the relationships between climatic variables and cell diameter and cell wall thickness are not yet clearly elaborated. In the present article, year-to-year cell characteristics, ring width, and wood density of Picea crassifolia trees growing in northwestern China have been measured with high resolution by means of the instrument SilviScan-3. The response function analysis showed that climate explained 51% of the variation of cell radial diameter chronology, 48% of wood density, 40% of cell wall thickness, and 37% of ring width. Cell wall thickness and wood density responded significantly and positively to temperature, and the response to precipitation was negative, while the opposite was true for cell radial diameter and ring width. Cell wall thickness and wood density were pronounced (statistically significant) to temperature in September and precipitation in May and August. Cell radial diameter responded significantly to temperature in June and July, and precipitation, in August. For ring width, the temperature in July was important. Accordingly, cell characteristics are sensitive to climate, and the findings could be useful in the field of dendroclimatology.

Properties of Gliricidia Wood (Gliricidia sepium) lntercropped with Cocoa (Theobroma cocoa) in Malaysia

2014 ◽  
Vol 11 (1) ◽  
pp. 51
Author(s):  
Mohd Helmy Ibrahim ◽  
Mohd Nazip Suratman ◽  
Razali Abd Kader
Keyword(s):  
Cell Wall ◽  
Specific Gravity ◽  
Moisture Content ◽  
Wall Thickness ◽  
Age Groups ◽  
Gliricidia Sepium ◽  
Cell Wall Thickness ◽  
Tree Age ◽  
Lumen Diameter ◽  
Significant Difference

Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia sepium is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G. sepium at three intervals according to age groups ( three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years ofage as compared to five (0.41) and three (0.35) years age group with a mean of 0.43 (p<0.05). Mean moisture content was 58.3% with no significant difference existing between the tree age groups. Fibre diameter (22.4 mm) was significantly lower (p<0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 mm and 24. 7 mm), respectively. Means of fibre length, lumen diameter and cell wall thickness were 0.83 mm, 18.3 mm, and 6.2 mm, respectively, with no significant differences detected between trees in all age groups. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G.sepium may have the potential for insulation board manufacturing and paper making. However, future studies should experiment the utilisation of this species for these products to determine its full potential.

Characterization of microstructures of SAN foam core using micro-computed tomography

2021 ◽  
pp. 026248932110068
Author(s):  
Youming Chen ◽  
Raj Das ◽  
Hui Wang ◽  
Mark Battley
Keyword(s):  
Cell Wall ◽  
Cell Size ◽  
Wall Thickness ◽  
Strain Localization ◽  
Cell Wall Thickness ◽  
Micro Computed Tomography ◽  
Average Cell Size ◽  
Average Cell ◽  
3D Images ◽  
Compressive Tests

In this study, the microstructure of a SAN foam was imaged using a micro-CT scanner. Through image processing and analysis, variations in density, cell wall thickness and cell size in the foam were quantitatively explored. It is found that cells in the foam are not elongated in the thickness (or rise) direction of foam sheets, but rather equiaxed. Cell walls in the foam are significantly straight. Density, cell size and cell wall thickness all vary along the thickness direction of foam sheets. The low density in the vicinity of one face of foam sheets leads to low compressive stiffness and strength, resulting in the strain localization observed in our previous compressive tests. For M80, large open cells on the top face of foam sheets are likely to buckle in compressive tests, therefore being another potential contributor to the strain localization as well. The average cell wall thickness measured from 2D slice images is around 1.4 times that measured from 3D images, and the average cell size measured from 2D slice images is about 13.8% smaller than that measured from 3D images. The dispersions of cell wall thickness measured from 2D slice images are 1.16–1.20 times those measured from 3D images. The dispersions of cell size measured from 2D slice images are 1.12–1.36 times those measured from 3D images.

Summer temperature in northeastern Siberia since 1642 reconstructed from tracheid dimensions and cell numbers of Larix cajanderi

2003 ◽  
Vol 33 (10) ◽  
pp. 1905-1914 ◽  
Author(s):  
Irina P Panyushkina ◽  
Malcolm K Hughes ◽  
Eugene A Vaganov ◽  
Martin AR Munro
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Cell Number ◽  
Cell Wall Thickness ◽  
Cell Dimension ◽  
Cell Numbers ◽  
Age Related ◽  
Cambial Age ◽  
Northeastern Siberia ◽  
Larix Cajanderi

We reconstructed air temperature for two periods in the growth season from cell dimension and cell number variability in cross-dated tree rings of Larix cajanderi Mayr. from northeastern Siberia. Thirteen tree-ring chronologies based on cell size, cell wall thickness, and cell number were developed for AD 1642–1993. No clear evidence was found of an age-related trend in cell dimensions in the sampled materials, but cell numbers were correlated with cambial age. The chronologies contain strong temperature signals associated with the timing of xylem growth. We obtained reliable reconstructions of mean June temperature from the total cell number and July–September temperature from the cell wall thickness of latewood. June temperature and July–September temperature covaried for most of the period from AD 1642 to AD 1978. After that time, June temperature became cooler relative to July–September temperature. This difference caused disproportional changes in earlywood tracheids because of the late start of growth and cool conditions in June followed by warming during the rest of the season. The identification of this unusual recent change has shown that intraseasonal resolution may be achieved by cell dimension and cell number chronologies.

Variation in xylem anatomy of selected populations of lodgepole pine

2001 ◽  
Vol 31 (11) ◽  
pp. 2049-2057 ◽  
Author(s):  
Tongli Wang ◽  
Sally N Aitken
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Slow Growth ◽  
Lodgepole Pine ◽  
High Density ◽  
Cell Wall Thickness ◽  
Fast Growth ◽  
Low Density ◽  
Xylem Anatomy ◽  
Latewood Density

Variation in xylem anatomy among selected populations of lodgepole pine (Pinus contorta Dougl. ex Loud. var. latifolia Engelm.) was examined using digital image analysis based on an annual growth ring (age 10) per tree. Four subpopulations were selected using the following criteria for height growth and wood density: (i) fast growth and high density; (ii) slow growth and high density; (iii) fast growth and low density; and (iv) slow growth and low density. Significant differences were found among subpopulations for several anatomical parameters including tracheid density, lumen size, and cell wall thickness that may affect the economic value and utilization of wood. Principal component analysis indicate that the first four principal components (PCs) were associated with (i) ring area (PC1), (ii) earlywood density (PC2), (iii) latewood density (PC3), and (iv) lumen shape in earlywood (PC4), suggesting that these aspects of wood properties and growth are controlled by different sets of genes. Relative contributions of total number of tracheids, tracheid lumen size, and cell wall thickness to ring area and correlations between cell wall area proportion and X-ray density are discussed.

Sign in / Sign up

Export Citation Format

Share Document