scholarly journals Assessment on Bonding Potentials of Trackless Tack under a Thin Overlay

2021 ◽  
Vol 6 (9) ◽  
pp. 126
Author(s):  
Ah Young Seo ◽  
Maryam S. Sakhaeifar ◽  
Bryan T. Wilson
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Critical Role ◽  
Shear Resistance ◽  
Marginal Effect ◽  
Bond Performance ◽  
Several Variables ◽  
Interlayer Shear ◽  
Bonding Characteristics

Trackless tacks are used to minimize the loss of tack materials caused by adherence to moving tires. During the last two decades, the paving industry and highway agencies have had an increasing interest in the use of trackless tacks to ensure an adequate bond between the overlay and the existing pavement. Therefore, the need for more studies on the bonding characteristics of various trackless tacks is growing. The purpose of this study is to measure the bonding potential of trackless tacks and identify several variables that affect the shear resistance in terms of bonding strength and energy using statistical analysis. The improvement of interlayer shear resistance by tack treatment is different depending on the tack and surface types. Higher tack reactivation temperatures increase the interlayer shear resistance. Compaction effort is considered to have only a marginal effect on bond performance. Tack and surface types play a more critical role in determining the shear bond strength than residual tack rate in the field experiment.

scholarly journals To Evaluate Shear Bond Strength of Resin Composite to Theracal Lc, Biodentine, and Resin–Modified Glass Ionomer Cement and Mode of Fracture: An In Vitro Study

2020 ◽  
Vol 8 (02) ◽  
pp. 49-54
Author(s):  
Salil Mehra ◽  
Ashu K. Gupta ◽  
Bhanu Pratap Singh ◽  
Mandeep Kaur ◽  
Ashwath Kumar
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Bonding Agent ◽  
Glass Ionomer ◽  
Universal Adhesive ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

Abstract Introduction The aim of the current study was to evaluate shear bond strength of resin composite bonded to Theracal LC, Biodentine, and resin-modified glass ionomer cement (RMGIC) using universal adhesive and mode of fracture. Materials and Methods A total of 50 caries-free maxillary and mandibular molars extracted were taken; occlusal cavities were prepared, mounted in acrylic blocks, and divided into five groups based on the liner used. Group 1: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 12 minutes. Group 2: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 14 days. Group 3: RMGIC liner placed into the cavity and bonding agent and resin composite applied immediately. Group 4: RMGIC liner placed into the cavity and bonding agent and resin composite applied after 7 days. Group 5: Theracal LC liner placed into the cavity and bonding agent and resin composite applied immediately. Each sample was bonded to resin composite using universal adhesive. Shear bond strength analysis was performed at a cross-head speed of 0.1 mm/min. Statistical Analysis  Statistical analysis was performed with one-way analysis of variance and posthoc Bonferroni test using SPSS version 22.0. Results and Conclusion Biodentine liner when bonded immediately to resin composite showed minimum shear bond strength. RMGIC when bonded to resin composite after 7 days showed maximum shear bond strength. Mode of fracture was predominantly cohesive in groups having Biodentine and Theracal LC as liner.

scholarly journals Shear bond strength of orthodontic brackets to enamel after application of a caries infiltrant

2014 ◽  
Vol 85 (4) ◽  
pp. 645-650 ◽  
Author(s):  
Laura Mews ◽  
Matthias Kern ◽  
Robert Ciesielski ◽  
Helge Fischer-Brandies ◽  
Bernd Koos
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Force ◽  
Shear Bond Strength ◽  
Orthodontic Brackets ◽  
Enamel Defects ◽  
Adhesive Remnant Index ◽  
Demineralized Enamel ◽  
Kolmogorov Smirnov ◽  
Bond Strengths

ABSTRACT Objective:  To examine differences in the shear bond strength of orthodontic brackets on differently mineralized enamel surfaces after applying a caries infiltrant or conventional adhesive. Materials and Methods:  A total of 320 bovine incisors were assigned to eight pretreated groups, and the shear force required for debonding was recorded. Residual adhesive was evaluated by light microscopy using the adhesive remnant index. Statistical analysis included Kolmogorov-Smirnov, analysis of variance (ANOVA), and Scheffé tests. Results:  The highest bond strength (18.8 ± 4.4 MPa) was obtained after use of the caries infiltrant. More residual adhesive and fewer enamel defects were observed on infiltrated enamel surfaces. Brackets on demineralized enamel produced multiple enamel defects. Conclusions:  Acceptable bond strengths were obtained with all material combinations. A caries-infiltrant applied before bracket fixation has a protective effect, especially on demineralized enamel.

scholarly journals Use of Flowable Composites for Orthodontic Bracket Bonding

2008 ◽  
Vol 78 (6) ◽  
pp. 1105-1109 ◽  
Author(s):  
Dong-Bum Ryou ◽  
Hyo-Sang Park ◽  
Kyo-Han Kim ◽  
Tae-Yub Kwon
Keyword(s):  
Flexural Strength ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Orthodontic Bracket ◽  
Bonding System ◽  
Adhesive Remnant Index ◽  
Human Enamel ◽  
Orthodontic Bonding ◽  
Flowable Composites ◽  
Bonding Characteristics

Abstract Objective: To test the bonding characteristics of four flowable composites for orthodontic bracket bonding. Materials and Methods: Metal brackets were bonded to acid-etched human enamel using four flowable composites (Grandio Flow, GF; UniFil Flow, UF; UniFil LoFlo Plus, UL; and DenFil Flow, DF), an orthodontic bonding system (Transbond XT, TX), and a restorative composite (Filtek Z250, FZ). After 24 hours of storage in water at 37°C, a shear bond strength (SBS) test was performed. After debonding, the adhesive remnant index (ARI) was assessed. In addition, the flow and flexural strength of the materials were examined. Results: The SBS for the flowable composites ranged between 7.2 and 8.3 MPa, and TX showed a significantly higher value (mean 10.9 MPa). The flowable composites also demonstrated a significantly superior flowability, yet inferior flexural strength (except for DF) than TX and FZ. Two flowable composites (GF and UL) produced significantly higher ARI scores than TX and FZ, which represented a larger resin remnant on the enamel surfaces after debonding. Conclusion: When considering the SBS and ARI scores obtained in this study, flowable composites with no intermediate bonding resin could be conveniently applied for orthodontic bracket bonding.

scholarly journals An Evaluation of Shear Bond Strength of Self-Etch Adhesive on Pre-etched Enamel: An in vitro Study

2013 ◽  
Vol 14 (6) ◽  
pp. 1036-1038
Author(s):  
Abdul Mujeeb ◽  
Bhadra Rao ◽  
Satti Narayana Reddy ◽  
Kanchan Mehta ◽  
G Saritha
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Occlusal Surfaces ◽  
Group 3 ◽  
The Mean ◽  
Group 2 ◽  
Self Etch ◽  
Group 1

ABSTRACT Aim To determine the shear bond strength of self-etch adhesive G-bond on pre-etched enamel. Materials and methods Thirty caries free human mandibular premolars extracted for orthodontic purpose were used for the study. Occlusal surfaces of all the teeth were flattened with diamond bur and a silicon carbide paper was used for surface smoothening. The thirty samples were randomly grouped into three groups. Three different etch systems were used for the composite build up: group 1 (G-bond self-etch adhesive system), group 2 (G-bond) and group 3 (Adper single bond). Light cured was applied for 10 seconds with a LED unit for composite buildup on the occlusal surface of each tooth with 8 millimeters (mm) in diameter and 3 mm in thickness. The specimens in each group were tested in shear mode using a knife-edge testing apparatus in a universal testing machine across head speed of 1 mm/ minute. Shear bond strength values in Mpa were calculated from the peak load at failure divided by the specimen surface area. The mean shear bond strength of all the groups were calculated and statistical analysis was carried out using one-way Analysis of Variance (ANOVA). Results The mean bond strength of group 1 is 15.5 Mpa, group 2 is 19.5 Mpa and group 3 is 20.1 Mpa. Statistical analysis was carried out between the groups using one-way ANOVA. Group 1 showed statistically significant lower bond strength when compared to groups 2 and 3. No statistical significant difference between groups 2 and 3 (p < 0.05). Conclusion Self-etch adhesive G-bond showed increase in shear bond strength on pre-etched enamel. How to cite this article Rao B, Reddy SN, Mujeeb A, Mehta K, Saritha G. An Evaluation of Shear Bond Strength of Self-Etch Adhesive on Pre-etched Enamel: An In vitro Study. J Contemp Dent Pract 2013;14(6):1036-1038.

scholarly journals Reconditioning of self-ligating brackets

2011 ◽  
Vol 82 (1) ◽  
pp. 158-164 ◽  
Author(s):  
Maria Francesca Sfondrini ◽  
Esmeralda Xheka ◽  
Andrea Scribante ◽  
Paola Gandini ◽  
Giuseppe Sfondrini
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Null Hypothesis ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Shear Mode ◽  
Universal Testing ◽  
Adhesive Remnant Index ◽  
Significant Difference ◽  
Scanning Electron

Abstract Objective: To test the null hypothesis that there is no significant difference in the shear bond strength (SBS) and Adhesive Remnant Index (ARI) scores of new vs reconditioned self-ligating brackets. Materials and Methods: One hundred and twenty permanent extracted bovine teeth were embedded in resin blocks. Three different new and reconditioned self-ligating orthodontic brackets (Smart Clip [3M Unitek]; Quick [Forestadent]; and Damon3MX [Ormco]) were tested. Scanning electron microphotographs of the different new (groups 1, 3, and 5) and reconditioned (groups 2, 4, and 6) bracket bases were taken before starting the experiments. Brackets were then bonded to the teeth using an orthodontic adhesive and were then tested in shear mode using an Instron Universal Testing Machine. ARI scores were then recorded. Statistical analysis was performed to determine significant differences in SBS and ARI Scores. Results: Smart Clip and Damon3MX reconditioned brackets showed significantly lower SBS than did new ones. On the contrary, Quick reconditioned brackets showed significantly higher SBS than did new ones. No significant differences in ARI scores were found after the reconditioning process for the three different brackets tested. Conclusion: The in-office reconditioning procedure alters the SBS of self-ligating brackets, although SBS values still remain clinically acceptable.

Comparative assessment of the interlayer shear-bond strength of geogrid reinforcements in hot-mix asphalt

2018 ◽  
Vol 191 ◽  
pp. 726-735 ◽  
Author(s):  
Lubinda F. Walubita ◽  
Tito P. Nyamuhokya ◽  
Julius J. Komba ◽  
Hossain Ahmed Tanvir ◽  
Mena I. Souliman ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Hot Mix Asphalt ◽  
Comparative Assessment ◽  
Interlayer Shear

scholarly journals The Influence of No-Primer Adhesives and Anchor Pylons Bracket Bases on Shear Bond Strength of Orthodontic Brackets

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Andrea Scribante ◽  
Maria Francesca Sfondrini ◽  
Danilo Fraticelli ◽  
Paola Daina ◽  
Alessandra Tamagnone ◽  
...  
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Universal Testing Machine ◽  
Universal Testing ◽  
Adhesive Remnant Index ◽  
Chi Squared ◽  
Mandibular Incisors

Objective. The aim of this study was to compare the shear bond strength (SBS) and adhesive remnant index (ARI) scores of no-primer adhesives tested with two different bracket bases.Materials and Methods. 120 bovine permanent mandibular incisors were divided into 6 groups of 20 specimens. Two brackets (ODP) with different bracket bases (anchor pylons and 80-gauge mesh) were bonded to the teeth using a conventional adhesive (Transbond XT) and two different no-primer adhesive (Ortho Cem; Heliosit) systems. Groups were tested using an instron universal testing machine. SBS values were recorded. ARI scores were measured. SEM microphotographs were taken to evaluate the pattern of bracket bases. Statistical analysis was performed. ANOVA and Tukey tests were carried out for SBS values, whereas a chi-squared test was applied for ARI scores.Results. Highest bond strength values were reported with Transbond XT (with both pad designs), Ortho Cem bonded on anchor pylons and Heliosit on 80-gauge mesh. A higher frequency of ARI score of “3” was reported for Transbond XT groups. Other groups showed a higher frequency of ARI score “2” and “1.”Conclusion. Transbond XT showed the highest shear bond strength values with both pad designs.

scholarly journals Etching Patterns of Self-Etching Primers in Relation to Shear Bond Strength on Unground Enamel Samples

2021 ◽  
Vol 9 (11) ◽  
pp. 138
Author(s):  
Lorenz Brauchli ◽  
Markus Steineck
Keyword(s):  
Electron Microscopy ◽  
Shear Strength ◽  
Statistical Analysis ◽  
Bond Strength ◽  
Correlation Coefficient ◽  
Shear Bond Strength ◽  
Strength Testing ◽  
Post Test ◽  
Bond Strengths

It was the intention of the study to evaluate the etching effects of several self-etching primers on unground enamel and their relevance for shear bond strength testing. Seven self-etching primers (Clearfil SE, Futurabond NR, M-Bond, One Coat, Optibond, Transbond SEP+, Xeno III) and a conventional 35% phosphoric gel acid were applied to bovine incisors according to the manufacturer’s instructions. All specimens were analyzed by electron microscopy. A visual four-step grading was used for the characterization of the macroscopic (5000×) and microscopic (20,000×) etching patterns. In addition, shear bond strength for all the products was tested with an Instron 3344 after 1000 thermocycles between 5 °C and 55 °C. Statistical analysis was carried out using Kruskal–Wallis with Dunn’s post-test and Pearson’s correlation coefficient. Very strong etching patterns with well-defined prisms were found for the conventional etching, Transbond SEP+, and to a lesser degree, for Xeno III. Clearfil SE and Futurabond NR revealed moderate etching patterns, and M-Bond, One Coat, and Optibond revealed very weak etching patterns. The bond strength correlated well with the etching patterns. The highest shear strength was obtained with conventional etching and Transbond SEP+, followed by Clearfil SE. Moderate shear bond strengths were found for Xeno III, Futurabond NR, One Coat, and M-Bond, and the lowest were found with Optibond.

Sign in / Sign up

Export Citation Format

Share Document