scholarly journals Multiple TLDs on Motion Reduction Control of the Offshore Wind Turbines

2020 ◽  
Vol 8 (6) ◽  
pp. 470
Author(s):  
Po-Hung Yeh ◽  
Shao-Hua Chung ◽  
Bang-Fuh Chen
Keyword(s):  
Environmental Conditions ◽  
Wind Wave ◽  
Wind Waves ◽  
Single Layer ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wind Field Simulation ◽  
Tuned Liquid Dampers ◽  
Seismic Force ◽  
Damping Effects

This study explores the damping effects of tuned liquid dampers (TLDs) on a monopile offshore wind turbine (OWT). The fluid–solid coupling of ANSYS was used to simulate the damping effect of a TLD on the structures. The environmental conditions refer to the IEC-61400-3 and the Design Load Case (DLC) 1.2 for the annual average environmental conditions and DLC 6.2 for the 50-year regression period, and the extreme environmental conditions were used in the study. The turbulent wind field simulation was performed by TurbSim, and the load of wind waves on structures was generated by FAST, which were all developed by the NREL (National Renewable Energy Laboratory). In addition to wind and waves, the seismic force was also considered. The cylindrical TLD was located above the rotor nacelle assembly (RNA). A TLD has different damping effects when acting under wind, wave, and earthquake loads, respectively. The effect of the TLD regarding motion reduction on the OWT under coupled wind, wave, and seismic loads was studied. This study also designed a simple experiment to verify the correctness of the numerical simulation results. Fatigue analysis shows that multi-layer TLDs can extend the fatigue life (37%) of an OWT. In addition, under extreme environmental load conditions, multi-layer TLDs have a better vibration damping performance than single-layer TLDs. The study demonstrates that multi-layer TLDs can be considered as a vibration reduction damper for OWTs.

Simulation of Wind, Waves, and Currents During Hurricane Sandy for Planned Assessment of Offshore Wind Turbines

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Eungsoo Kim ◽  
Lance Manuel
Keyword(s):  
Wind Turbines ◽  
Wind Wave ◽  
Wind Waves ◽  
Intensity Variation ◽  
Hurricane Sandy ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wind Fields ◽  
Offshore Wind Turbines ◽  
Waves And Currents

The simulation of wind and wave fields for the evaluation of jacket-supported offshore wind turbines during Hurricane Sandy of 2012 is the focus of this study. For realistic load assessment of offshore wind turbines, it is important that coupled wind, wave, and current fields with appropriate spatial resolution are provided throughout the evolution of the hurricane. A numerical model describing the hurricane track and intensity variation with time is used to generate the coupled wind, wave, and current fields. Time series of turbulent wind fields and coupled wave kinematics are generated using the hurricane simulation output, and a detailed procedure is presented. These coupled wind, wave, and current fields form the inputs for the analysis of a 5-MW offshore wind turbine supported on a jacket platform sited in 50 m of water and assumed located in the path of Hurricane Sandy. The turbine’s and support structure’s performance under the simulated loading conditions is the subject of a separate study.

On the Simulation of Wind, Waves and Currents During Hurricane Sandy for Assessing the Performance of Jacket-Supported Offshore Wind Turbines

2016 ◽  
Author(s):  
E. Kim ◽  
L. Manuel
Keyword(s):  
Wind Turbines ◽  
Wind Wave ◽  
Wind Waves ◽  
Intensity Variation ◽  
Companion Paper ◽  
Hurricane Sandy ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wind Fields ◽  
Offshore Wind Turbines

The simulation of wind and wave fields for the evaluation of jacket-supported offshore wind turbines during Hurricane Sandy of 2012 is the focus of this study. For realistic load assessment of offshore wind turbines, it is important that coupled wind, wave, and current fields appropriately resolved spatially are provided throughout the evolution of the hurricane. A numerical model describing the hurricane track and intensity variation with time is used to generate the coupled wind, wave, and current fields. Time series of turbulent wind fields and coupled wave kinematics are generated using the hurricane simulation output and a detail procedure is presented. These coupled wind, wave, and current fields form the inputs for the analysis of a 5-MW offshore wind turbine supported on a jacket platform sited in 50 meters of water and assumed located in the path of Hurricane Sandy. The turbine’s and support structure’s performance under the simulated loading conditions is the subject of a companion paper.

scholarly journals Unsupervised Damage Detection for Offshore Jacket Wind Turbine Foundations Based on an Autoencoder Neural Network

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3333
Author(s):  
Maria del Cisne Feijóo ◽  
Yovana Zambrano ◽  
Yolanda Vidal ◽  
Christian Tutivén
Keyword(s):  
Neural Network ◽  
Wind Turbine ◽  
Environmental Conditions ◽  
Wind Farms ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Small Subset ◽  
Scaled Model ◽  
Vibration Data ◽  
Large Water

Structural health monitoring for offshore wind turbine foundations is paramount to the further development of offshore fixed wind farms. At present time there are a limited number of foundation designs, the jacket type being the preferred one in large water depths. In this work, a jacket-type foundation damage diagnosis strategy is stated. Normally, most or all the available data are of regular operation, thus methods that focus on the data leading to failures end up using only a small subset of the available data. Furthermore, when there is no historical precedent of a type of fault, those methods cannot be used. In addition, offshore wind turbines work under a wide variety of environmental conditions and regions of operation involving unknown input excitation given by the wind and waves. Taking into account the aforementioned difficulties, the stated strategy in this work is based on an autoencoder neural network model and its contribution is two-fold: (i) the proposed strategy is based only on healthy data, and (ii) it works under different operating and environmental conditions based only on the output vibration data gathered by accelerometer sensors. The proposed strategy has been tested through experimental laboratory tests on a scaled model.

Model Test and Numerical Analysis of an Offshore Bottom Fixed Pentapod Wind Turbine Under Seismic Loads

2016 ◽  
Author(s):  
Wenhua Wang ◽  
Zhen Gao ◽  
Xin Li ◽  
Torgeir Moan ◽  
Bin Wang
Keyword(s):  
Wind Turbine ◽  
Wind Wave ◽  
Seismic Analysis ◽  
Wind Farms ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Structural Dynamic ◽  
Load Conditions

In the last decade the wind energy industry has developed rapidly in China, especially offshore. For a water depth less than 20m, monopile and multi-pile substructures (tripod, pentapod) are applied widely in offshore wind farms. Some wind farms in China are located in high seismicity regions, thus, the earthquake load may become the dominant load for offshore wind turbines. This paper deals with the seismic behavior of an offshore wind turbine (OWT) consisting of the NREL 5MW baseline wind turbine, a pentapod substructure and a pile foundation of a real offshore wind turbine in China. A test model of the OWT is designed based on the hydro-elastic similarity. Test cases of different load combinations are performed with the environmental conditions generated by the Joint Earthquake, Wave and Current Simulation System and the Simple Wind Field Generation System at Dalian University of Technology, China, in order to investigate the structural dynamic responses under different load conditions. In the tests, a circular disk is used to model the rotor-nacelle system, and a force gauge is fixed at the center of the disk to measure the wind forces during the tests. A series of accelerometers are arranged along the model tower and the pentapod piles, and strain gauges glued on the substructure members are intended to measure the structural dynamic responses. A finite element model of the complete wind turbine is also established in order to compare the theoretical results with the test data. The hydro-elastic similarity is validated based on the comparison of the measured dynamic characteristics and the results of the prototype modal analysis. The numerical results agree well with the experimental data. Based on the comparisons of the results, the effect of the wind and sea loads on the structural responses subjected to seismic is demonstrated, especially the influence on the global response of the structure. It is seen that the effect of the combined seismic, wind, wave and current load conditions can not be simply superimposed. Hence the interaction effect in the seismic analysis should be considered when the wind, wave and current loads have a non-negligible effect.

Evaluating the Coupledness of the Aerodynamics and Hydrodynamics on the Estimation of Fatigue Damage Equivalent Load for a Floating Offshore Wind Platform

2018 ◽  
Author(s):  
Samuel Kanner ◽  
Bingbin Yu
Keyword(s):  
Fatigue Life ◽  
Fatigue Damage ◽  
Environmental Conditions ◽  
Offshore Wind ◽  
Coupled Analysis ◽  
Offshore Wind Turbine ◽  
Wave Conditions ◽  
Equivalent Load ◽  
The Waves

In this research, the estimation of the fatigue life of a semi-submersible floating offshore wind platform is considered. In order to accurately estimate the fatigue life of a platform, coupled aerodynamic-hydrodynamic simulations are performed to obtain dynamic stress values. The simulations are performed at a multitude of representative environmental states, or “bins,” which can mimic the conditions the structure may endure at a given site, per ABS Floating Offshore Wind Turbine Installation guidelines. To accurately represent the variety of wind and wave conditions, the number of environmental states can be of the order of 103. Unlike other offshore structures, both the wind and wave conditions must be accounted for, which are generally considered independent parameters, drastically increasing the number of states. The stress timeseries from these simulations can be used to estimate the damage at a particular location on the structure by using commonly accepted methods, such as the rainflow counting algorithm. The damage due to either the winds or the waves can be estimated by using a frequency decomposition of the stress timeseries. In this paper, a similar decoupled approach is used to attempt to recover the damages induced from these coupled simulations. Although it is well-known that a coupled, aero-hydro analysis is necessary in order to accurately simulate the nonlinear rigid-body motions of the platform, it is less clear if the same statement could be made about the fatigue properties of the platform. In one approach, the fatigue damage equivalent load is calculated independently from both scatter diagrams of the waves and a rose diagram of the wind. De-coupled simulations are performed to estimate the response at an all-encompassing range of environmental conditions. A database of responses based on these environmental conditions is constructed. The likelihood of occurrence at a case-study site is used to compare the damage equivalent from the coupled simulations. The OC5 platform in the Borssele wind farm zone is used as a case-study and the damage equivalent load from the de-coupled methods are compared to those from the coupled analysis in order to assess these methodologies.

Dynamic Analysis of a Floating Offshore Wind Turbine Under Extreme Environmental Conditions

2012 ◽  
Author(s):  
Tomoaki Utsunomiya ◽  
Shigeo Yoshida ◽  
Hiroshi Ookubo ◽  
Iku Sato ◽  
Shigesuke Ishida
Keyword(s):  
Dynamic Analysis ◽  
Wind Turbine ◽  
Environmental Conditions ◽  
Aerodynamic Force ◽  
Experimental Results ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Analysis Tool ◽  
Simulation Code ◽  
Floating Offshore Wind Turbine

This paper is concerned with the development of a Floating Offshore Wind Turbine (FOWT) utilizing spar-type floating foundation. In order to design such a structure, it is essential to evaluate the dynamic response under extreme environmental conditions. In this study, therefore, a dynamic analysis tool has been developed. The dynamic analysis tool consists of a multi-body dynamics solver (MSC.Adams), aerodynamic force evaluation library (NREL/AeroDyn), hydrodynamic force evaluation library (In-house program named SparDyn), and mooring force evaluation library (In-house program named Moorsys). In this paper, some details of the developed dynamic analysis tool are given. In order to validate the program, comparison with the experimental results, where the wind, current and wave are applied simultaneously, has been made. The comparison shows that satisfactory agreements between the simulation and the experimental results are obtained. However, when VIM (Vortex Induced Motion) occurs, the current loads and cross flow responses (sway and roll) are underestimated by the simulation since the simulation code does not account for the effect of VIM.

scholarly journals Safety Evaluation of the Combined Load for Offshore Wind Turbine Suction Foundation Installed on Sandy Soil

2021 ◽  
Vol 33 (5) ◽  
pp. 195-202
Author(s):  
Jeong Seon Park
Keyword(s):  
Wind Turbine ◽  
Sandy Soil ◽  
Wind Waves ◽  
Safety Evaluation ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Element Analysis ◽  
Combined Load ◽  
Combined Loads ◽  
Moment Load

Offshore wind turbine (OWT) receive a combined vertical-horizontal- moment load by wind, waves, and the structure’s own weight. In this study, the bearing capacity for the combined load of the suction foundation of OWT installed on the sandy soil was calculated by finite element analysis. In addition, the stress state of the soil around the suction foundation was analyzed in detail under the condition that a combined load was applied. Based on the results of the analyses, new equations are proposed to calculate the horizontal and moment bearing capacities as well as to define the capacity envelopes under general combined loads.

Global Responses and Loads Analysis of a 750-kW Semi-Submersible Floating Offshore Wind Turbine Under Extreme Environmental Conditions

2019 ◽  
Author(s):  
Thanh Dam Pham ◽  
Junbae Kim ◽  
Byoungcheon Seo ◽  
Rupesh Kumar ◽  
Youngjae Yu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Environmental Conditions ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
East Sea ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Scaled Model ◽  
Floating Offshore Wind Turbine ◽  
Extreme Loads

Abstract A pilot floating offshore wind turbine project of Korea was proposed for installing in the East Sea of Korea. The prototype is a semisubmersible platform supporting a 750-kW wind turbine. A scaled model was tested in the basin tank of the University of Ulsan at scale ratio 1:40. The 750-kW floating offshore wind turbine was modeled by using the NREL-FAST code. Numerical results were validated by comparing with those of the test model. This paper analyzes dynamic responses and loads of the wind turbine system under extreme environmental conditions. Extreme environmental conditions based on metocean data of East Sea Korea. Extreme responses and extreme loads are important data for designing the structure of the 750 kW semi-submersible floating offshore wind turbine.

Sign in / Sign up

Export Citation Format

Share Document