scholarly journals Decision Making in Power Distribution System Reconfiguration by Blended Biased and Unbiased Weightage Method

2019 ◽  
Vol 8 (2) ◽  
pp. 20 ◽  
Author(s):  
Kamble ◽  
Vadirajacharya ◽  
Patil
Keyword(s):  
Decision Making ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Voltage Drop ◽  
Multiple Attribute Decision Making ◽  
Power Distribution System ◽  
Reliability Indices ◽  
Weighted Sum Method ◽  
Multiple Attribute

The term smart grid (SG) has been used by many government bodies and researchers to refer to the new trend in the power industry of modernizing and automating the existing power system. SGs must utilize assets optimally by making use of the information, like equipment capacity, voltage drop, radial network structure, minimizing investment and operating costs, minimizing energy loss and reliability indices, and so on. One way to achieve this is to re-route or reconfigure distribution systems (DSs). Distribution systems are reconfigured to choose a switching combination of branches of the system that optimize certain performance parameters of the power supply, while satisfying some specified constraints. In this paper, a blended biased and unbiased weightage (BBUW) multiple attribute decision-making (MADM) method is proposed for finding the compromised best configuration and compared it with other decision-making methods, such as the weighted sum method (WSM), weighted product method (WPM), and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method. The BBUW method is implemented for two distribution systems, and the result obtained shows a good co-relationship between BBUW and other decision-making methods. Further weights obtained from the BBUW method are used for the WSM, WPM and TOPSIS methods for decision making. Examples of the distribution system are worked out in this paper to demonstrate the validity and effectiveness of the method.

scholarly journals A Composite Reliability Index for Power Distribution System in Renewable Microgrid Penetrated Energy Market

2019 ◽  
Vol 8 (2S7) ◽  
pp. 334-338 ◽  
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Reliability Index ◽  
Distribution Systems ◽  
Principal Component ◽  
Assessment Process ◽  
Power Distribution System ◽  
Reliability Indices ◽  
Z Scores ◽  
Composite Reliability

High penetration of renewable micro-grids in power distribution system has given rise to unique reliability issues owing to their intermittent nature. Moreover, individual reliability indices of power distribution systems tend to present conflicting results. Therefore, a single index to quantify the overall reliability of substations is necessary. In essence, this work proposes a Composite Reliability Index (CRI) for renewable penetrated Indian power distribution system. In this work, reliability indices are normalized using Z-scores, followed by Principal Component Analysis (PCA) for weight decision. Particularly, indices recommended in IEEE Std 1366-2003 and practiced by Indian utilities in real-time are studied. Finally, results of test-systems data analysis show that proposed CRI can expedite the reliability assessment process in multiple permutations of systems and operational choices.

scholarly journals Evaluating Critical Factors Influencing the Reliability of Emergency Logistics Systems Using Multiple-Attribute Decision Making

Symmetry ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1115 ◽  
Author(s):  
Peng Jiang ◽  
Yixin Wang ◽  
Chao Liu ◽  
Yi-Chung Hu ◽  
Jingci Xie
Keyword(s):  
Decision Making ◽  
Distribution System ◽  
Multiple Attribute Decision Making ◽  
Supply System ◽  
Critical Factors ◽  
Logistics System ◽  
Factors Influencing ◽  
Emergency Logistics ◽  
Multiple Attribute ◽  
Coordination System

The infectious disease COVID-19 has swept across the world in 2020, and it continues to cause massive losses of life and severe economic problems in all countries. Providing emergency supplies such as protective medical equipment and materials required to secure people’s livelihood is thus currently prioritized by governments. Establishing a reliable emergency logistics system is critical in this regard. This paper used the Delphi method to design a formal decision structure to assess emergency logistics system reliability (ELSR) by obtaining a consensus from a panel of experts. Assessing ELSR is a typical multiple-attribute decision making (MADM) problem, and the related MADM methods are usually on the basis of symmetry principles. A hybrid MADM model, called the Decision Making Trial and Evaluation Laboratory (DEMATEL)-based Analytical Network Process (D-ANP), was developed to identify the critical factors influencing ELSR. An analysis of empirical evidence showed that the emergency logistics command and coordination system and the emergency material supply system play important roles in ELSR, while the emergency logistics transportation and distribution system and the emergency information system are not so important. This conclusion is different from previous research about traditional disaster emergency logistics. Moreover, the cause–effect relationships among the key factors indicated that the system of command and coordination for emergency logistics and the supply system for emergency materials should be improved. Accordingly, effective suggestions for emergency logistics services for epidemic prevention are provided in this paper. The main contributions of this paper are (1) establishing a comprehensive and systematic evaluating index of ELSR for epidemic prevention; (2) employing a kind of structured, namely D-ANP, to identify the critical factors with non-commensurable and conflicting (competing) characteristics; and (3) comparing the differences of reliable criteria between the emergency logistics of epidemic prevention and the traditional disaster emergency logistics.

scholarly journals Complete power distribution system representation and state determination for fault location

DYNA ◽  
2015 ◽  
Vol 82 (192) ◽  
pp. 141-149 ◽  
Author(s):  
Andres Felipe Panesso-Hernández ◽  
Juan Mora-Flórez ◽  
Sandra Pérez-Londoño
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Fault Location ◽  
Estimation Error ◽  
Distance Estimation ◽  
Power Distribution Systems ◽  
Line Load ◽  
Power Distribution System ◽  
Line Section

<p>The impedance-based approaches for fault location in power distribution systems determine a faulted line section. Next, these require of the estimation of the voltages and currents at one or both section line ends to exactly determine the fault location. It is a challenge because in most of the power distribution systems, measurements are only available at the main substation.  This document presents a modeling proposal of the power distribution system and an easy implementation method to estimate the voltages and currents at the faulted line section, using the measurements at the main substation, the line, load, transformer parameters and other serial and shunt connected devices and the power system topology. The approach here proposed is tested using a fault locator based on superimposed components, where the distance estimation error is lower than 1.5% in all of the cases. </p>

scholarly journals Active Reduction of Short-Circuit Current in Power Distribution Systems

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 334
Author(s):  
Esteban Pulido ◽  
Luis Morán ◽  
Felipe Villarroel ◽  
José Silva
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Short Circuit ◽  
Circuit Breaker ◽  
Short Circuit Current ◽  
Power Converter ◽  
Power Distribution Systems ◽  
Power Distribution System ◽  
In Series

In this paper, a new concept of short-circuit current (SCC) reduction for power distribution systems is presented and analyzed. Conventional fault current limiters (FCLs) are connected in series with a circuit breaker (CB) that is required to limit the short-circuit current. Instead, the proposed scheme consisted of the parallel connection of a current-controlled power converter to the same bus intended to reduce the amplitude of the short-circuit current. This power converter was controlled to absorb a percentage of the short-circuit current from the bus to reduce the amplitude of the short-circuit current. The proposed active short-circuit current reduction scheme was implemented with a cascaded H-bridge power converter and tested by simulation in a 13.2 kV industrial power distribution system for three-phase faults, showing the effectiveness of the short-circuit current attenuation in reducing the maximum current requirement in all circuit breakers connected to the same bus. The paper also presents the design characteristics of the power converter and its associated control scheme.

scholarly journals Flexibility Enhancement in an Islanded Distribution Power System by Online Demand-Side Management

2019 ◽  
Vol 217 ◽  
pp. 01020 ◽  
Author(s):  
Margarita Chulyukova ◽  
Nikolai Voropai
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Load Shedding ◽  
Load Management ◽  
Daily Maximum ◽  
Power Distribution Systems ◽  
Power Distribution System ◽  
Islanded Operation

The paper considers the possibilities of increasing the flexibility of power distribution systems by real-time load management. The principles of the implementation of special automatic systems for this purpose are proposed. These systems enable some loads of specific consumers of the power distribution system switched to islanded operation to “shift” from the daily maximum to the minimum, which makes some generators available to connect certain essential consumers disconnected earlier by under-frequency load shedding system to the power system. The approach under consideration is illustrated by a power system with distributed generation.

scholarly journals Islanding Detection in Rural Distribution Systems

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5503
Author(s):  
Wen Fan ◽  
Ning Kang ◽  
Robert Hebner ◽  
Xianyong Feng
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Islanding Detection ◽  
Distribution Grid ◽  
Power Distribution System ◽  
University Of Texas ◽  
Intelligent Sensors ◽  
Detection Approach ◽  
The University

This paper summarizes the literature on detection of islanding resulting from distributed generating capabilities in a power distribution system, with emphasis on the rural distribution systems. It is important to understand the legacy technology and equipment in the rural distribution electrical environment due to the growth of power electronics and the potential for adding the new generations of intelligent sensors. The survey identified four areas needing further research: 1. Robustness in the presence of distribution grid disturbances; 2. the future role of artificial intelligence in the islanding application; 3. more realistic standard tests for the emerging electrical environment; 4. smarter sensors. In addition, this paper presents a synchro-phasor-based islanding detection approach based on a wireless sensor network developed by the University of Texas at Austin. Initial test results in a control hardware-in-the-loop (CHIL) simulation environment suggest the effectiveness of the developed method.

Shunt Petersen-Coil with Resistor for Single Phase Fault Detection in Resonant Grounded Power Distribution Systems

2013 ◽  
Vol 860-863 ◽  
pp. 2007-2012 ◽  
Author(s):  
Xiao Meng ◽  
Neng Ling Tai ◽  
Yan Hu ◽  
Xia Yang
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Single Phase ◽  
Detection Sensitivity ◽  
Power Distribution Systems ◽  
Power Distribution System ◽  
Multi Level ◽  
The Difference ◽  
Petersen Coil

The failure current in resonant grounder power distribution system is small, so it is difficult to detect the fault feeder. This passage presents the equivalent circuit of resonant grounded system, and discusses the difference of electrical characteristics between faulty feeder and sound feeders by using shunt resistors. To reduce the influence of shunt resistors on the system and improve the detection sensitivity, it presents the method of shunting multi-level resistors, and it proves the sensitivity and reliability of this method by EMTP simulation.

Sign in / Sign up

Export Citation Format

Share Document