scholarly journals Study of the Dynamic Recrystallization Process of the Inconel625 Alloy at a High Strain Rate

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 510 ◽  
Author(s):  
Zhi Jia ◽  
Zexi Gao ◽  
Jinjin Ji ◽  
Dexue Liu ◽  
Tingbiao Guo ◽  
...  
Keyword(s):  
Dynamic Recrystallization ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Volume Fraction ◽  
Electron Backscatter Diffraction ◽  
Texture Evolution ◽  
True Strain ◽  
Recrystallization Process ◽  
Compression Process

High-temperature compression and electron backscatter diffraction (EBSD) techniques were used in a systematic investigation of the dynamic recrystallization (DRX) behavior and texture evolution of the Inconel625 alloy. The true stress–true strain curves and the constitutive equation of Inconel625 were obtained at temperatures ranging from 900 to 1200 °C and strain rates of 10, 1, 0.1, and 0.01 s−1. The adiabatic heating effect was observed during the hot compression process. At a high strain rate, as the temperature increased, the grains initially refined and then grew, and the proportion of high-angle grain boundaries increased. The volume fraction of the dynamic recrystallization increased. Most of the grains were randomly distributed and the proportion of recrystallized texture components first increased and then decreased. Complete dynamic recrystallization occurred at 1100 °C, where the recrystallized volume fraction and the random distribution ratios of grains reached a maximum. This study indicated that the dynamic recrystallization mechanism of the Inconel625 alloy at a high strain rate included continuous dynamic recrystallization with subgrain merging and rotation, and discontinuous dynamic recrystallization with bulging grain boundary induced by twinning. The latter mechanism was less dominant.

scholarly journals Microstructural Study of a Mg–Zn–Zr Alloy Hot Compressed at a High Strain Rate

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2348 ◽  
Author(s):  
Jing You ◽  
Yingjie Huang ◽  
Chuming Liu ◽  
Hongyi Zhan ◽  
Lixin Huang ◽  
...  
Keyword(s):  
Dynamic Recrystallization ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
True Strain ◽  
Marked Change ◽  
Weight Percent ◽  
Continuous Dynamic Recrystallization ◽  
Aspect Ratios ◽  
Coarse Grains

Understanding the correlation of plasticity with deformation and dynamic recrystallization (DRX) behaviors, in magnesium (Mg) alloys deformed under high-strain-rate conditions, is increasingly important for wrought Mg processing. In the present study, a ZK30 (Mg-2.61%Zn-0.66%Zr by weight percent (wt.%)) alloy in the as-forged state was hot compressed to various strain levels at a temperature of 350 °C and a strain rate of 10 s−1. Heterogeneous deformation and dynamic recrystallization (DRX) behaviors of the complicated microstructures in the deformed samples were analyzed via a grain-partitioning approach based on intra-grain misorientation analysis from electron back-scattered diffraction (EBSD). The ZK30 alloy showed excellent formability, remaining intact at a true strain of −1.11. Continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX) via grain boundary corrugation/bulging are the dominant mechanisms for the relaxation of strain energy during hot compression. Initial Zr-rich coarse grains undertook a significant portion of the plastic strain as the compression progressed, reflected by the increased misorientations within their interior and marked change in their aspect ratios. The results indicate that the excellent plasticity of the as-forged ZK30 alloy can be attributed to the operative CDRX mechanisms and the reduced deformation anisotropy of Zr-rich coarse grains containing Zn–Zr nano–precipitates.

scholarly journals Dynamic Recrystallization During High-Strain-Rate Tension of Copper

2016 ◽  
Vol 47 (6) ◽  
pp. 2555-2559 ◽  
Author(s):  
Nooshin Mortazavi ◽  
Nicola Bonora ◽  
Andrew Ruggiero ◽  
Magnus Hörnqvist Colliander
Keyword(s):  
Dynamic Recrystallization ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain

High Strain Rate Superplasticity and Microstructure Evolution in a Coarse-Grained Mg-Gd-Y-Zr Rolled Sheet

2014 ◽  
Vol 900 ◽  
pp. 719-724
Author(s):  
Ying Zheng ◽  
Chang Ping Tang ◽  
Yun Lai Deng
Keyword(s):  
Electron Microscopy ◽  
Dynamic Recrystallization ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Microstructural Analysis ◽  
Alloy Sheet ◽  
Coarse Grained ◽  
Dislocation Slip ◽  
Rolled Sheet

Superplasticity at high deformation rates is desirable in order to make superplastic forming more practical. High strain rate superplastic behavior and microstructure of the rolled Mg-Gd-Y-Zr alloy sheet were investigated. For the purposes, tensile tests at the strain rate of 0.01 s-1were conducted, which revealed that the sheet exhibited elongations of 180%~266%. Post-deforming microstructures were characterized by optical microscopy, scanning electron microscopy and transmission electron microscopy, while crystallographic orientation information was obtained from macro-texture analysis. The results show that the high strain rate superplasticity was attributed to class-I creep accommodated by dynamic recrystallization. It is suggested from microstructural analysis results that the interaction between second phases and dislocation facilitated dynamic recrystallization. The macro-texture at the strain of 0.8 still exhibited some characteristics of the crystal rotation arising from dislocation slip despite the occurrence of DRX.

Effect of twinning and dynamic recrystallization on the high strain rate rolling process

2010 ◽  
Vol 63 (10) ◽  
pp. 985-988 ◽  
Author(s):  
S.Q. Zhu ◽  
H.G. Yan ◽  
J.H. Chen ◽  
Y.Z. Wu ◽  
J.Z. Liu ◽  
...  
Keyword(s):  
Dynamic Recrystallization ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Rolling Process ◽  
High Strain Rate Rolling

scholarly journals High Strain Rate Properties of Various Forms of Ti6Al4V(ELI) Produced by Direct Metal Laser Sintering

2021 ◽  
Vol 11 (17) ◽  
pp. 8005
Author(s):  
Amos Muiruri ◽  
Maina Maringa ◽  
Willie du Preez
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Electron Backscatter Diffraction ◽  
Dynamic Strength ◽  
Strain Rates ◽  
Direct Metal Laser Sintering ◽  
Heat Treated ◽  
Electron Backscatter ◽  
Backscatter Diffraction

For analysis of engineering structural materials to withstand harsh environmental conditions, accurate knowledge of properties such as flow stress and failure over conditions of high strain rate and temperature plays an essential role. Such properties of additively manufactured Ti6Al4V(ELI) are not adequately studied. This paper documents an investigation of the high strain rate and temperature properties of different forms of heat-treated Ti6Al4V(ELI) samples produced by the direct metal laser sintering (DMLS). The microstructure and texture of the heat-treated samples were analysed using a scanning electron microscope (SEM) equipped with an electron backscatter diffraction detector for electron backscatter diffraction (EBSD) analysis. The split Hopkinson pressure bar (SHPB) equipment was used to carry out tests at strain rates of 750, 1500 and 2450 s−1, and temperatures of 25, 200 and 500 °C. The heat-treated samples of DMLS Ti6Al4V(ELI) alloys tested here were found to be sensitive to strain rate and temperature. At most strain rates and temperatures, the samples with finer microstructure exhibited higher dynamic strength and lower strain, while the dynamic strength and strain were lower and higher, respectively, for samples with coarse microstructure. The cut surfaces of the samples tested were characterised by a network of well-formed adiabatic shear bands (ASBs) with cracks propagating along them. The thickness of these ASBs varied with the strain rate, temperature, and various alloy forms.

Texture evolution in high strain rate deformed Cu–10Zn alloy

2012 ◽  
Vol 558 ◽  
pp. 761-765 ◽  
Author(s):  
N.P. Gurao ◽  
Rajeev Kapoor ◽  
Satyam Suwas
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Texture Evolution

Study of the Microstructure of AZ31B Magnesium Alloy under High Strain Rate Deformation

2011 ◽  
Vol 686 ◽  
pp. 325-331 ◽  
Author(s):  
Ping Li Mao ◽  
Zheng Liu ◽  
Chang Yi Wang ◽  
Zhi Wang
Keyword(s):  
Magnesium Alloy ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Volume Fraction ◽  
Split Hopkinson Pressure Bar ◽  
Prismatic Slip ◽  
Hopkinson Pressure Bar ◽  
Az31b Magnesium Alloy ◽  
High Strain Rate Deformation

In order to investigate the microstructure evolution under high strain rate deformation of magnesium alloy, AZ31B magnesium alloy was impacted by Split Hopkinson Pressure Bar within the strain rates of 496s-1 to 2120s-1, then the specimens were observed by optical microscopy. The results show that when the strain rate are relatively low (496s-1-964s-1), the microstructure is predominated by high density of twinning, while increase the strain rate to 2120s-1 the volume fraction of twins is decreased. This implies that at relatively lower strain rate the deformation mechanism of AZ31B magnesium alloy under impact loading is twinning; increasing the strain rate the prismatic slip and pyramidal slip may be active besides twinning.

Sign in / Sign up

Export Citation Format

Share Document