scholarly journals Fabrication, Characterization and Implementation of Thermo Resistive TiCu(N,O) Thin Films in a Polymer Injection Mold

Materials ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1423
Author(s):  
Eva Oliveira ◽  
João Paulo Silva ◽  
Jorge Laranjeira ◽  
Francisco Macedo ◽  
Senentxu Lanceros-Mendez ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Injection Molding ◽  
Polymer Melt ◽  
General Idea ◽  
Injection Molding Process ◽  
Molding Process ◽  
Steel Mold ◽  
Polymer Injection ◽  
Injection Process

This paper presents the development of metallic thermoresistive thin film, providing an innovative solution to dynamically control the temperature during the injection molding process of polymeric parts. The general idea was to tailor the signal response of the nitrogen- and oxygen-doped titanium-copper thin film (TiCu(N,O))-based transducers, in order to optimize their use in temperature sensor devices. The results reveal that the nitrogen or oxygen doping level has an evident effect on the thermoresistive response of TiCu(N,O) films. The temperature coefficient of resistance values reached 2.29 × 10−2 °C−1, which was almost six times higher than the traditional platinum-based sensors. In order to demonstrate the sensing capabilities of thin films, a proof-of-concept experiment was carried out, integrating the developed TiCu(N,O) films with the best response in an injection steel mold, connected to a data acquisition system. These novel sensor inserts proved to be sensitive to the temperature evolution during the injection process, directly in contact with the polymer melt in the mold, demonstrating their possible use in real operation devices where temperature profiles are a major parameter, such as the injection molding process of polymeric parts.

scholarly journals Evaluation by nanoindentation of technological products manufactured by pulse injection molding process

2018 ◽  
Vol 145 ◽  
pp. 02006
Author(s):  
Margarita Natova ◽  
Ivan Ivanov ◽  
Sabina Cherneva ◽  
Maria Datcheva ◽  
Roumen Iankov
Keyword(s):  
Injection Molding ◽  
Polymer Melt ◽  
Injection Molding Process ◽  
Melt Flow ◽  
Molding Process ◽  
Polymer Injection ◽  
Pulse Injection ◽  
Molding Flow ◽  
Different Parts ◽  
Technological Products

During conventional polymer injection molding, flow- and weld lines can arise at the molded parts caused by disturbed polymer melt flow when it crosses different parts of the equipment. Such processed plastic goods have discrete zones of inhomogeneities of very small dimensions. In order to stabilize the melt flow and to equalize dimensions of such defective products, an approach for pulse injection molding is applied during production of polymer packagings. Testing methods used for evaluation of macromechanical performance of processed polymer products are not readily applicable to estimate the changes in visual surface obtained during pulse injecting. To overcome this testing inconvenience the performance of processed packagings is evaluated by nanoindentation. Using this method, a quantitative assessment of the polymer properties is obtained from different parts of technological products.

Computational Study of the Effect of Governing Parameters on a Polymer Injection Molding Process for Single-Cavity and Multicavity Mold Systems

2009 ◽  
Vol 132 (1) ◽  
Author(s):  
M. Tutar ◽  
A. Karakus
Keyword(s):  
Injection Molding ◽  
Mold Insert ◽  
Polymer Melt ◽  
Injection Molding Process ◽  
Melt Flow ◽  
Flow Conditions ◽  
Molding Process ◽  
Polymer Injection ◽  
Solution Approach ◽  
Polymer Injection Molding

In the present study a more complete numerical solution approach using parallel computing technology is provided for the three-dimensional modeling of mold insert polymer injection molding process by considering the effects of phase-change and compressibility for non-Newtonian fluid flow conditions. A volume of fluid (VOF) method coupled with a finite volume approach is used to simulate the mold-filling stage of the injection molding process. The variations in viscosity and density in the polymer melt flow are successfully resolved in the present VOF method to more accurately represent the rheological behavior of the polymer melt flow during the mold filling. A comprehensive high-resolution differencing scheme (compressive interface capturing scheme for arbitrary meshes or CICSAM) is successfully utilized to capture moving interfaces and the pressure-implicit with splitting operators pressure-velocity coupling algorithm is employed to enable a higher degree of approximate relation between corrections for pressure and velocity. The capabilities of the proposed numerical methodology in modeling real molding flow conditions are verified through quantitative and qualitative comparisons with other simulation programs and the data obtained from the experimental study conducted. The present numerical results are also compared with each other for a polypropylene female threaded adaptor pipe fitting model with a metallic insert for varying governing process conditions/parameters to assess the modeling constraints and enhancements of the present numerical procedure and the effects of these conditions to optimize the polymer melt flow for mold insert polymer injection molding process. The numerical results suggest that the present numerical solution approach can be used with a confidence for further studies of optimization of design of mold insert polymer injection molding processes.

scholarly journals Electricity Consumption Estimation of the Polymer Material Injection-Molding Manufacturing Process: Empirical Model and Application

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1740 ◽  
Author(s):  
Ana Elduque ◽  
Daniel Elduque ◽  
Carmelo Pina ◽  
Isabel Clavería ◽  
Carlos Javierre
Keyword(s):  
Environmental Impact ◽  
Injection Molding ◽  
Empirical Model ◽  
Electricity Consumption ◽  
Injection Molding Process ◽  
Molding Process ◽  
Polymer Injection ◽  
Wide Range ◽  
Molded Parts ◽  
Polymer Injection Molding

Polymer injection-molding is one of the most used manufacturing processes for the production of plastic products. Its electricity consumption highly influences its cost as well as its environmental impact. Reducing these factors is one of the challenges that material science and production engineering face today. However, there is currently a lack of data regarding electricity consumption values for injection-molding, which leads to significant errors due to the inherent high variability of injection-molding and its configurations. In this paper, an empirical model is proposed to better estimate the electricity consumption and the environmental impact of the injection-molding process. This empirical model was created after measuring the electricity consumption of a wide range of parts. It provides a method to estimate both electricity consumption and environmental impact, taking into account characteristics of both the molded parts and the molding machine. A case study of an induction cooktop housing is presented, showing adequate accuracy of the empirical model and the importance of proper machine selection to reduce cost, electricity consumption, and environmental impact.

Evaluation of a Piezoelectric Energy Extraction Device for Cavity Pressure Sensing in Injection Molding

2003 ◽  
Author(s):  
Charles B. Theurer ◽  
Li Zhang ◽  
David Kazmer ◽  
Robert X. Gao
Keyword(s):  
Injection Molding ◽  
Mechanical Strain ◽  
Piezoelectric Element ◽  
Polymer Melt ◽  
High Energy ◽  
Injection Molding Process ◽  
Molding Process ◽  
Transient Model ◽  
Piezoelectric Energy ◽  
Wide Range

This paper presents the design, analysis, and validation of a self-energized piezoelectric pressure sensor that extracts energy from the pressure differential of the polymer melt during the injection molding process. To enable a self-energized sensor design, an analytical study has been conducted to establish a quantitative relationship between the polymer melt pressure and the energy that can be extracted through a piezoelectric converter. Temperature and pressure are monitored during an injection molding cycle and the performance of the piezoelectric element is evaluated with respect to a mechanically static, electrically transient model. In addition to corroboration of the proposed model, valuable statistical information about the working temperature in the prototype sensor will prove very useful in the package design of molding cavity sensors. A linear model examining the energy conversion mechanism due to interactions between the mechanical strain and the electric field developed within the piezoelectric device is established. This model is compared to the functional prototype design to evaluate the relevance of the assumptions and accuracy. The presented design enables a new generation of self-energized sensors that can be employed for the condition monitoring of a wide range of high-energy manufacturing processes.

Numerical Investigation on the Effect of Injection Pressure on Melt Front Pressure and Velocity Drop

2015 ◽  
Vol 786 ◽  
pp. 210-214
Author(s):  
M.S. Rusdi ◽  
Mohd Zulkifly Abdullah ◽  
A.S. Mahmud ◽  
C.Y. Khor ◽  
M.S. Abdul Aziz ◽  
...  
Keyword(s):  
Injection Molding ◽  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Injection Pressure ◽  
Simulation Software ◽  
Mold Cavity ◽  
Injection Molding Process ◽  
Flow Profile ◽  
Molding Process ◽  
Injection Process

Computational Fluid Dynamic (CFD) was used to simulate the injection molding process of a tray. The study focuses on pressure distribution and velocity drop during the injection process. CFD simulation software ANSYS FLUENT 14 was utilized in this study. The melt front pressure in the mold cavity shows that it was affected by the shape of mold cavity and filling stage. The melt front pressure will decrease as the flow move further than the sprue but it will increase rapidly when the mold was about to be fully filled. The slight pressure drop was detected when the molten flow meets the rib of the tray. The velocity of higher injection pressure was greater than the lower injection pressure but the velocity rapidly dropped when the melt front fully filled the cavity. The current predicted flow profile was validated by the experimental results, which demonstrates the excellent capability of the simulation tool in solving injection-molding problems.

An Investigation into the Influencing Factors for Polymer Melt at the Filling Stage in Micro Injection Molding

2013 ◽  
Vol 562-565 ◽  
pp. 1380-1386
Author(s):  
Jian Zhuang ◽  
Da Ming Wu ◽  
Ya Jun Zhang ◽  
Lin Wang ◽  
Xiong Wei Wang ◽  
...  
Keyword(s):  
Injection Molding ◽  
Influencing Factors ◽  
Polymer Melt ◽  
Theoretical Models ◽  
Injection Molding Process ◽  
Melt Flow ◽  
Molding Process ◽  
Micro Injection Molding ◽  
Filling Stage ◽  
Conventional Injection Molding

The flow behaviors for polymer melt at the filling stage in micro injection molding are different from those in conventional injection molding due to the miniaturization of plastic parts. This paper focuses on the study of the effects of three main influencing factors, including the microscale viscosity and wall slip, on melt filling flow in microscale neglected those in conventional injection molding process. The theoretical models and the interrelation of these factors in microscale channels were constructed by means of the model correction method. Then, the micro melt flow behaviors were investigated with comparisons of the available experimental data. The results indicate that the dimensions affect the shear rates and viscous dissipation, which in turn affects the apparent viscosity. Finally, the conclusion is that the melt flow behaviors in microchannels are different from those in macrochannels owing to these significant influencing factors.

Sign in / Sign up

Export Citation Format

Share Document