scholarly journals Debunking the Concept of Dentinal Tubule Penetration of Endodontic Sealers: Sealer Staining with Rhodamine B Fluorescent Dye Is an Inadequate Method

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3211
Author(s):  
David Donnermeyer ◽  
Sina Schmidt ◽  
Arno Rohrbach ◽  
Johannes Berlandi ◽  
Sebastian Bürklein ◽  
...  
Keyword(s):  
Penetration Depth ◽  
Rhodamine B ◽  
Root Canal ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dentinal Tubule ◽  
Dentinal Tubules ◽  
Ah Plus ◽  
Root Dentin ◽  
Rhodamine B Dye

The aim of this study was to investigate the suitability of rhodamine B dye staining of an epoxy resin sealer (AH Plus) and calcium-silicate-based sealers (Total Fill BC Sealer, BioRoot RCS) to represent the penetration depth of the sealers into dentinal tubules after root canal obturation. In a three-step process, (1) leaching of rhodamine B from sealers into a buffer solution, (2) passive penetration of leached rhodamine B into dentinal tubules, and (3) conformity of rhodamine B penetration assessed by confocal laser scanning microscopy (CLSM), and sealer penetration assessed by scanning electron microscopy (SEM), in root-canal-filled teeth, were evaluated. Rhodamine B dye massively leached out of Total Fill BC Sealer and BioRoot RCS into the phosphate-buffered saline (PBS). A pinkish coloration of AH Plus was found after contact with PBS. Leached rhodamine B dye passively penetrated dentinal tubules from all three sealers when placed on root dentin. No correlation was observed between sealer penetration in SEM and rhodamine B penetration in CLSM. Staining of sealers using rhodamine B is an inadequate method with which to evaluate sealer penetration depth into dentinal tubules, as it overestimates the penetration of sealers into root dentin tubules.

scholarly journals Dentinal Tubule Penetration of a Calcium Silicate-Based Root Canal Sealer Using a Specific Calcium Fluorophore

2020 ◽  
Vol 31 (2) ◽  
pp. 109-115
Author(s):  
Viviane Siqueira Coronas ◽  
Natália Villa ◽  
Angela Longo do Nascimento ◽  
Pedro Henrique Marks Duarte ◽  
Ricardo Abreu da Rosa ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Root Canal ◽  
Laser Scanning ◽  
Root Apex ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dentinal Tubule ◽  
Maxillary Molars ◽  
Ah Plus ◽  
Tubule Penetration

Abstract This study aimed to evaluate penetrability on dentinal tubule of a new bioceramic sealer through confocal laser scanning microscopy (CLSM). A specific fluorophore (Fluo-3) was mixed with the sealer. Forty distobuccal roots from maxillary molars were selected, and root canal preparation was carried out with Wave One Gold # 35.06 instruments. Roots were randomly assigned to 4 groups according to the filling procedures: Bioceramic/Lentulo (Sealer Plus BC); Bioceramic/EasyClean group, three activation of the sealer (3x20 s) with Easy Clean instrument; Bioceramic/Irrisonic: ultrasonic activation for 30 s; and AHplus/Lentulo: epoxy resin based sealer (AH Plus) was utilized with the same protocol as the BC/LE group. After 72 h, specimens were transversally sectioned at 2 and 7 mm from root apex and then analyzed through CLSM. Sealer penetration area on dentinal tubule was measured by Adobe Photoshop CC2018. Kruskal Wallis and Wilcoxon T tests were carried out. Penetrability results were similar for both sealers regardless of which technique was performed to activate them inside the root canal (p>0.05). It is reasonable to conclude that penetration of bioceramic and epoxy resin based sealers occurred unimpressively. The type of instrument used to activate bioceramic sealer did not affect penetrability. Fluo 3 should be recommended as the fluorophore to evaluate dentinal tubule penetration of bioceramic sealers.

scholarly journals Evaluation of Antibacterial Efficacy of Vitex negundo Linn. extract as Root Canal Irrigant against Enterococcus faecalis and its penetration into Root Dentin: An in-vitro study

2020 ◽  
Vol 11 (2) ◽  
pp. 193-199
Author(s):  
Suruchi Santosh Gupta ◽  
Nilima Thosar ◽  
Nilesh Rathi ◽  
Sudhindra M Baliga ◽  
Yagnesh Thakkar ◽  
...  
Keyword(s):  
Penetration Depth ◽  
Enterococcus Faecalis ◽  
Root Canal ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Antibacterial Efficacy ◽  
Vitex Negundo ◽  
Root Dentin ◽  
Root Canal Irrigant

Introduction: The aim of this study was to evaluate the antibacterial efficacy of Vitex negundo Linn. extract as root canal irrigant against Enterococcus faecalis and its penetration into root dentin. Methods and Materials: Forty single rooted premolars were randomly divided into 4 groups: 3% Sodium hypochlorite (NaOCl), 2% Chlorhexidine (CHX) , 100mg/ml Vitex negundo Linn. and saline as control all mixed with Rhodamine B dye. Test samples were analysed for bacterial count before and after irrigation using absorbent paper points and the colony forming units were recorded and measured. Sectioning of the samples was performed at three levels 3mm,6mm,9mm from apex and then these samples were analysed using confocal laser scanning microscopy for penetration depth of the irrigant within the dentinal tubules. Paired t-test and ANOVA test were used to perform statistical analysis with level of significance set at 0.05 Results: The mean CFU/ml count of Enterococcus facealis reduced significantly in all the groups post irrigation. All the irrigants showed maximum penetration depth at coronal third level compared to middle and apical third level respectively. The penetration depth of NaOCl group was better when compared to CHX group and Vitex negundo Linn. group but the difference was statistically not significant. Conclusion: Although 3% NaOCl was the most effective irrigant, all agents exerted acceptable antimicrobial activity against Enterococcus faecalis and penetration depth within tubules of dentin.

scholarly journals Effect of ethanol-conditioned dentine on sealer penetration into dentinal tubules

2021 ◽  
Vol 20 ◽  
pp. e211194
Author(s):  
Carlos de Morais Souto Pantoja ◽  
Diogo Henrique Da Silva ◽  
Adriana De Jesus Soares ◽  
Caio Cezar Randi Ferraz ◽  
Brenda Paula Figueiredo de Almeida Gomes ◽  
...  
Keyword(s):  
Fluorescence Intensity ◽  
Rhodamine B ◽  
Root Canal ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Drying Methods ◽  
Canal Wall ◽  
Dentinal Tubules ◽  
Anterior Teeth

Aim: The aim of this study was to evaluate the effect of ethanol-conditioned dentin on endodontic sealer penetration into dentinal tubules by confocal laser scanning microscopy (CLSM). Methods: Forty human maxillary anterior teeth were instrumented and divided into four groups (n = 10) according to the drying methods: 1) wet: vacuum only, 2) paper points: vacuum + absorbent paper points, (3) 70% ethanol: 70% ethanol (1 min) + vacuum + absorbent paper points, and (4) 100% ethanol: 100% ethanol (1 min)  + vacuum + absorbent paper points. All root canals were filled with resin-based endodontic sealer. Four sections from each third (cervical, middle, and apical) were examined by CLSM. Root canal wall perimeter infiltrated by sealer, maximum depth of sealer penetration, percentage of penetrated area, and fluorescence intensity of rhodamine B were measured. Statistical analysis was performed by analysis of variance and Tukey’s tests (α = 0.05). Results: No statistical difference was found when percentage of root canal wall coverage infiltrated by sealer were compared. The groups in which ethanol solutions were used presented greater depth of sealer penetration, higher percentage of penetrated area, and higher fluorescence intensity of rhodamine B (p< 0.05) when compared with the wet and paper point groups. Overall, 100% ethanol produced better results than 70% ethanol, except for rhodamine B intensity (cervical third). In addition, the absorbent paper points drying method behaved better than did vacuum only group, except for rhodamine B intensity (apical third). Conclusion: Ethanol-conditioned dentin improved the penetration of resin-based sealer into dentinal tubules, especially at the concentration of 100%.

scholarly journals Filling Effectiveness and Dentinal Penetration of Endodontic Sealers: A Stereo and Confocal Laser Scanning Microscopy Study

2015 ◽  
Vol 26 (5) ◽  
pp. 541-546 ◽  
Author(s):  
Rogério Vieira Silva ◽  
Frank Ferreira Silveira ◽  
Martinho Campolina Rebello Horta ◽  
Marco Antônio Húngaro Duarte ◽  
Bruno Cavalini Cavenago ◽  
...  
Keyword(s):  
Confocal Laser Scanning Microscopy ◽  
Root Canal ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Scanning Microscopy ◽  
Confocal Laser ◽  
Filling Material ◽  
Dentinal Tubules ◽  
Ah Plus

Abstract: The aim of this study was to evaluate the filling effectiveness and dentinal penetration of the sealers AH Plus, Pulp Canal Sealer EWT, Sealapex and MTA Fillapex applied according to the vertical condensation technique using thermoplastic gutta-percha. Forty single-rooted teeth were selected. After chemical-mechanical preparation and root-canal filling, sections of the root (2, 4 and 6 mm from the apex) were obtained and analyzed by stereo microscopy and confocal laser scanning microscopy. Data were tabulated and statistically analyzed. With regard to the assessment of void spaces in the filling material at 2 mm from the apex, the sealers showed similar results, but at 4 and 6 mm from the apex, MTA Fillapex had inferior performance compared to AH Plus (at 4 mm), Pulp Canal Sealer EWT (at 4 and 6 mm) and Sealapex (at 6 mm) (p<0.05). With regard to the penetration into dentinal tubules at 2 mm from the apex, the sealers also showed similar results, but at 4 and 6 mm Pulp Canal Sealer EWT had an inferior performance compared to MTA Fillapex and AH Plus, respectively (p<0.05). All four sealers were found to be similar regarding adaptation of the filling material to the root canal walls, except the MTA Fillapex, which showed failures at 4 and 6 mm from the root apex. With regard to the ability to penetrate into the dentinal tubules, the sealers were found to be equivalent, except for the Pulp Canal Sealer EWT as it had poorer results at 4 and 6 mm compared to MTA Fillapex and AH Plus, respectively.

scholarly journals The Penetration Ability of Calcium Silicate Root Canal Sealers into Dentinal Tubules Compared to Conventional Resin-Based Sealer: A Confocal Laser Scanning Microscopy Study

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 531 ◽  
Author(s):  
Yemi Kim ◽  
Ban-Suk Kim ◽  
Yong-Min Kim ◽  
Donghee Lee ◽  
Sin-Young Kim
Keyword(s):  
Root Canal ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Intensity Level ◽  
Single Cone ◽  
Penetration Ability ◽  
Ah Plus ◽  
Root Canal Sealers ◽  
Apical Area

The purpose of this study was to compare the penetration ability of calcium silicate root canal sealers and conventional resin-based sealer using confocal laser scanning microscopy (CLSM). A total of 60 recently extracted single-rooted human premolars were used in this study. The root canals were prepared to a size 40/0.06 taper with ProFile rotary instruments and irrigated with NaOCl and EDTA. After drying all canals, the specimens were randomly divided into three experimental groups (n = 20): Group 1, gutta-percha (GP)/AH Plus with continuous wave compaction; group 2, GP/BioRoot RCS with a single-cone technique; and group 3, GP/Endoseal MTA with a single-cone technique. All experimental samples were sectioned perpendicular to their long axis using a low-speed diamond wheel at the apical, middle, and coronal third levels. The penetration abilities of all samples were evaluated using CLSM. A Kruskal–Wallis analysis and a series of Mann–Whitney U post hoc tests were performed. A higher intensity level was found in the coronal area and a lower intensity level in the apical area in all the experimental groups. The AH Plus group showed higher sum fluorescence intensity in the apical and coronal thirds compared with the BioRoot RCS and Endoseal MTA groups, whereas the BioRoot RCS group showed a higher intensity level in the middle third, similar to the AH Plus group. The maximum sealer penetration depth was low in the apical area and high in the coronal area in the AH Plus and Endoseal MTA groups. In the BioRoot RCS group, maximum sealer penetration was observed in the middle third. In conclusion, there were significant differences in sealer penetration pattern and distance according to the root level and sealer type.

scholarly journals Correlation between Bond Strength to Dentin and Sealers Penetration by Push-Out Test and CLSM Analysis

2019 ◽  
Vol 30 (6) ◽  
pp. 555-562
Author(s):  
Maybell Tedesco ◽  
Marcelo Carvalho Chain ◽  
Wilson Tadeu Felippe ◽  
Ana Maria Hecke Alves ◽  
Lucas da Fonseca Roberti Garcia ◽  
...  
Keyword(s):  
Bond Strength ◽  
Laser Scanning ◽  
Regional Analysis ◽  
Kendall Test ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dentinal Tubules ◽  
Significant Difference ◽  
Ah Plus ◽  
Push Out

Abstract This study correlated the bond strength (BS) and dentin penetration of different sealers by push-out test and Confocal Laser Scanning Microscopy (CLSM) analysis. Forty-five root canals were prepared according to the crown-down technique and filled with gutta-percha associated to the following sealers (n=15): Endofill, AH Plus and MTA Fillapex. Five canals of each group were filled with the sealers added with 0.1% Rhodamine B dye. Next, the specimens were transversely sectioned and submitted to the push-out test (n=10) and CLSM analysis (n=5). The BS data showed the following means (MPa) and standard deviation: AH Plus (4.17±1.86); MTA Fillapex (3.13±1.96) and Endofill (2.10±1.03). Statistical analysis (two-way ANOVA, α=0.05) showed significant difference among sealers (p<0.001) and root canal thirds (p<0.001). The BS results of Endofill and MTA Fillapex were statistically similar (p>0.05), however, they were statistically different from AH Plus (p<0.001). The regional analysis of BS showed similarity between middle and apical thirds (p>0.05), and both were different from coronal portion (p<0.001). CLSM analysis verified tags formation in all groups and higher penetration of the specimens filled with AH Plus (p<0.05). The Kendall test (correlation between BS to dentin and sealer penetration into dentinal tubules) and the Pearson test (between failures pattern and sealer penetration into dentinal tubules) did not show correlation between the variables evaluated for all the tested sealers (p>0.05). AH Plus group had higher BS to dentin, and deeper tags formation than the other sealers. There was no significant correlation between BS and intratubular penetration of the tested sealers.

scholarly journals Effects of Different Final Irrigating Solutions on Depth of Sealer Penetration into Dentinal Tubules: An in vitro Confocal Laser Microscopic Study

2017 ◽  
Vol 2 (2) ◽  
pp. 69-73
Author(s):  
Madhavi A Shetty
Keyword(s):  
Microscopic Study ◽  
Root Canal ◽  
Maximum Depth ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dentinal Tubules ◽  
Root Canals ◽  
Group I ◽  
Significant Difference

ABSTRACT Aim To evaluate the maximum depth of sealer penetration into dentinal tubules at the coronal, middle, and apical third of root canals, following the use of different final irrigation solutions. Materials and methods Eighty freshly extracted mandibular premolars were selected for the study. After decoronation, instrumentation of samples was done using Protaper universal rotary file system till F4. During shaping and cleaning of root canal, 5.25% concentration of sodium hypochlorite (NaOCl) was used for irrigation. The samples were then randomly divided into four groups (n = 20) depending on the final irrigating solution used. Group I: 17% aqueous ethylenediaminetetraacetic acid (MA) (aq. EDTA); group II: 10% citric acid (CA); group III: 5% maleic acid; group IV: 5.25% conc. NaOCl. Passive ultrasonic irrigation (PUI) was used to activate each final irrigating solution. The samples were obturated using warm lateral condensation technique with guttapercha coated with AH plus sealer mixed with rhodamine B dye. Confocal laser scanning microscopy (CLSM) examined the sealer penetration depth. Results The Kruskal-Wallis analysis results showed that there was a significant difference in the maximum depth of sealer penetration among all groups in all sections (p < 0.05). The coronal sections of the root canals in each group showed a significantly higher depth of sealer penetration than did the apical and middle sections (p < 0.05). Conclusion A combination of 17% aq. EDTA and PUI used for final irrigation proved to be more effective for sealer penetration into the dentinal tubules. Clinical significance Final irrigation protocol followed is of paramount importance in achieving complete disinfection within the root canal, and also the penetration of sealer serves as an indicator of the extent to which the smear layer was removed. How to cite this article Shetty MA, Hegde V. Effects of Different Final Irrigating Solutions on Depth of Sealer Penetration into Dentinal Tubules: An in vitro Confocal Laser Microscopic Study. J Oper Dent Endod 2017;2(2):69-73.

scholarly journals The Effect of Different Final Irrigation Regimens on the Dentinal Tubule Penetration of Three Different Root Canal Sealers: A Confocal Laser Scanning Microscopy Study In Vitro

Scanning ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Tufan Ozasir ◽  
Birgul Eren ◽  
Kamran Gulsahi ◽  
Mete Ungor
Keyword(s):  
Confocal Laser Scanning Microscopy ◽  
Root Canal ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Scanning Microscopy ◽  
Confocal Laser ◽  
Ah Plus ◽  
Tubule Penetration ◽  
Root Canal Sealers

This study evaluated the effects of different final irrigation regimens on the dentin tubule penetration of three different root canal sealers using confocal laser scanning microscopy (CLSM). A total of 160 single-rooted extracted mandibular premolar teeth were divided into five groups ( n = 32 each) according to the solution used in the final rinse protocol, as follows: 17% ethylenediaminetetraacetic acid (EDTA) (group 1), 17% EDTA and 2% chlorhexidine gluconate (CHX) (group 2), 7% maleic acid (MA) (group 3), 7% MA and 2% CHX (group 4), and 5.25% NaOCl (group 5). Two roots from each group were examined under scanning electron microscopy (SEM) to visualize smear layer removal. Experimental groups were then split randomly into three subgroups ( n = 10 ) and obturated using a cold lateral condensation technique with 0.1% rhodamine B-labelled sealers [either AH Plus (group A), EndoREZ (group E), or Tech BioSealer Endo (group T)] and gutta-percha. Specimens were sectioned and observed by CLSM to evaluate the percentage and maximum depth of sealer penetration at the apical, middle, and coronal levels. Statistical comparison was performed on grouped (apical, middle, and coronal segments) and ungrouped data using two-way ANOVA with Bonferroni post hoc test ( p < 0.01 ). AH Plus showed the greatest tubule penetration while Tech BioSealer Endo showed the least. Resin-based sealers displayed deeper and more consistent penetration. CHX irrigation positively influenced sealer tubule penetration.

scholarly journals Sealer penetration and marginal permeability after apicoectomy varying retrocavity preparation and retrofilling material

2006 ◽  
Vol 17 (4) ◽  
pp. 323-327 ◽  
Author(s):  
Renata Winik ◽  
Ângela Toshie Araki ◽  
José Augusto Alves Negrão ◽  
Marina Stella Bello-Silva ◽  
José Luiz Lage-Marques
Keyword(s):  
Rhodamine B ◽  
Root Canal ◽  
Sem Analysis ◽  
Canal System ◽  
Dentinal Tubules ◽  
Lower Permeability ◽  
Periapical Healing ◽  
Root Canal System ◽  
Rhodamine B Dye ◽  
Negative Controls

Apicoectomy failure is generally related to inappropriate marginal sealing of the retrocavity, which allows percolation of microorganisms and their products from root canal system to periapex. This study evaluated tubular penetration of canal sealers and marginal permeability after retrocavity irradiation with Er;Cr:YSGG laser and retrofilling with MTA or cyanoacrylate. Twenty-two single-rooted teeth were decoronated and endodontically treated, their apical 3 mm were resected and the root ends were retroprepared with a low-speed bur. Twenty roots were randomly assigned to 4 groups (n=5): GI and GII - retrofilling with MTA and cyanoacrylate, respectively; GIII and GIV - retrocavity irradiation with Er;Cr:YSGG laser (2.78 µm, 4 W, 20 Hz, 70.8 J/cm²) and retrofilling with MTA and cyanoacrylate, respectively. The remaining 2 roots served as positive and negative controls. The analysis of rhodamine B dye infiltration (p=0.05) demonstrated that laser irradiation and MTA retrofilling presented significantly higher permeability rates (p<0.05). Retrofilling with cyanoacrylate showed significantly lower permeability, either when laser was used or not on retrocavity. SEM analysis depicted more cyanoacrylate penetration through dentinal tubules when compared to MTA, suggesting a more efficient marginal sealing. Based on these results, it may be concluded that cyanoacrylate provided a less permeable retrofilling regardless of the retropreparation method, suggesting a more favorable condition to the establishment of the periapical healing.

Sign in / Sign up

Export Citation Format

Share Document