Comparison of Dentinal Tubule Penetration between a Calcium Silicate-Based Sealer with Ultrasonic Activation and an Epoxy Resin-Based Sealer: A Study Using Confocal Laser Scanning Microscopy

Objective The aim of this study was to compare the degree of dentinal penetration between an epoxy resin-based sealer applied by using two different filling methods and an ultrasonically activated calcium silicate-based sealer via confocal laser scanning microscopy (CLSM). Materials and Methods Forty-five extracted permanent maxillary premolars with type II canals (Vertucci’s classification) were subjected to the experiment. The root canals were instrumented and distributed randomly into the following three groups: AH Plus + continuous wave technique (AHC group); AH Plus + single cone technique (AHS group); and Endoseal MTA + single cone technique with ultrasonic activation (EMS) group. Each sealer was labeled with rhodamine B dye to allow visualization under CLSM. The sealer penetration depth in each sample was observed at 2 mm and 5 mm from the apex by using CLSM. The data were statistically analyzed by using analysis of variance or Kruskal–Wallis H test according to normality of variable (α = 0.05). Results In all groups, the maximum sealer penetration depth, mean fluorescence intensity, and sum fluorescence intensity values were higher at the 5-mm level than at the 2-mm level. At the 5-mm level, the EMS group showed the lowest value (p = 0.02). At the 2-mm level, there were no statistically significant differences among any of the groups. The AHC group showed higher values than the other groups, but there was no statistically significant difference in the apical area where access of instruments was difficult. Conclusion The AHC group showed the highest dentinal tubule penetration, but had questionable filing efficacy in the apical area, which is of particular importance for the success of root canal treatment. Therefore, in areas such as the apical 2 mm of premolars with type II canals, which are difficult to access by using instruments such as heat carriers, other appropriate approaches may be required accordingly.

The Effect of Different Final Irrigation Regimens on the Dentinal Tubule Penetration of Three Different Root Canal Sealers: A Confocal Laser Scanning Microscopy Study In Vitro

This study evaluated the effects of different final irrigation regimens on the dentin tubule penetration of three different root canal sealers using confocal laser scanning microscopy (CLSM). A total of 160 single-rooted extracted mandibular premolar teeth were divided into five groups ( n = 32 each) according to the solution used in the final rinse protocol, as follows: 17% ethylenediaminetetraacetic acid (EDTA) (group 1), 17% EDTA and 2% chlorhexidine gluconate (CHX) (group 2), 7% maleic acid (MA) (group 3), 7% MA and 2% CHX (group 4), and 5.25% NaOCl (group 5). Two roots from each group were examined under scanning electron microscopy (SEM) to visualize smear layer removal. Experimental groups were then split randomly into three subgroups ( n = 10 ) and obturated using a cold lateral condensation technique with 0.1% rhodamine B-labelled sealers [either AH Plus (group A), EndoREZ (group E), or Tech BioSealer Endo (group T)] and gutta-percha. Specimens were sectioned and observed by CLSM to evaluate the percentage and maximum depth of sealer penetration at the apical, middle, and coronal levels. Statistical comparison was performed on grouped (apical, middle, and coronal segments) and ungrouped data using two-way ANOVA with Bonferroni post hoc test ( p < 0.01 ). AH Plus showed the greatest tubule penetration while Tech BioSealer Endo showed the least. Resin-based sealers displayed deeper and more consistent penetration. CHX irrigation positively influenced sealer tubule penetration.

A comparative study of dentinal tubule penetration and the retreatability of EndoSequence BC Sealer HiFlow, iRoot SP, and AH Plus with different obturation techniques

Objectives This study aimed to evaluate dentinal tubule penetration and the retreatability of EndoSequence BC Sealer HiFlow (HiFlow), iRoot SP, and AH Plus when using the single-cone (SC) or continuous wave condensation (CWC) technique. Materials and methods Sixty-five single-rooted teeth were instrumented and randomly divided into 5 groups: group 1, AH Plus/CWC; group 2, iRoot SP/CWC; group 3, iRoot SP/SC; group 4, HiFlow/CWC; and group 5, HiFlow/SC. The ability to re-establish patency during endodontic retreatment was recorded, as was the time taken to reach the working length. Dentinal tubule penetration and remaining debris after retreatment were evaluated by confocal microscopy and scanning electron microscopy. Data were analyzed by Kruskal-Wallis test and Dunn’s multiple comparisons test (α = 0.05). Results The HiFlow/CWC and iRoot SP/CWC groups required more time to reach the working length than groups that underwent the SC technique regardless of the sealer used (P < .05). The HiFlow/CWC group showed a significantly higher percentage of sealer penetration area than that of the iRoot SP/SC at 4 mm from the apex (P < .05) and penetrated deeper into dentinal tubules than iRoot SP/SC at both 8-mm and 12-mm levels (P < .05). Moreover, the HiFlow/CWC and HiFlow/SC groups demonstrated less remaining sealer along the canal wall than AH Plus/CWC group at 4-mm level (P < .05). Conclusions HiFlow/CWC technique showed better performance in dentinal tubule penetration than that of iRoot SP/SC. Both HiFlow and iRoot SP combined with CWC technique groups required more retreatment time than the other groups. Furthermore, using HiFlow with either the CWC or SC technique left less remaining sealer at 4-mm level than using AH Plus with the CWC technique during retreatment. Clinical relevance With favorable performance in dentinal tubule penetration and retreatability in endodontic retreatment, the combined use of EndoSequence BC Sealer HiFlow with the recommended continuous wave condensation technique may be a worthwhile choice in root canal treatment.

Could the Calcium Silicate-Based Sealer Presentation Form Influence Dentinal Sealing? An In Vitro Confocal Laser Study on Tubular Penetration

Dentinal tubule penetration influences root canal treatment sealing. The aim of this study was to compare dentinal penetration of two clinical presentations of silicate-based sealers using confocal laser. Sixty single-rooted human teeth from 50–70 year-old patients extracted for orthodontic/periodontal reasons were used. Canals were prepared using Mtwo system up to 35/0.04, with 5.25% NaOCl irrigation and final irrigation using 17% EDTA. Teeth were randomly assigned into study groups (ni = 20): EndoSequence BC sealer (ES, group 1), BioRoot RCS (BR, group 2); and a control group (nc = 20) with AH Plus (AHP). Root canals were obturated with 35/0.04 gutta-percha (single-cone technique). The samples were obtained from apical, middle, and coronal thirds. Dentinal tubule penetration depth and percentage of penetration around the canal perimeter were measured. The statistical analysis was performed using Mann Whitney U test and Wilcoxon t-test (95% confidence interval). ES exhibited a significantly higher penetration than AHP in apical and middle thirds (p < 0.05), and in middle and coronal thirds relative to BR (p < 0.05). The percentage of penetration around the canal perimeter was significantly higher for ES compared to BR in all thirds, but only in the apical third for AHP (p < 0.05). The pre-mixed silicate-based sealer exhibited better penetration than the powder/liquid one.

A New Calcium Silicate-Based Root Canal Dressing: Physical and Chemical Properties, Cytotoxicity and Dentinal Tubule Penetration

The aims of this study were to evaluate the physical and chemical properties, cytotoxicity and dentinal tubule penetration of a new calcium silicate-based root canal dressing. For pH and calcium ion release evaluation (1, 24, 72 and 168 h) were used a pH meter and colorimetric spectrophotometer, respectively. Radiopacity evaluation followed the ISO 6876:2012. Cytotoxicity was evaluated by the percentage of cell viability using MTT assay. Illustrative images of dentinal tubule penetration were obtained using confocal laser scanning microscopy (CLSM). Data from pH and calcium ion release were statistically analyzed by two-way analysis of variance and Tukey test. Radiopacity was analyzed using the Student t-test. The statistical tests for cytotoxicity results were the one-way analysis of variance and Tukey test. Both materials showed alkaline pH in all experimental times. The pH values for calcium hydroxide paste were higher than bioceramic paste at 1, 24, and 72 h (p<0.05). The calcium ion release of bioceramic was lower than the calcium hydroxide paste only at 24 h (p<0.05). The bioceramic was more radiopaque than the calcium hydroxide paste (p<0.05). Bioceramic paste presented a dose and time-dependent cytotoxic effect after MTT assay. CLSM images showed absence of tubule penetration for both pastes. The new calcium silicate-based canal dressing presented alkaline pH, high calcium release, and acceptable radiopacity. Bio C Temp showed a dose and time-dependent cytotoxic and absence of dentinal tubule penetration.