scholarly journals Improving the Performance of Steel Machining Processes through Cutting by Vibration Control

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5712
Author(s):  
Mihaela Oleksik ◽  
Dan Dobrotă ◽  
Mădălin Tomescu ◽  
Valentin Petrescu
Keyword(s):  
Fourier Transformation ◽  
Vibration Analysis ◽  
Cutting Tool ◽  
Cutting Process ◽  
Manufacturing Processes ◽  
Machining Processes ◽  
Short Time ◽  
Short Time Fourier Transformation ◽  
Dynamic Phenomena

Machining processes through cutting are accompanied by dynamic phenomena that influence the quality of the processed surfaces. Thus, this research aimed to design, make, and use a tool with optimal functional geometry, which allowed a reduction of the dynamic phenomena that occur in the cutting process. In order to carry out the research, the process of cutting by front turning with transversal advance was taken into account. Additionally, semi-finished products with a diameter of Ø = 150 mm made of C45 steel were chosen for processing (1.0503). The manufacturing processes were performed with the help of two tools: a cutting tool, the classic construction version, and another that was the improved construction version. In the first stage of the research, an analysis was made of the vibrations that appear in the cutting process when using the two types of tools. Vibration analysis considered the following: use of the Fast Fourier Transform (FFT) method, application of the Short-Time Fourier-Transformation (STFT) method, and observation of the acceleration of vibrations recorded during processing. After the vibration analysis, the roughness of the surfaces was measured and the parameter Ra was taken into account, but a series of diagrams were also drawn regarding the curved profiles, filtered profiles, and Abbott–Firestone curve. The research showed that use of the tool that is the improved constructive variant allows accentuated reduction of vibrations correlated with an improvement of the quality of the processed surfaces.

scholarly journals Smart Cutting Tools Used in the Processing of Aluminum Alloys

Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 28
Author(s):  
Dan Dobrotă ◽  
Sever-Gabriel Racz ◽  
Mihaela Oleksik ◽  
Ionela Rotaru ◽  
Mădălin Tomescu ◽  
...  
Keyword(s):  
Aluminum Alloys ◽  
Fourier Transformation ◽  
Vibration Analysis ◽  
Cutting Tools ◽  
Optimal Conditions ◽  
The Finite Element Method ◽  
Intelligent Tools ◽  
Longitudinal Turning ◽  
Short Time ◽  
Short Time Fourier Transformation

The processing of aluminum alloys in optimal conditions is a problem that has not yet been fully resolved. The research carried out so far has proposed various intelligent tools, but which cannot be used in the presence of cooling-lubricating fluids. The objective of the research carried out in the paper was to design intelligent tools that would allow a control of the vibrations of the tool tip and to determine a better roughness of the processed surfaces. The designed intelligent tools can be used successfully in the processing of aluminum alloys, not being sensitive to coolants-lubricants. In the research, the processing by longitudinal turning of a semi-finished product with a diameter Ø = 55 mm of aluminum alloy A2024-T3510 was considered. Two constructive variants of smart tools were designed, realized, and used, and the obtained results were compared with those registered for the tools in the classic constructive variant. The analysis of vibrations that occur during the cutting process was performed using the following methods: Fast Fourier Transform (FFT); Short-Time Fourier-Transformation (STFT); the analysis of signal of vibrations. A vibration analysis was also performed by modeling using the Finite Element Method (FEM). In the last part of the research, an analysis of the roughness of the processed surfaces, was carried out and a series of diagrams were drawn regarding curved profiles; filtered profiles; Abbott–Firestone curve. Research has shown that the use of smart tools in the proposed construction variants is a solution that can be used in very good conditions for processing aluminum alloys, in the presence of cooling-lubrication fluids.

scholarly journals Dispositivos De Interrupcion Subia (Dis) Para El Analisis De Raices Viruta

2014 ◽  
Vol 2 (2) ◽  
Author(s):  
Diego Alejandro Neira Moreno
Keyword(s):  
Cutting Tool ◽  
Cutting Tools ◽  
Scientific Research ◽  
Cutting Process ◽  
Work Piece ◽  
Mechanical Forces ◽  
Machining Processes ◽  
Research Instrument ◽  
Machined Parts ◽  
Interaction Phenomena

El estudio de las variables y efectos derivados del mecanizado provee herramientas de conocimiento tendientes a optimizar el uso de las herramientas y los procedimientos de maquinado industrial. Este artículo de reflexión aborda el uso de los dispositivos de interrupción súbita (DIS) como herramientas de obtención de raíces de viruta para la investigación científica del mecanizado industrial, y para el estudio de los efectos derivados de la interacción entre las herramientas de corte y el material de trabajo, en función de los cambios microestructurales del material de trabajo, dependientes de la temperatura producida y los esfuerzos mecánicos de la herramienta de corte durante el mecanizado. Mediante la reflexión se destaca la importancia de los DIS como instrumentos de investigación científica en la manufactura, ya que estos permiten obtener muestras de viruta para estudiar las variables incidentes en el maquinado y a partir de esta evidencia, proponer alternativas para optimizar la fabricación de piezas y la integridad de las herramientas empleadas en el proceso.AbstractThe study of the variables and effects derived from the machining processes brings the knowledge needed to optimize the use of machining tools and procedures. This article is an opinion piece about the use of quick stop devices (QSD) as a scientific research instrument in machining projects to obtain chip roots, to study the interaction phenomena between cutting tool and work piece material that depends on temperature and the mechanical forces produced by the cutting tool during the cutting process. This article deals about how important the QSD are as a research instruments in manufacture because with this instruments it is possible to analyze the machining variables, based on the evidences bring by the chip roots obtained with the instrument. It is possible to propose optimization alternatives in the manufacture of machined parts and the integrity of cutting tools.

Sensor Fusion Strategy in the Monitoring of Cutting Tool Wear

2006 ◽  
Vol 306-308 ◽  
pp. 727-732 ◽  
Author(s):  
Muslim Mahardika ◽  
Zahari Taha ◽  
Djoko Suharto ◽  
Kimiyuki Mitsui ◽  
Hideki Aoyama
Keyword(s):  
Tool Wear ◽  
Sensor Fusion ◽  
Cutting Tool ◽  
Fusion Technology ◽  
Machining Processes ◽  
Fusion Strategy ◽  
Cutting Tool Wear ◽  
Single Sensor ◽  
Paper Sensor

Cutting tool wear is a major problem in machining processes. It has a great effect on the quality of a workpiece. Thus, monitoring cutting tool wear is very important in order to maintain the workpiece quality as well to reduce production rate and production time. The use of a single sensor in a monitoring system may not be accurate to detect cutting tool wear. In this paper, sensor fusion technology is introduced for monitoring cutting tool wear.

scholarly journals Development of Combined Cutting Process using Water-Cooled Cutting Tool

2020 ◽  
Vol 9 (3) ◽  
pp. 329-332
Keyword(s):  
Heat Sink ◽  
High Performance ◽  
Cutting Tool ◽  
Cutting Edge ◽  
Cutting Process ◽  
Hard Materials ◽  
Cutting Zone

Technological aspects of the process of turning shafts with heating of their surfaces to temperatures below recrystallization point and simultaneous improvement of the heat sink from the cutting zone, as well as increasing stability of the cutting edge of a tool. A constructive diagram of the tool device has been developed, which allows for high-performance machining with a given quality of the surfaces of parts from hard materials on lathe equipment.

scholarly journals Pengaruh Parameter Pemesinan terhadap Kualitas Hasil Potong Mesin Bubut Maximat V13 pada Benda Kerja Poros PVC

2019 ◽  
Vol 2 (02) ◽  
pp. 19-24
Author(s):  
Kasijanto Kasijanto ◽  
Sadar Wahjudi ◽  
Listiyono Listiyono ◽  
Muhammad Fakhruddin
Keyword(s):  
Metal Cutting ◽  
Cutting Process ◽  
Machining Process ◽  
Work Piece ◽  
Machining Processes ◽  
Cutting Surface ◽  
Spindle Rotation ◽  
Feeding Speed ◽  
Tool Types

Metal cutting process (cutting process) is to cut metal to get the shape and size and quality of the planned cutting surface. The metal cutting process is carried out with special tools, according to the type of cutting process. So the tools for one process cannot be used in another process, even for similar processes, the tools cannot be exchanged if the cutting plans are not the same. Lathe process is a machining process to produce cylindrical machine parts which are carried out using a Lathe. Its basic form can be defined as the machining process of the outer surface of cylindrical or flat lathe objects. Polyvinyl Chloride, commonly abbreviated as PVC, is the third-order thermoplastic polymer in terms of total usage in the world, after Polyethylene (PE) and Polypropylene (PP). Worldwide, more than 50% of PVC produced is used in construction. PVC is produced by polymerizing vinyl chloride monomers (CH2 = CHCl). Because 57% of its mass is chlorine, PVC is the polymer that uses the lowest petroleum feedstock among other polymers. This research follows up the selection of configuration of the lathe machining process using plastic work pieces. In this study, Maximat V13 lathe and PVC type plastic were used. The variation of machining processes are spindle rotation (320, 540, and 900 rpm), feeding speed (0.07, 0.14, and 0.28), the use of tool types (carbide and HSS) and cooling (without cooling, coolant, and oil). So, with this research, it is expected that the optimal parameters in determining the configuration of the lathe machining process on a PVC work piece to produce a good turning surface can be achieved  

Tool Life Improvement by Externally Applied Ultrasonic Waves in Cutting Process of Dry Turning Operation of Mild Steel

2016 ◽  
Vol 860 ◽  
pp. 58-63
Author(s):  
Md Anayet Ullah Patwari ◽  
Md Shariful Islam Chowdhury ◽  
Mohammad Ahsan Habib ◽  
Afzal Hossain Neelav ◽  
Md Sharfat Latif ◽  
...  
Keyword(s):  
Tool Wear ◽  
Mild Steel ◽  
Tool Life ◽  
Cutting Tool ◽  
Ultrasonic Waves ◽  
Cutting Process ◽  
Ultrasonic Frequency ◽  
Machining Processes ◽  
Tool Vibration ◽  
Ultrasonic Sound

Tool wear is an inevitable impediment in machining processes. It is the gradual failure of cutting tools due to regular use. Tool wear affects productivity, dimensional accuracy thereby indirectly representing a significant portion of the machining costs. In this paper, a novel technique has been proposed and adopted with an aim to reduce tool wear. External ultrasonic sound waves were applied in the turning process of mild steel in an attempt to reduce the cutting tool vibration thereby leading to improvements in tool life. In this unique technique ultrasonic sound has been applied from the both sides of the tool holder in the cutting process as waves to reduce tool vibrations and improvement of chip behavior at a certain optimized frequency. Experiments were carried out at 60 KHz ultrasonic frequency to determine the tool wear to the best degree possible. To investigate the cause of ultrasonic effects on tool wear, cutting tool vibration and chip morphology were also studied. The experimental results showed significant improvements in tool wear, vibration and chip behavior.

Sign in / Sign up

Export Citation Format

Share Document