scholarly journals Pengaruh Parameter Pemesinan terhadap Kualitas Hasil Potong Mesin Bubut Maximat V13 pada Benda Kerja Poros PVC

2019 ◽  
Vol 2 (02) ◽  
pp. 19-24
Author(s):  
Kasijanto Kasijanto ◽  
Sadar Wahjudi ◽  
Listiyono Listiyono ◽  
Muhammad Fakhruddin
Keyword(s):  
Metal Cutting ◽  
Cutting Process ◽  
Machining Process ◽  
Work Piece ◽  
Machining Processes ◽  
Cutting Surface ◽  
Spindle Rotation ◽  
Feeding Speed ◽  
Tool Types

Metal cutting process (cutting process) is to cut metal to get the shape and size and quality of the planned cutting surface. The metal cutting process is carried out with special tools, according to the type of cutting process. So the tools for one process cannot be used in another process, even for similar processes, the tools cannot be exchanged if the cutting plans are not the same. Lathe process is a machining process to produce cylindrical machine parts which are carried out using a Lathe. Its basic form can be defined as the machining process of the outer surface of cylindrical or flat lathe objects. Polyvinyl Chloride, commonly abbreviated as PVC, is the third-order thermoplastic polymer in terms of total usage in the world, after Polyethylene (PE) and Polypropylene (PP). Worldwide, more than 50% of PVC produced is used in construction. PVC is produced by polymerizing vinyl chloride monomers (CH2 = CHCl). Because 57% of its mass is chlorine, PVC is the polymer that uses the lowest petroleum feedstock among other polymers. This research follows up the selection of configuration of the lathe machining process using plastic work pieces. In this study, Maximat V13 lathe and PVC type plastic were used. The variation of machining processes are spindle rotation (320, 540, and 900 rpm), feeding speed (0.07, 0.14, and 0.28), the use of tool types (carbide and HSS) and cooling (without cooling, coolant, and oil). So, with this research, it is expected that the optimal parameters in determining the configuration of the lathe machining process on a PVC work piece to produce a good turning surface can be achieved  

Cutting Force and Friction Modelling in High Speed End-Milling

2015 ◽  
Author(s):  
Sunday J. Ojolo ◽  
Olumuwiya Agunsoye ◽  
Oluwole Adesina ◽  
Gbeminiyi M. Sobamowo
Keyword(s):  
Temperature Field ◽  
Temperature Distribution ◽  
Cutting Forces ◽  
High Speed ◽  
Metal Cutting ◽  
Cutting Tool ◽  
End Milling ◽  
Cutting Process ◽  
Machining Process ◽  
Work Piece

Temperature field in metal cutting process is one of the most important phenomena in machining process. Temperature rise in machining directly or indirectly determines other cutting parameters such as tool life, tool wear, thermal deformation, surface quality and mechanics of chip formation. The variation in temperature of a cutting tool in end milling is more complicated than any other machining operation especially in high speed machining. It is therefore very important to investigate the temperature distribution on the cutting tool–work piece interface in end milling operation. The determination of the temperature field is carried out by the analysis of heat transfer in metal cutting zone. Most studies previously carried out on the temperature distribution model analysis were based on analytical model and with the used of conventional machining that is continuous cutting in nature. The limitations discovered in the models and validated experiments include the oversimplified assumptions which affect the accuracy of the models. In metal cutting process, thermo-mechanical coupling is required and to carry out any temperature field determination successfully, there is need to address the issue of various forces acting during cutting and the frictional effect on the tool-work piece interface. Most previous studies on the temperature field either neglected the effect of friction or assumed it to be constant. The friction model at the tool-work interface and tool-chip interface in metal cutting play a vital role in influencing the modelling process and the accuracy of predicted cutting forces, stress, and temperature distribution. In this work, mechanistic model was adopted to establish the cutting forces and also a new coefficient of friction was also established. This can be used to simulate the cutting process in order to enhance the machining quality especially surface finish and monitor the wear of tool.

Numerical-Experimental Correlation of Distortions Induced by Machining Process on Thin-Walled Nickel Super Alloy Forged Components

2012 ◽  
Vol 504-506 ◽  
pp. 1299-1304 ◽  
Author(s):  
Antonio del Prete ◽  
Antonio Alberto de Vitis ◽  
Rodolfo Franchi
Keyword(s):  
Numerical Models ◽  
Model Development ◽  
Aircraft Engine ◽  
Machining Process ◽  
Work Piece ◽  
Machining Processes ◽  
Thin Walled ◽  
Main Components ◽  
Machining Operations

AeroEngines main components made by nickel super alloys are mainly obtained by machining of large forged components. The work piece machining process generates some distortions that may also be relevant. In this contest, in many cases the removed volume in the machining operations represents a large percentage of the forged component in order to obtain the thin-walled wanted geometry. Due to this reason, the residual bulk stresses induced by the process history can lead to significant 3D geometric distortions in the machined component with unacceptable dimensions and shapes of the obtained product for comparison with the wanted geometry. Moreover, it is a matter of fact how, the final component distortions depend by the cutting strategy adopted in the machining process. The experimental study of such cutting strategies on real components are particularly time consuming and costly and for this reason the chance to study the problem using reliable numerical models it is particularly welcome. In the present work authors reports the numerical model development of the forging and machining processes needed for the production of a aircraft engine component and the comparison of the obtained results with the ones physically measured. The objective is to develop and validate a modeling method able to predicts the shape and the magnitude of the distortion induced by the machining operation on the considered component and to establish a possible strategy to suggest machining working steps able to improve the quality of the manufactured component reducing the needed production time.

Analysis and Fabrication of a Mechanical Quick-Stop for Research on Chip Formation in Hard Turning Process

2019 ◽  
Vol 889 ◽  
pp. 87-94
Author(s):  
Nguyen Thi Quoc Dung
Keyword(s):  
Chip Formation ◽  
Hard Turning ◽  
Manufacturing Industry ◽  
Metal Cutting ◽  
Cutting Speed ◽  
Cutting Process ◽  
Machining Process ◽  
Machining Parameters ◽  
Machining Processes ◽  
On Chip

Metal cutting is one of the most important machining processes in manufacturing industry. Thorough understanding of metal cutting process facilitates the optimization in selection of cutting tools and machining parameters. There are several methods used for studying phenomena in metal cutting process. Using a quick-top device is an efficient technique for investigation cutting process in which cutting action is stopped so suddenly that the “froze” specimen called the chip root honestly depicts what happened during cutting action. Design strategies of a quick-stop are accelerating cutting tool away from the workpiece or decelerating the workpiece remaining in engagement with the tool. Operation of a quick-stop device can be either mechanically or by explosive. Quick-stop devices can be utilized for various types of machining processes such as: turning, milling, drilling. This paper described the analysis, fabrication, and testing of a quick-stop device which is used for researching on chip formation in hard turning. This device has simple and safe operation which utilizes spring forces to retract the tool from workpiece during cutting. The results of performance at cutting speed of 283 m/min show that the separation distance is quite small, less than 0.2mm so that the deformations on the root chip are close to that while actual machining process. This indicates that the device has satisfied the requirements of an equipment for studying on chip formation.

Molecular Dynamics Study on the Impact of the Cutting Depth to the Titanium Nanometric Cutting

2014 ◽  
Vol 536-537 ◽  
pp. 1431-1434 ◽  
Author(s):  
Ying Zhu ◽  
Yin Cheng Zhang ◽  
Shun He Qi ◽  
Zhi Xiang
Keyword(s):  
Molecular Dynamics ◽  
Potential Energy ◽  
Cutting Force ◽  
Simulation Study ◽  
Cutting Process ◽  
Work Piece ◽  
Cutting Depth ◽  
Nanometric Cutting ◽  
The Impact

Based on the molecular dynamics (MD) theory, in this article, we made a simulation study on titanium nanometric cutting process at different cutting depths, and analyzed the changes of the cutting depth to the effects on the work piece morphology, system potential energy, cutting force and work piece temperature in this titanium nanometric cutting process. The results show that with the increase of the cutting depth, system potential energy, cutting force and work piece temperature will increase correspondingly while the surface quality of machined work piece will decrease.

scholarly journals Analysis of Forces in Vibro-Impact and Hot Vibro-Impact Turning of Advanced Alloys

2011 ◽  
Vol 70 ◽  
pp. 315-320 ◽  
Author(s):  
Riaz Muhammad ◽  
Agostino Maurotto ◽  
Anish Roy ◽  
Vadim V. Silberschmidt
Keyword(s):  
Finite Element ◽  
Cutting Forces ◽  
Three Dimensional ◽  
Element Model ◽  
Machining Process ◽  
Strain Rates ◽  
Machining Processes ◽  
Machined Surface ◽  
Cutting Zone

Analysis of the cutting process in machining of advanced alloys, which are typically difficult-to-machine materials, is a challenge that needs to be addressed. In a machining operation, cutting forces causes severe deformations in the proximity of the cutting edge, producing high stresses, strain, strain-rates and temperatures in the workpiece that ultimately affect the quality of the machined surface. In the present work, cutting forces generated in a vibro-impact and hot vibro-impact machining process of Ti-based alloy, using an in-house Ultrasonically Assisted Turning (UAT) setup, are studied. A three-dimensional, thermo-mechanically coupled, finite element model was developed to study the thermal and mechanical processes in the cutting zone for the various machining processes. Several advantages of ultrasonically assisted turning and hot ultrasonically assisted turning are demonstrated when compared to conventional turning.

scholarly journals Dispositivos De Interrupcion Subia (Dis) Para El Analisis De Raices Viruta

2014 ◽  
Vol 2 (2) ◽  
Author(s):  
Diego Alejandro Neira Moreno
Keyword(s):  
Cutting Tool ◽  
Cutting Tools ◽  
Scientific Research ◽  
Cutting Process ◽  
Work Piece ◽  
Mechanical Forces ◽  
Machining Processes ◽  
Research Instrument ◽  
Machined Parts ◽  
Interaction Phenomena

El estudio de las variables y efectos derivados del mecanizado provee herramientas de conocimiento tendientes a optimizar el uso de las herramientas y los procedimientos de maquinado industrial. Este artículo de reflexión aborda el uso de los dispositivos de interrupción súbita (DIS) como herramientas de obtención de raíces de viruta para la investigación científica del mecanizado industrial, y para el estudio de los efectos derivados de la interacción entre las herramientas de corte y el material de trabajo, en función de los cambios microestructurales del material de trabajo, dependientes de la temperatura producida y los esfuerzos mecánicos de la herramienta de corte durante el mecanizado. Mediante la reflexión se destaca la importancia de los DIS como instrumentos de investigación científica en la manufactura, ya que estos permiten obtener muestras de viruta para estudiar las variables incidentes en el maquinado y a partir de esta evidencia, proponer alternativas para optimizar la fabricación de piezas y la integridad de las herramientas empleadas en el proceso.AbstractThe study of the variables and effects derived from the machining processes brings the knowledge needed to optimize the use of machining tools and procedures. This article is an opinion piece about the use of quick stop devices (QSD) as a scientific research instrument in machining projects to obtain chip roots, to study the interaction phenomena between cutting tool and work piece material that depends on temperature and the mechanical forces produced by the cutting tool during the cutting process. This article deals about how important the QSD are as a research instruments in manufacture because with this instruments it is possible to analyze the machining variables, based on the evidences bring by the chip roots obtained with the instrument. It is possible to propose optimization alternatives in the manufacture of machined parts and the integrity of cutting tools.

scholarly journals Improving the Performance of Steel Machining Processes through Cutting by Vibration Control

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5712
Author(s):  
Mihaela Oleksik ◽  
Dan Dobrotă ◽  
Mădălin Tomescu ◽  
Valentin Petrescu
Keyword(s):  
Fourier Transformation ◽  
Vibration Analysis ◽  
Cutting Tool ◽  
Cutting Process ◽  
Manufacturing Processes ◽  
Machining Processes ◽  
Short Time ◽  
Short Time Fourier Transformation ◽  
Dynamic Phenomena

Machining processes through cutting are accompanied by dynamic phenomena that influence the quality of the processed surfaces. Thus, this research aimed to design, make, and use a tool with optimal functional geometry, which allowed a reduction of the dynamic phenomena that occur in the cutting process. In order to carry out the research, the process of cutting by front turning with transversal advance was taken into account. Additionally, semi-finished products with a diameter of Ø = 150 mm made of C45 steel were chosen for processing (1.0503). The manufacturing processes were performed with the help of two tools: a cutting tool, the classic construction version, and another that was the improved construction version. In the first stage of the research, an analysis was made of the vibrations that appear in the cutting process when using the two types of tools. Vibration analysis considered the following: use of the Fast Fourier Transform (FFT) method, application of the Short-Time Fourier-Transformation (STFT) method, and observation of the acceleration of vibrations recorded during processing. After the vibration analysis, the roughness of the surfaces was measured and the parameter Ra was taken into account, but a series of diagrams were also drawn regarding the curved profiles, filtered profiles, and Abbott–Firestone curve. The research showed that use of the tool that is the improved constructive variant allows accentuated reduction of vibrations correlated with an improvement of the quality of the processed surfaces.

Role of energy consumption, cutting tool and workpiece materials towards environmentally conscious machining: A comprehensive review

2019 ◽  
Vol 234 (3) ◽  
pp. 335-354 ◽  
Author(s):  
Salman Pervaiz ◽  
Sathish Kannan ◽  
Ibrahim Deiab ◽  
Hossam Kishawy
Keyword(s):  
Energy Consumption ◽  
Metal Cutting ◽  
Cutting Tool ◽  
Cutting Process ◽  
Machining Process ◽  
Workpiece Material ◽  
Tool Materials ◽  
Wide Range ◽  
Cutting Operation

Metal-cutting process deals with the removal of material using the shearing operation with the help of hard cutting tools. Machining operations are famous in the manufacturing sector due to their capability to manufacture tight tolerances and high dimensional accuracy while simultaneously maintaining the cost-effectiveness for higher production levels. As metal-cutting processes consume a great amount of input resources and generate some material-based waste streams, these processes are highly criticized due to their high and negative environmental impacts. Researchers in the metal-cutting sector are currently exploring and benchmarking different activities and best practices to make the cutting operation environment friendly in nature. These eco-friendly practices mainly cover the wide range of activities directly or indirectly associated with the metal-cutting operation. Most of the literature for sustainable metal-cutting activities revolves around the sustainable lubrication techniques to minimize the negative influence of cutting fluids on the environment. However, there is a need to enlarge the assessment domain for the metal-cutting process and other directly and indirectly associated practices such as enhancing sustainability through innovative methods for workpiece and cutting tool materials, and approaches to optimize energy consumption should also be explored. The aim of this article is to explore the role of energy consumption and the influence of workpiece and tool materials towards the sustainability of machining process. The article concludes that sustainability of the machining process can be improved by incorporating different innovative approaches related to the energy and tool–workpiece material consumptions.

Numerical Simulation of Metal Cutting Process Based on ANSYS/LS-DYNA

2015 ◽  
Vol 727-728 ◽  
pp. 335-338 ◽  
Author(s):  
Song Jie Yu ◽  
Di Di Wang ◽  
Xin Chen
Keyword(s):  
Cutting Force ◽  
Metal Cutting ◽  
Plastic Material ◽  
Orthogonal Cutting ◽  
Cutting Process ◽  
Machining Process ◽  
Linear Deformation ◽  
Deformation Problem ◽  
Non Linear ◽  
Elastic Plastic Material

Cutting process is a typical non-linear deformation problem, which involves material non-linear, geometry non-linear and the state non-linear problem. Based on the elastic-plastic material deformation theory, this theme established a strain hardening model. Build the simulation model of two-dimensional orthogonal cutting process of workpiece and tool by the finite element method (FEM), and simulate the changes of cutting force and the process of chip formation in the machining process, and analyzed the cutting force, the situation of chip deformation. The method is more efficient and effective than the traditional one, and provides a new way for metal cutting theory, research of material cutting performance and cutting tool product development.

Analysis of the Delamination in Drilling of Particle Board

2015 ◽  
Vol 818 ◽  
pp. 243-247 ◽  
Author(s):  
Krzysztof Szwajka
Keyword(s):  
Mathematical Models ◽  
Surface Quality ◽  
Analysis Of Variance ◽  
Cutting Parameters ◽  
Cutting Process ◽  
Machining Process ◽  
Particle Board ◽  
Cutting Surface ◽  
Tool Durability

Drilling is the most commonly used machining process in furniture industries. In this study the eighteen tests of tool durability for different values of the analyzed cutting parameters were carried out. Based on the results of investigations, the influence of selected parameters on the cutting surface quality was determined. Mathematical models based on analysis of variance (ANOVA), allowing to estimate the surface quality in the cutting process were proposed.

Sign in / Sign up

Export Citation Format

Share Document