scholarly journals Fabrication and Mechanical Testing of the Uniaxial Graded Auxetic Damper

Materials ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 387
Author(s):  
Hasan Al-Rifaie ◽  
Nejc Novak ◽  
Matej Vesenjak ◽  
Zoran Ren ◽  
Wojciech Sumelka
Keyword(s):  
Experimental Testing ◽  
Progressive Collapse ◽  
Cost Effective ◽  
Material Model ◽  
Deformation Pattern ◽  
Hardening Material ◽  
Dog Bone ◽  
Cost Effective Method ◽  
Deformation Properties ◽  
Auxetic Structures

Auxetic structures can be used as protective sacrificial solutions for impact protection with lightweight and excellent energy-dissipation characteristics. A recently published and patented shock-absorbing system, namely, Uniaxial Graded Auxetic Damper (UGAD), proved its efficiency through comprehensive analytical and computational analyses. However, the authors highlighted the necessity for experimental testing of this new damper. Hence, this paper aimed to fabricate the UGAD using a cost-effective method and determine its load–deformation properties and energy-absorption potential experimentally and computationally. The geometry of the UGAD, fabrication technique, experimental setup, and computational model are presented. A series of dog-bone samples were tested to determine the exact properties of aluminium alloy (AW-5754, T-111). A simplified (elastic, plastic with strain hardening) material model was proposed and validated for use in future computational simulations. Results showed that deformation pattern, progressive collapse, and force–displacement relationships of the manufactured UGAD are in excellent agreement with the computational predictions, thus validating the proposed computational and material models.

CAD Of Anticorrosive Protection Of Steel Structures

2019 ◽  
pp. 18-23
Keyword(s):  
Protective Coating ◽  
Computer Aided Design ◽  
Steel Structures ◽  
Cost Effective ◽  
Operating Conditions ◽  
Computational Tool ◽  
Protection Method ◽  
Cost Effective Method ◽  
The Cost ◽  
Aided Design

The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.

Monitoring effluent quality in hypertrophic wastewater reservoirs using remote sensing

1996 ◽  
Vol 33 (8) ◽  
pp. 23-29 ◽  
Author(s):  
I. Dor ◽  
N. Ben-Yosef
Keyword(s):  
Water Quality ◽  
Theoretical Model ◽  
Principal Component ◽  
Cost Effective ◽  
Operational Parameters ◽  
Effluent Quality ◽  
Optical Images ◽  
Routine Monitoring ◽  
Cost Effective Method ◽  
Wastewater Quality

About one hundred and fifty wastewater reservoirs store effluents for irrigation in Israel. Effluent qualities differ according to the inflowing wastewater quality, the degree of pretreatment and the operational parameters. Certain aspects of water quality like concentration of organic matter, suspended solids and chlorophyll are significantly correlated with the water column transparency and colour. Accordingly optical images of the reservoirs obtained from the SPOT satellite demonstrate pronounced differences correlated with the water quality. The analysis of satellite multispectral images is based on a theoretical model. The model calculates, using the radiation transfer equation, the volume reflectance of the water body. Satellite images of 99 reservoirs were analyzed in the chromacity space in order to classify them according to water quality. Principal Component Analysis backed by the theoretical model increases the method sensitivity. Further elaboration of this approach will lead to the establishment of a time and cost effective method for the routine monitoring of these hypertrophic wastewater reservoirs.

A Cost-Effective Method to Prepare Pure Vildagliptin

2013 ◽  
Vol 10 (3) ◽  
pp. 159-163 ◽  
Author(s):  
Jun Peng ◽  
Yue Feng ◽  
Zhu Tao ◽  
Yingjie Chen ◽  
Xiangnan Hu
Keyword(s):  
Cost Effective ◽  
Cost Effective Method

scholarly journals Computer-supported Detection of M-Components and Evaluation of Immunoglobulins after Capillary Electrophoresis

2001 ◽  
Vol 47 (1) ◽  
pp. 110-117 ◽  
Author(s):  
Magnus Jonsson ◽  
Joyce Carlson ◽  
Jan-Olof Jeppsson ◽  
Per Simonsson
Keyword(s):  
Capillary Electrophoresis ◽  
Decision Support ◽  
Protein Separation ◽  
Serum Proteins ◽  
Cost Effective ◽  
Clinical Samples ◽  
Serum Samples ◽  
Computerized Decision Support ◽  
Cost Effective Method ◽  
Mathematical Algorithms

Abstract Background: Electrophoresis of serum samples allows detection of monoclonal gammopathies indicative of multiple myeloma, Waldenström macroglobulinemia, monoclonal gammopathy of undetermined significance, and amyloidosis. Present methods of high-resolution agarose gel electrophoresis (HRAGE) and immunofixation electrophoresis (IFE) are manual and labor-intensive. Capillary zone electrophoresis (CZE) allows rapid automated protein separation and produces digital absorbance data, appropriate as input for a computerized decision support system. Methods: Using the Beckman Paragon CZE 2000 instrument, we analyzed 711 routine clinical samples, including 95 monoclonal components (MCs) and 9 cases of Bence Jones myeloma, in both the CZE and HRAGE systems. Mathematical algorithms developed for the detection of monoclonal immunoglobulins (MCs) in the γ- and β-regions of the electropherogram were tested on the entire material. Additional algorithms evaluating oligoclonality and polyclonal concentrations of immunoglobulins were also tested. Results: CZE electropherograms corresponded well with HRAGE. Only one IgG MC of 1 g/L, visible on HRAGE, was not visible after CZE. Algorithms detected 94 of 95 MCs (98.9%) and 100% of those visible after CZE. Of 607 samples lacking an MC on HRAGE, only 3 were identified by the algorithms (specificity, 99%). Algorithms evaluating total gammaglobulinemia and oligoclonality also identified several cases of Bence Jones myeloma. Conclusions: The use of capillary electrophoresis provides a modern, rapid, and cost-effective method of analyzing serum proteins. The additional option of computerized decision support, which provides rapid and standardized interpretations, should increase the clinical availability and usefulness of protein analyses in the future.

scholarly journals CO$$_{2}$$ Convection in Hydrocarbon Under Flowing Conditions

2021 ◽  
Author(s):  
Trine S. Mykkeltvedt ◽  
Sarah E. Gasda ◽  
Tor Harald Sandve
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Flow Behavior ◽  
Cost Effective ◽  
Fine Grid ◽  
Cost Effective Method ◽  
Gravity Effects ◽  
Petroleum Resources ◽  
Nearby Point ◽  
Diffusive Processes

AbstractCarbon-neutral oil production is one way to improve the sustainability of petroleum resources. The emissions from produced hydrocarbons can be offset by injecting capture CO$$_{2}$$ 2 from a nearby point source into a saline aquifer for storage or a producing oil reservoir. The latter is referred to as enhanced oil recovery (EOR) and would enhance the economic viability of CO$$_{2}$$ 2 sequestration. The injected CO$$_{2}$$ 2 will interact with the oil and cause it to flow more freely within the reservoir. Consequently, the overall recovery of oil from the reservoir will increase. This enhanced oil recovery (EOR) technique is perceived as the most cost-effective method for disposing captured CO$$_{2}$$ 2 emissions and has been performed for many decades with the focus on oil recovery. The interaction between existing oil and injected CO$$_{2}$$ 2 needs to be fully understood to effectively manage CO$$_{2}$$ 2 migration and storage efficiency. When CO$$_{2}$$ 2 and oil mix in a fully miscible setting, the density can change non-linearly and cause density instabilities. These instabilities involve complex convective-diffusive processes, which are hard to model and simulate. The interactions occur at the sub-centimeter scale, and it is important to understand its implications for the field scale migration of CO$$_{2}$$ 2 and oil. In this work, we simulate gravity effects, namely gravity override and convective mixing, during miscible displacement of CO$$_{2}$$ 2 and oil. The flow behavior due to the competition between viscous and gravity effects is complex, and can only be accurately simulated with a very fine grid. We demonstrate that convection occurs rapidly, and has a strong effect on breakthrough of CO$$_{2}$$ 2 at the outlet. This work for the first time quantifies these effects for a simple system under realistic conditions.

Fast and cost-effective method for non-contact respiration rate tracking using UWB impulse radar

2021 ◽  
pp. 112814
Author(s):  
Ibrahim Kakouche ◽  
Abdelmadjid Maali ◽  
Mohammed Nabil El Korso ◽  
Ammar Mesloub ◽  
Mohamed Salah Azzaz
Keyword(s):  
Respiration Rate ◽  
Cost Effective ◽  
Cost Effective Method

scholarly journals Rapid Detection and Quantification of Patulin and Citrinin Contamination in Fruits

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4545
Author(s):  
Sudharsan Sadhasivam ◽  
Omer Barda ◽  
Varda Zakin ◽  
Ram Reifen ◽  
Edward Sionov
Keyword(s):  
High Performance ◽  
Cost Effective ◽  
Hplc Method ◽  
Pear Fruit ◽  
Cost Effective Method ◽  
Fruit Samples ◽  
Pome Fruits ◽  
Reliable Methods ◽  
By Products ◽  
Detection And Quantification

Patulin (PAT) and citrinin (CTN) are the most common mycotoxins produced by Penicillium and Aspergillus species and are often associated with fruits and fruit by-products. Hence, simple and reliable methods for monitoring these toxins in foodstuffs are required for regular quality assessment. In this study, we aimed to establish a cost-effective method for detection and quantification of PAT and CTN in pome fruits, such as apples and pears, using high-performance liquid chromatography (HPLC) coupled with spectroscopic detectors without the need for any clean-up steps. The method showed good performance in the analysis of these mycotoxins in apple and pear fruit samples with recovery ranges of 55–97% for PAT and 84–101% for CTN, respectively. The limits of detection (LOD) of PAT and CTN in fruits were 0.006 µg/g and 0.001 µg/g, while their limits of quantification (LOQ) were 0.018 µg/g and 0.003 µg/g, respectively. The present findings indicate that the newly developed HPLC method provides rapid and accurate detection of PAT and CTN in fruits.

Sign in / Sign up

Export Citation Format

Share Document