scholarly journals Fabrication of Porous SiC by Direct Selective Laser Sintering Effect of Boron Carbide

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 737
Author(s):  
Rongzhen Liu ◽  
Gong Chen ◽  
Yudi Qiu ◽  
Peng Chen ◽  
Yusheng Shi ◽  
...  
Keyword(s):  
Silicon Carbide ◽  
Selective Laser Sintering ◽  
Minimum Energy ◽  
Laser Sintering ◽  
Extreme Conditions ◽  
Sintering Process ◽  
Application Performance ◽  
Chemical Corrosion ◽  
Porous Sic ◽  
Sintered Silicon

Additive manufactured porous SiC is a promising material applied in extreme conditions characterised by high temperatures, chemical corrosion, and irradiation etc. However, residual Si’s existence deteriorates its performance and limits its application in harsh environments. In this study, B4C was introduced into the selective laser sintering process of SiC, and its effects on forming ability, pore parameters, microstructure, and phases were investigated. The results showed that when B4C was added, the processing window was enlarged. The minimum energy density was reduced from 457 J/cm2 to 214 J/cm2 when the content of B4C reached 15 wt%. Microstructure orientation was enhanced, and the residual silicon content was decreased from 38 at.% to about 8 at.%. Small pores were turned into large pores with the increase of B4C addition. The findings indicate that the addition of B4C increases the amount of liquid phase during the laser sintering process of silicon carbide, improving the SiC struts’ density and reducing the residual silicon by reacting with it. Therefore, the addition of B4C will help improve the application performance of selected laser-sintered silicon carbide under extreme conditions.

scholarly journals Online Monitoring Based on Temperature Field Features and Prediction Model for Selective Laser Sintering Process

2018 ◽  
Vol 8 (12) ◽  
pp. 2383 ◽  
Author(s):  
Zhehan Chen ◽  
Xianhui Zong ◽  
Jing Shi ◽  
Xiaohua Zhang
Keyword(s):  
Temperature Field ◽  
Prediction Model ◽  
Selective Laser Sintering ◽  
Principal Component ◽  
Laser Sintering ◽  
Support Vector ◽  
Sintering Process ◽  
Metal Materials ◽  
Key Features ◽  
The Mathematical Model

Selective laser sintering (SLS) is an additive manufacturing technology that can work with a variety of metal materials, and has been widely employed in many applications. The establishment of a data correlation model through the analysis of temperature field images is a recognized research method to realize the monitoring and quality control of the SLS process. In this paper, the key features of the temperature field in the process are extracted from three levels, and the mathematical model and data structure of the key features are constructed. Feature extraction, dimensional reduction, and parameter optimization are realized based on principal component analysis (PCA) and support vector machine (SVM), and the prediction model is built and optimized. Finally, the feasibility of the proposed algorithms and model is verified by experiments.

Physical Modeling for Selective Laser Sintering Process

2017 ◽  
Vol 17 (2) ◽  
Author(s):  
Arash Gobal ◽  
Bahram Ravani
Keyword(s):  
Physical Modeling ◽  
Large Scale ◽  
Selective Laser Sintering ◽  
Powdered Material ◽  
Laser Sintering ◽  
Industrial Applications ◽  
Transient Temperature ◽  
Sintering Process ◽  
Powder Bed ◽  
Selective Heating

The process of selective laser sintering (SLS) involves selective heating and fusion of powdered material using a moving laser beam. Because of its complicated manufacturing process, physical modeling of the transformation from powder to final product in the SLS process is currently a challenge. Existing simulations of transient temperatures during this process are performed either using finite-element (FE) or discrete-element (DE) methods which are either inaccurate in representing the heat-affected zone (HAZ) or computationally expensive to be practical in large-scale industrial applications. In this work, a new computational model for physical modeling of the transient temperature of the powder bed during the SLS process is developed that combines the FE and the DE methods and accounts for the dynamic changes of particle contact areas in the HAZ. The results show significant improvements in computational efficiency over traditional DE simulations while maintaining the same level of accuracy.

Experimental Study on Warping Height of PA12/HDPE Specimen by Selective Laser Sintering

2010 ◽  
Vol 43 ◽  
pp. 430-433
Author(s):  
Nai Fei Ren ◽  
Pan Wang ◽  
Yan Luo ◽  
Hui Juan Wu
Keyword(s):  
Process Parameters ◽  
Selective Laser Sintering ◽  
Single Layer ◽  
Dimensional Accuracy ◽  
Laser Sintering ◽  
Sintering Process ◽  
Influence Of Process Parameters ◽  
Optimum Parameters ◽  
Scan Speed ◽  
The Relationship

The dimensional accuracy and mechanics properties of parts made by Selective Laser Sintering depend greatly on the sintering process parameters. The influence of process parameters on warping weight of parts sintered by blends of polyamide (PA12) and high density polyethylene (HDPE) was studied. The relationship between the process parameters and the warping height was presented. The surface morphology of the part and uniformity of powder mixed were analyzed by SEM. The optimum parameters of minimum warping height were obtained: preheat temperature 110°C, scan speed 300mm/s, laser power 21W, thickness of single layer 0.2mm.

scholarly journals Process Optimization Variables for Direct Metal Laser Sintering

2015 ◽  
Vol 15 (4) ◽  
pp. 38-51 ◽  
Author(s):  
Ż. A. Mierzejewska
Keyword(s):  
Selective Laser Sintering ◽  
Minimum Energy ◽  
Systems Design ◽  
Laser Sintering ◽  
Physical Models ◽  
Cad Model ◽  
Direct Metal Laser Sintering ◽  
3D Cad ◽  
Short Period ◽  
Wide Range

AbstractManufacturing is crucial to creation of wealth and provision of quality of life. Manufacturing covers numerous aspects from systems design and organization, technology and logistics, operational planning and control. The study of manufacturing technology is usually classified into conventional and non-conventional processes. As it is well known, the term "rapid prototyping" refers to a number of different but related technologies that can be used for building very complex physical models and prototype parts directly from 3D CAD model. Among these technologies are selective laser sintering (SLS) and direct metal laser sintering (DMLS). RP technologies can use wide range of materials which gives possibility for their application in different fields. RP has primary been developed for manufacturing industry in order to speed up the development of new products (prototypes, concept models, form, fit, and function testing, tooling patterns, final products - direct parts). Sintering is a term in the field of powder metallurgy and describes a process which takes place under a certain pressure and temperature over a period of time. During sintering particles of a powder material are bound together in a mold to a solid part. In selective laser sintering the crucial elements pressure and time are obsolete and the powder particles are only heated for a short period of time. SLS uses the fact that every physical system tends to achieve a condition of minimum energy. In the case of powder the partially melted particles aim to minimize their in comparison to a solid block of material enormous surface area through fusing their outer skins. Like all generative manufacturing processes laser sintering gains the geometrical information out of a 3D CAD model. This model is subdivided into slices or layers of a certain layer thickness. Following this is a revolving process which consists of three basic process steps: recoating, exposure, and lowering of the build platform until the part is finished completely.

Sign in / Sign up

Export Citation Format

Share Document