scholarly journals Basic Tool Design Guidelines for Friction Stir Welding of Aluminum Alloys

Metals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 2042
Author(s):  
Elizabeth Hoyos ◽  
María Camila Serna
Keyword(s):  
Friction Stir Welding ◽  
Solid State ◽  
Aluminum Alloys ◽  
Welding Process ◽  
Design Guidelines ◽  
Fusion Welding ◽  
Basic Tool ◽  
Friction Stir ◽  
Shoulder Diameter ◽  
Welding Consumables

Friction Stir Welding (FSW) is a solid-state welding process that has multiple advantages over fusion welding. The design of tools for the FSW process is a factor of interest, considering its fundamental role in obtaining sound welds. There are some commercially available alternatives for FSW tools, but unlike conventional fusion welding consumables, their use is limited to very specific conditions. In this work, equations to act as guidelines in the design process for FSW tools are proposed for the 2XXX, 5XXX, 6XXX, and 7XXX aluminum series and any given thickness to determine: pin length, pin diameter, and shoulder diameter. Over 80 sources and 200 tests were used and detailed to generate these expressions. As a verification approach, successful welds by authors outside the scope of the original review and the tools used were evaluated under this development and used as case studies or verification for the guidelines. Variations between designs made using the guidelines and those reported by other researchers remain under 21%.

Tensile Properties and Microstructure of Friction Stir Welded Joints 2195-T8 Aluminum Alloy

2016 ◽  
Vol 835 ◽  
pp. 191-196 ◽  
Author(s):  
Kookil No ◽  
Ye Rim Lee ◽  
Jong Hoon Yoon ◽  
Joon Tae Yoo ◽  
Ho Sung Lee
Keyword(s):  
Aluminum Alloy ◽  
Friction Stir Welding ◽  
Aluminum Alloys ◽  
Welding Process ◽  
Tensile Tests ◽  
Fusion Welding ◽  
Homogeneous Microstructure ◽  
Rotating Speed ◽  
Friction Stir ◽  
Reactive Property

Friction stir welding is a widely used welding process for aluminum alloys because it avoids many of the problems of conventional fusion welding. This process is beneficial especially for lithium containing aluminum alloys in which the reactive property of element Li causes porosity and hot cracking during melting and solidification. In friction stir welding process, each region undergoes different thermo-mechanical cycles and produces a non-homogeneous microstructure. In the present study, the mechanical properties and microstructure of a 2195-T8 aluminum alloy joined with friction stir welding were investigated. The change in microstructure across the welded joint was found to correspond to microhardness measurement. The microstructure was characterized by the presence of severely deformed grains and fine recrystallized grains depending on the region. Tensile tests shows the optimum condition was obtained at the tool rotating speed of 600rpm and the traveling speed range from 180 to 300mm/min.

scholarly journals HARDNESS AND TENSILE BEHAVIOR OF FRICTION STIR WELDED ALUMINUM AA6351 ALLOY

2014 ◽  
Vol 44 (1) ◽  
pp. 23-26
Author(s):  
G. Gopala Krishna ◽  
P. Ram Reddy ◽  
M. Manzoor Hussain
Keyword(s):  
Friction Stir Welding ◽  
Solid State ◽  
Rolling Direction ◽  
Welding Process ◽  
Fusion Welding ◽  
Frictional Heat ◽  
Work Piece ◽  
Friction Stir ◽  
Superior Mechanical Properties ◽  
Transverse Weld

Friction Stir Welding (FSW) is a solid state welding process gaining more applications in various industries due to better quality of the joint as it has no effect on parent metal. In FSW process a non consumable rotating welding tool is used to generate frictional heat between tool and abutting surface of work piece and plastic dissipation of energy to accomplish the weld. Being a solid state joining process, friction stir welding process offers various advantages like low distortion, absence of melt related defects, high joint strength etc. as compared to other conventional fusion welding techniques.Experiments were conducted on 6 mm thickness Aluminum AA6351-T4, commercially available plates. The seplates are joined by FSW along the rolling direction (longitudinal weld orientation) and across the rolling direction (transverse weld orientation). The hardness and tensile strength results of the weldments are presented. Results show superior mechanical properties for the joints with plates along the rolling direction as compared with the joints obtained by across the rolling direction.DOI: http://dx.doi.org/10.3329/jme.v44i1.19494

scholarly journals Investigations on Friction Stir Welding to Improve Aluminum Alloys

2021 ◽  
Author(s):  
Bazani Shaik ◽  
Gosala Harinath Gowd ◽  
Bandaru Durga Prasad
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Aluminum Alloys ◽  
Coefficient Of Thermal Expansion ◽  
Research Work ◽  
Weight Ratio ◽  
Welding Process ◽  
Industrial Applications ◽  
Fusion Welding ◽  
Friction Stir

Today is an era of metals including Aluminum alloys owing to a fundamental paradigm shift in research objectives. In addition to superior performance and lightweight criteria that are used to define the innovations of yore, scientists today are compelled to take into consideration the environment-friendliness of the new and novel materials being developed due to the concerns of maintaining a sustainable and safe existence. The solid-state Friction stir welding process has immense potential in the areas of automobiles, aerospace and construction industries due to its overwhelming advantages over the conventional fusion welding process of aluminum alloys. The thesis presents an experimental investigation of friction stir welding of dissimilar aluminum alloys AA7075T651 and AA6082T651. Mathematical modeling equations are developed to predict the tensile strength, impact strength, elongation, and micro-hardness of the dissimilar FSW joints AA7075T651 and AA6082T651. The process parameters are optimized for maximum tensile strength and hardness values. Post weld heat treatment is conducted and the metallurgical properties of the FS welded AA7075T651 and AA6082T651 are presented for different combinations of tool rotational speeds. Aluminum and its alloys are widely used in nonferrous alloys for many industrial applications. Aluminum exhibits a combination of an excellent mechanical strength with lightweight and thus it is steadily replacing steel in industrial applications where the strength to weight ratio plays a significant role. In conventional welding, the joining of aluminum is mainly associated with a high coefficient of thermal expansion, solidification shrinkage and dissolution of harmful gases in the molten metal during welding. The weld joints are also associated with segregation of secondary alloys and porosities which are detrimental to the joint qualities. Friction Stir Welding (FSW) and Friction Welding (FW) are the most popular emerging solid welding techniques in aircraft and shipbuilding industries. FSW is mainly used for the joining of metal plates and FW is mainly used for the joining of rods. Both techniques are suitable for high strength material having less weight. These techniques are environmentally friendly and easy to execute. Hence, the study of these techniques can contribute much to the field of green technology. This research work is dealt with the experimental and numerical investigations on FSW and FW of aluminum alloys.

scholarly journals Identifying Combination of Friction Stir Welding Parameters to Maximize Strength of Lap Joints of AA2014-T6 Aluminum Alloy

2017 ◽  
Vol 37 (1) ◽  
pp. 6-21 ◽  
Author(s):  
C. Rajendrana ◽  
K. Srinivasan ◽  
V. Balasubramanian ◽  
H. Balaji ◽  
P. Selvaraj
Keyword(s):  
Tensile Strength ◽  
Aluminum Alloy ◽  
Friction Stir Welding ◽  
Aluminum Alloys ◽  
Weight Ratio ◽  
Welding Process ◽  
Lap Joints ◽  
Fusion Welding ◽  
Welding Parameters ◽  
Friction Stir

AbstractAA2014 aluminum alloy (Al-Cu alloy) has been widely utilized in fabrication of lightweight structures like aircraft structures, demanding high strength to weight ratio and good corrosion resistance. The fusion welding of these alloys will lead to solidification problems such as hot cracking. Friction stir welding is a new solid state welding process, in which the material being welded does not melt and recast. Lot of research works have been carried out by many researchers to optimize process parameters and establish empirical relationships to predict tensile strength of friction stir welded butt joints of aluminum alloys. However, very few investigations have been carried out on friction stir welded lap joints of aluminum alloys. Hence, in this investigation, an attempt has been made to optimize friction stir lap welding (FSLW) parameters to attain maximum tensile strength using statistical tools such as design of experiment (DoE), analysis of variance (ANOVA), response graph and contour plots. By this method, it is found that maximum tensile shear fracture load of 12.76 kN can be achieved if a joint is made using tool rotational speed of 900 rpm, welding speed of 110 mm/min, tool shoulder diameter of 12 mm and tool tilt angle of 1.5°.

scholarly journals The Effects of In-Process Cooling during Friction Stir Welding of 7475 Aluminium Alloy

2021 ◽  
Vol 50 (9) ◽  
pp. 2743-2754
Author(s):  
Ashish Jacob ◽  
Sachin Maheshwari ◽  
Arshad Noor Siddiquee ◽  
Abdulrahman Al-Ahmari ◽  
Mustufa Haider Abidi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Welded Joints ◽  
Positive Impact ◽  
Welding Process ◽  
Fusion Welding ◽  
Friction Stir ◽  
Cooling Conditions ◽  
Zero Degree ◽  
Welding Technique

Certain age hardenable alloys such as AA7475 cannot be joined with perfection using fusion welding techniques. This requires non-conventional welding technique such as friction stir welding process to join these ‘difficult to weld’ alloys. In this study, three different cooling conditions i.e. cryogenic, sub-zero, and zero-degree Celsius temperature conditions have been analyzed to understand its impact on the welding process. In-process cooling was found to behave effectively and also enhanced the mechanical properties of the welded joints. A stable microstructure was clearly seen in the images observed under the metallurgical microscope. The weld efficiencies were found to be good in each of the samples which are indicative of a strong metallic joint. The effective cooling conditions employed had an overall positive impact on the joint.

scholarly journals Friction stir welding of Aluminium matrix composites – A Review

2018 ◽  
Vol 144 ◽  
pp. 03002 ◽  
Author(s):  
Prabhu Subramanya ◽  
Murthy Amar ◽  
Shettigar Arun ◽  
Herbert Mervin ◽  
Rao Shrikantha
Keyword(s):  
Friction Stir Welding ◽  
Welding Process ◽  
Fusion Welding ◽  
Aluminium Matrix ◽  
Future Research ◽  
Matrix Composites ◽  
Aluminium Matrix Composites ◽  
Friction Stir ◽  
Tool Profiles ◽  
Welding Technique

Friction stir welding (FSW) is established as one of the prominent welding techniques to join aluminium matrix composites (AMCs). It is a solid state welding process, takes place well below the melting temperature of the material, eliminates the detrimental effects of conventional fusion welding process. Although the process is capable to join AMCs, challenges are still open that need to be fulfill to widen its applications. This paper gives the outline of the friction stir welding technique used to join AMCs. Effect of process variables on the microstructure and mechanical properties of the joints, behavior of reinforcing materials during welding, effect of tool profiles on the joint strength are discussed in detail. Few improvements and direction for future research are also proposed.

Effect of Tool pin Profile and Axial Force on Tensile Behavior in Friction Stir Welding of Dissimilar Aluminum Alloys

2011 ◽  
Vol 415-417 ◽  
pp. 1140-1146 ◽  
Author(s):  
R. Palanivel ◽  
P. Koshy Mathews ◽  
M. Balakrishnan ◽  
I. Dinaharan ◽  
N. Murugan
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Axial Force ◽  
Aluminium Alloys ◽  
Welding Process ◽  
Fusion Welding ◽  
Friction Stir ◽  
Tool Pin Profile ◽  
Dissimilar Aluminum Alloys ◽  
Tool Pin

Aluminium alloys generally has low weldability by traditional fusion welding process. The development of the Friction Stir Welding (FSW) has provided an alternative improved way of producing aluminium joints, in a faster and reliable manner. FSW process has several advantages, in particular the possibility to weld dissimilar aluminium alloys. This study focuses on the behavior of tensile strength of dissimilar joints of AA6351-T6 alloy to AA5083-H111 alloy produced by friction stir welding was analysed. Five different tool pin profile such as Straight Square (SS), Tapered Square (TS), Straight Hexagon (SH), Straight Octagon (SO) and Tapered Octagon (TO) with three different axial force (1tonne, 1.5tonne, 2 tonne) have been used to weld the joints. The effect of pin profiles and axial force on tensile properties and material flow behaviour of the joint was analyzed and it was found that the straight square pin profile with 1.5 tonne produced better tensile strength then other tool pin profile and axial force.

Influence of Tool Rotational Speed on the Mechanical Properties of Friction Stir Welded Al-Cu-Li Alloy

2016 ◽  
Vol 857 ◽  
pp. 228-231
Author(s):  
Ho Sung Lee ◽  
Ye Rim Lee ◽  
Kyung Ju Min
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Space Shuttle ◽  
Welding Process ◽  
High Strength ◽  
Fusion Welding ◽  
Welding Parameters ◽  
Friction Stir ◽  
Mechanical And Microstructural Properties ◽  
Tool Rotation

Aluminum-Lithium alloys have been found to exhibit superior mechanical properties as compared to the conventional aerospace aluminum alloys in terms of high strength, high modulus, low density, good corrosion resistance and fracture toughness at cryogenic temperatures. Even though they do not form low-melting eutectics during fusion welding, there are still problems like porosity, solidification cracking, and loss of lithium. This is why solid state friction stir welding is important in this alloy. It is known that using Al-Cu-Li alloy and friction stir welding to super lightweight external tank for space shuttle, significant weight reduction has been achieved. The objective of this paper is to investigate the effect of friction stir tool rotation speed on mechanical and microstructural properties of Al-Cu-Li alloy. The plates were joined with friction stir welding process using different tool rotation speeds (300-800 rpm) and welding speeds (120-420 mm/min), which are the two prime welding parameters in this process.

Sign in / Sign up

Export Citation Format

Share Document