scholarly journals Transwell Insert-Embedded Microfluidic Devices for Time-Lapse Monitoring of Alveolar Epithelium Barrier Function under Various Stimulations

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 406
Author(s):  
Shu-Han Chang ◽  
Ping-Liang Ko ◽  
Wei-Hao Liao ◽  
Chien-Chung Peng ◽  
Yi-Chung Tung
Keyword(s):  
Cell Culture ◽  
Barrier Function ◽  
Alveolar Epithelium ◽  
Time Lapse ◽  
Liquid Interface ◽  
Type I ◽  
Transwell Insert ◽  
Junction Protein ◽  
Air Liquid Interface

This paper reports a transwell insert-embedded microfluidic device capable of culturing cells at an air-liquid interface (ALI), mimicking the in vivo alveolar epithelium microenvironment. Integration of a commercially available transwell insert makes the device fabrication straightforward and eliminates the tedious device assembly processes. The transwell insert can later be detached from the device for high-resolution imaging of the cells. In the experiments, the cells showing type-I pneumocyte markers are exploited to construct an in vitro alveolar epithelium model, and four culture conditions including conventional liquid/liquid culture (LLC) and air–liquid interface (ALI) cell culture in normal growth medium, and ALI cell culture with inflammatory cytokine (TNF-α) stimulation and ethanol vapor exposure are applied to investigate their effects on the alveolar epithelium barrier function. The barrier permeability is time-lapse monitored using trans-epithelial electrical resistance (TEER) measurement and immunofluorescence staining of the tight junction protein (ZO-1). The results demonstrate the functionalities of the device, and further show the applications and advantages of the constructed in vitro cell models for the lung studies.

scholarly journals Preliminary Study of In Vitro Three-Dimensional Skin Model Using an Ovine Collagen Type I Sponge Seeded with Co-Culture Skin Cells: Submerged versus Air-Liquid Interface Conditions

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2784
Author(s):  
Mh Busra Fauzi ◽  
Zahra Rashidbenam ◽  
Aminuddin Bin Saim ◽  
Ruszymah Binti Hj Idrus
Keyword(s):  
Collagen Type ◽  
Three Dimensional ◽  
Collagen Type I ◽  
Liquid Interface ◽  
Type I ◽  
Skin Model ◽  
Skin Cells ◽  
Air Liquid Interface ◽  
In Vitro Skin Model

Three-dimensional (3D) in vitro skin models have been widely used for cosmeceutical and pharmaceutical applications aiming to reduce animal use in experiment. This study investigate capability of ovine tendon collagen type I (OTC-I) sponge suitable platform for a 3D in vitro skin model using co-cultured skin cells (CC) containing human epidermal keratinocytes (HEK) and human dermal fibroblasts (HDF) under submerged (SM) and air-liquid interface (ALI) conditions. Briefly, the extracted OTC-I was freeze-dried and crosslinked with genipin (OTC-I_GNP) and carbodiimide (OTC-I_EDC). The gross appearance, physico-chemical characteristics, biocompatibility and growth profile of seeded skin cells were assessed. The light brown and white appearance for the OTC-I_GNP scaffold and other groups were observed, respectively. The OTC-I_GNP scaffold demonstrated the highest swelling ratio (~1885%) and water uptake (94.96 ± 0.14%). The Fourier transformation infrared demonstrated amide A, B and I, II and III which represent collagen type I. The microstructure of all fabricated sponges presented a similar surface roughness with the presence of visible collagen fibers and a heterogenous porous structure. The OTC-I_EDC scaffold was more toxic and showed the lowest cell attachment and proliferation as compared to other groups. The micrographic evaluation revealed that CC potentially formed the epidermal- and dermal-like layers in both SM and ALI that prominently observed with OTC-I_GNP compared to others. In conclusion, these results suggest that OTC_GNP could be used as a 3D in vitro skin model under ALI microenvironment.

scholarly journals PHAIR – A biosensor for pH measurement in air-liquid interface

2020 ◽  
Author(s):  
Mohammadhossein Dabaghi ◽  
Neda Saraei ◽  
Gang Xu ◽  
Abiram Chandiramohan ◽  
Jonas Yeung ◽  
...  
Keyword(s):  
Cell Culture ◽  
Culture Media ◽  
Silver Chloride ◽  
Reference Electrode ◽  
Airway Epithelial Cells ◽  
Liquid Interface ◽  
Small Scale ◽  
Human Airway ◽  
Air Liquid Interface

1AbstractIn many biological systems, pH can be used as a parameter to understand and study cell dynamics. However, measuring pH in live cell culture is limited by the sensor ion specificity, proximity to the cell surface, and scalability. Commercially available pH sensors are difficult to integrate into a small-scale cell culture system due to their size and are not cost-effective for disposable use. We made PHAIR - a new pH sensor that uses a micro-wire format to measure pH in vitro human airway cell culture. Tungsten micro-wires were used as the working electrodes, and silver micro-wires with a silver/silver chloride coating were used as a pseudo reference electrode. pH sensitivity, in a wide and narrow range, and stability of these sensors were tested in common standard buffer solutions as well as in culture media of human airway epithelial cells grown at the air-liquid interface in a 24 well cell culture plate. When measuring the pH of cells grown under basal and challenging conditions using PHAIR, cell viability and cytokine responses were not affected. Our results confirm that micro-wires-based sensors have the capacity for miniaturization, and detection of diverse ions while maintaining sensitivity. This suggests the broad application of PHAIR in various biological experimental settings.

scholarly journals PHAIR: a biosensor for pH measurement in air–liquid interface cell culture

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammadhossein Dabaghi ◽  
Neda Saraei ◽  
Gang Xu ◽  
Abiram Chandiramohan ◽  
Jonas Yeung ◽  
...  
Keyword(s):  
Cell Culture ◽  
Culture Media ◽  
Silver Chloride ◽  
Reference Electrode ◽  
Airway Epithelial Cells ◽  
Liquid Interface ◽  
Small Scale ◽  
Human Airway ◽  
Air Liquid Interface

AbstractIn many biological systems, pH can be used as a parameter to understand and study cell dynamics. However, measuring pH in live cell culture is limited by the sensor ion specificity, proximity to the cell surface, and scalability. Commercially available pH sensors are difficult to integrate into a small-scale cell culture system due to their size and are not cost-effective for disposable use. We made PHAIR—a new pH sensor that uses a micro-wire format to measure pH in vitro human airway cell culture. Tungsten micro-wires were used as the working electrodes, and silver micro-wires with a silver/silver chloride coating were used as a pseudo reference electrode. pH sensitivity, in a wide and narrow range, and stability of these sensors were tested in common standard buffer solutions as well as in culture media of human airway epithelial cells grown at the air–liquid interface in a 24 well cell culture plate. When measuring the pH of cells grown under basal and challenge conditions using PHAIR, cell viability and cytokine responses were not affected. Our results confirm that micro-wire-based sensors have the capacity for miniaturization and detection of diverse ions while maintaining sensitivity. This suggests the broad application of PHAIR in various biological experimental settings.

scholarly journals PHAIR – A Biosensor for pH Measurement in Air-liquid Interface

2020 ◽  
Author(s):  
Mohammadhossein Dabaghi ◽  
Neda Saraei ◽  
Gang Xu ◽  
Abiram Chandiramohan ◽  
Jonas Yeung ◽  
...  
Keyword(s):  
Cell Culture ◽  
Culture Media ◽  
Silver Chloride ◽  
Reference Electrode ◽  
Airway Epithelial Cells ◽  
Liquid Interface ◽  
Small Scale ◽  
Human Airway ◽  
Air Liquid Interface

Abstract In many biological systems, pH can be used as a parameter to understand and study cell dynamics. However, measuring pH in live cell culture is limited by the sensor ion specificity, proximity to the cell surface, and scalability. Commercially available pH sensors are difficult to integrate into a small-scale cell culture system due to their size and are not cost-effective for disposable use. We made PHAIR - a new pH sensor that uses a micro-wire format to measure pH in vitro human airway cell culture. Tungsten micro-wires were used as the working electrodes, and silver micro-wires with a silver/silver chloride coating were used as a pseudo reference electrode. pH sensitivity, in a wide and narrow range, and stability of these sensors were tested in common standard buffer solutions as well as in culture media of human airway epithelial cells grown at the air-liquid interface in a 24 well cell culture plate. When measuring the pH of cells grown under basal and challenging conditions using PHAIR, cell viability and cytokine responses were not affected. Our results confirm that micro-wires-based sensors have the capacity for miniaturization, and detection of diverse ions while maintaining sensitivity. This suggests the broad application of PHAIR in various biological experimental settings.

Zwischen Luft und Wasser – Air-Liquid-Interface-Kulturen als In-vitro-Modell des Respirationstrakts

2020 ◽  
Author(s):  
S. Runft ◽  
L. Burigk ◽  
A. Lehmbecker ◽  
K. Schöne ◽  
D. Waschke ◽  
...  
Keyword(s):  
Liquid Interface ◽  
Air Liquid Interface

scholarly journals Laminin-driven Epac/Rap1 regulation of epithelial barriers on decellularized matrix

2019 ◽  
Author(s):  
Bethany M. Young ◽  
Keerthana Shankar ◽  
Cindy K. Tho ◽  
Amanda R. Pellegrino ◽  
Rebecca L. Heise
Keyword(s):  
Barrier Function ◽  
Cellular Response ◽  
Alveolar Epithelium ◽  
Epithelial Barrier ◽  
Epithelial Barrier Function ◽  
Main Challenge ◽  
Barrier Formation ◽  
Epithelial Barriers ◽  
Molecular Therapeutic

ABSTRACTDecellularized tissues offer a unique tool for developing regenerative biomaterials orin vitroplatforms for the study of cell-extracellular matrix (ECM) interactions. One main challenge associated with decellularized lung tissue is that ECM components can be stripped away or altered by the detergents used to remove cellular debris. Without characterizing the composition of lung decellularized ECM (dECM) and the cellular response caused by the altered composition, it is difficult to utilize dECM for regeneration and specifically, engineering the complexities of the alveolar-capillary barrier. This study takes steps towards uncovering if dECM must be enhanced with lost ECM proteins to achieve proper epithelial barrier formation. To achieve this, epithelial barrier function was assessed on dECM coatings with and without the systematic addition of several key basement membrane proteins. After comparing barrier function on collagen, fibronectin, laminin, and dECM in varying combinations as anin vitrocoating, the alveolar epithelium exhibited superior barrier function when dECM was supplemented with laminin as evidenced by trans-epithelial electrical resistance (TEER) and permeability assays. Increased barrier resistance with laminin addition was associated with upregulation of Claudin-18, E- cadherin, and junction adhesion molecule (JAM)-A, and stabilization of zonula occludens (ZO)-1 at junction complexes. The Epac/Rap1 pathway was observed to play a role in the ECM-mediated barrier function determined by protein expression and Epac inhibition. These findings reveal potential ECM coatings and molecular therapeutic targets for improved regeneration with decellularized scaffolds or edema related pathologies.

Mechanisms and regulation of ion transport in adult mammalian alveolar type II pneumocytes

1991 ◽  
Vol 261 (5) ◽  
pp. C727-C738 ◽  
Author(s):  
S. Matalon
Keyword(s):  
Epithelial Transport ◽  
Cultured Cells ◽  
Basolateral Membrane ◽  
Alveolar Epithelium ◽  
Alveolar Type ◽  
Type I ◽  
Type Ii ◽  
Epithelial Lining ◽  
Epithelial Lining Fluid

The adult alveolar epithelium consists of type I and type II (ATII) pneumocytes that form a tight barrier, which severely restricts the entry of lipid-insoluble molecules from the interstitial to the alveolar space. Current in vivo and in vitro evidence indicates that the alveolar epithelium is also an absorptive epithelium, capable of transporting Na+ from the alveolar lumen, which is bathed by a small amount of epithelial lining fluid, to the interstitial space. The in situ localization of Na(+)-K(+)-ATPase activity in ATII cells and the fact that these cells are involved in a number of crucial functions, such as surfactant secretion and alveolar remodeling after injury, led investigators to examine their transport characteristics. Radioactive flux studies, in both freshly isolated and cultured cells, and bioelectric measurements in ATII cells grown on porous supports indicate that they transport Na+ according to the Koefoed-Johnsen and Ussing model of epithelial transport. Na+ enters the apical membrane, because of the favorable electrochemical gradient, through Na+ cotransporters, a Na(+)-H+ antiport, and cation channels and is pumped across the basolateral membrane by a ouabain-sensitive Na(+)-K+ pump. Na+ transport is enhanced by substances that increase intracellular adenosine 3',5'-cyclic monophosphate. In addition to Na+ transporters, ATII cells contain several transporters that regulate their intracellular pH, including a H(+)-ATPase, which may explain the low pH of the epithelial lining fluid. The absorptive properties of ATII cells may play an important role in regulating the degree of alveolar fluid in health and disease.

Sign in / Sign up

Export Citation Format

Share Document