scholarly journals Automated Gold Grain Counting. Part 1: Why Counts Matter!

Minerals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 337
Author(s):  
Réjean Girard ◽  
Jonathan Tremblay ◽  
Alexandre Néron ◽  
Hugues Longuépée
Keyword(s):  
Gold Deposit ◽  
Gold Deposits ◽  
Qualitative Assessment ◽  
Improved Method ◽  
Complex Signals ◽  
Visual Identification ◽  
Order Of Magnitude ◽  
Automated Scanning ◽  
Improved Methods

The quantitative and qualitative assessment of gold grains from samples of glacial till is a well-established method for exploring gold deposits hidden under glaciated cover. This method, which is widely used in the industry and has resulted in numerous successes in locating gold deposits in glaciated terrain, is still based on artisanal gravity separation techniques and visual identification. However, being artisanal, it is limited by inconsistent recoveries and difficulties associated with visually identifying the predominantly small gold grains. These limitations hinder its capacity to decipher subtle or complex signals. To improve detection limits through the recovery of small gold grains, a new approach has recently been introduced into the industry, which is commercially referred to as the “ARTGold” procedure. This procedure involves the use of an optimized miniature sluice box coupled with an automated scanning electron microscopy routine. The capabilities of this improved method were highlighted in this study by comparing till surveys conducted around the Borden gold deposit (Ontario, Canada) using the conventional and improved methods at both local and regional scales. Relative to that with the conventional approach, the improved method increased the recovery of gold grains from samples (regional and down-ice mineralization) by almost one order of magnitude. (regional and down-ice mineralization), dominantly in regard of the small size fractions. Increasing the counts in low-abundance regional samples allows for a better discrimination between background signals and significant dispersions. The described method offers an alternative for improving the characterization of gold dispersal in glaciated terrain and related gold deposit footprints.

scholarly journals Automated Gold Grain Counting. Part 1: Why Counts Matter!

2021 ◽  
Author(s):  
Réjean Girard ◽  
Jonathan Trembaly ◽  
Alexandre Néron ◽  
Hugues Longuépée
Keyword(s):  
Gold Deposit ◽  
Gold Deposits ◽  
Qualitative Assessment ◽  
Complex Signal ◽  
Improved Method ◽  
Visual Identification ◽  
Order Of Magnitude ◽  
Automated Scanning ◽  
Improved Methods

The quantitative and qualitative assessment of gold grains from samples of glacial till is a well-established method for exploring gold deposits hidden under glaciated cover. This method, widely used by the industry and which produced numerous successes in locating gold deposits in glaciated terrain, is still based on artisanal gravity separation techniques and visual identification. However, being artisanal, it is limited by inconsistent recoveries and the difficulty to visually identify the predominantly occurring small gold grains. These limitations hinder its capability to deceipher subtle or complex signal. To improve detection limits through recovery of small gold grains, a new approach has recently been introduced in the industry (commercially referred as “ARTGold” procedure) using an optimized miniature sluice box coupled with an automated scanning electron microscopy routine. The capabilities of this improved method are highlighted by comparing till surveys conducted around the Borden gold deposit (Ontario, Canada) using the conventional and improved methods at both local and regional scales. Relative to the conventional approach, the improved method recovered almost one order of magnitude more gold grains from samples (regional and down-ice mineralization), dominantly in small size fractions. Increasing the counts in low-abundance regional samples enables better discrimination between background signals and significant dispersions. The method offers an alternative to improve characterization of gold dispersal in glaciated terrain and the related gold deposit footprints.

scholarly journals Genesis of the Late Cretaceous Longquanzhan Gold Deposit in the Central Tan-Lu Fault Zone, Shandong Province, China: Constraints from Noble Gas and Sulfur Isotopes

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 250
Author(s):  
Chuanpeng Liu ◽  
Wenjie Shi ◽  
Junhao Wei ◽  
Huan Li ◽  
Aiping Feng ◽  
...  
Keyword(s):  
Gold Deposit ◽  
Fault Zone ◽  
Late Cretaceous ◽  
Genetic Model ◽  
Gold Mineralization ◽  
Sulfur Isotopes ◽  
Noble Gas ◽  
Gold Deposits ◽  
Shandong Province ◽  
Magma Sources

The Longquanzhan deposit is one of the largest gold deposits in the Yi-Shu fault zone (central section of the Tan-Lu fault zone) in Shandong Province, China. It is an altered-rock type gold deposit in which ore bodies mainly occur at the contact zone between the overlying Cretaceous rocks and the underlying Neoarchean gneissic monzogranite. Shi et al. reported that this deposit formed at 96 ± 2 Ma using pyrite Rb–Sr dating method and represents a new gold mineralization event in the Shandong Province in 2014. In this paper, we present new He–Ar–S isotopic compositions to further decipher the sources of fluids responsible for the Longquanzhan gold mineralization. The results show that the δ34S values of pyrites vary between 0.9‰ and 4.4‰ with an average of 2.3‰. Inclusion-trapped fluids in ore sulfides have 3He/4He and 40Ar/36Ar ratios of 0.14–0.78 Ra and 482–1811, respectively. These isotopic data indicate that the ore fluids are derived from a magmatic source, which is dominated by crustal components with minor mantle contribution. Air-saturated water may be also involved in the hydrothermal system during the magmatic fluids ascending or at the shallow deposit site. We suggest that the crust-mantle mixing signature of the Longquanzhan gold deposit is genetically related to the Late Cretaceous lithospheric thinning along the Tan-Lu fault zone, which triggers constantly uplifting of the asthenosphere surface and persistent ascending of the isotherm plane to form the gold mineralization-related crustal level magma sources. This genetic model can be applied, to some extent, to explain the ore genesis of other deposits near or within the Tan-Lu fault belt.

SPM Characterization of Substrate Surfaces Prepared for Carbon-Related-Film Deposition

1999 ◽  
Vol 587 ◽  
Author(s):  
Kazumasa Narumi ◽  
Shunya Yamamoto ◽  
Hiroshi Naramoto
Keyword(s):  
Annealing Temperature ◽  
Temperature Characteristic ◽  
Film Deposition ◽  
Annealing Conditions ◽  
Atomic Force ◽  
Surface Steps ◽  
Order Of Magnitude ◽  
Reducing Environment ◽  
Substrate Surfaces

AbstractsVariation of surface steps on sapphire (0001) and (1120) substrates processed with thermal annealing in air or a reducing environment at 1000 to 1400°C for 1 to 10 hours were investigated with an atomic force microscope (AFM). The annealed (0001) surfaces consist of atomically smooth and large terraces and atomic-height steps, whose configurations strongly depend on annealing conditions. On the (1120) surfaces, where crystallographic misorientation is almost an order of magnitude larger than that of the (0001) surfaces, step height and terraces increase in size with the longer annealing time and higher annealing temperature. Characteristic step figures due to the symmetry of atomic arrangement were observed on the (0001) surface.

scholarly journals Order-of-magnitude multiphoton signal enhancement based on characterization of absorption spectra of immersion oils at the 1700-nm window

2017 ◽  
Vol 25 (6) ◽  
pp. 5909 ◽  
Author(s):  
Ke Wang ◽  
Wenhui Wen ◽  
Yuxin Wang ◽  
Kai Wang ◽  
Jiexing He ◽  
...  
Keyword(s):  
Absorption Spectra ◽  
Signal Enhancement ◽  
Order Of Magnitude

CALCITE U-Pb DATING UNRAVELS THE AGE AND HYDROTHERMAL HISTORY OF THE GIANT SHUIYINDONG CARLIN-TYPE GOLD DEPOSIT IN THE GOLDEN TRIANGLE, SOUTH CHINA

2021 ◽  
Vol 116 (6) ◽  
pp. 1253-1265
Author(s):  
Xiao-Ye Jin ◽  
Jian-Xin Zhao ◽  
Yue-Xing Feng ◽  
Albert H. Hofstra ◽  
Xiao-Dong Deng ◽  
...  
Keyword(s):  
Gold Deposit ◽  
Early Cretaceous ◽  
South China ◽  
Gold Deposits ◽  
Ore Deposits ◽  
Late Triassic ◽  
Gold Deposition ◽  
Golden Triangle ◽  
Icp Ms ◽  
Carlin Type Gold Deposits

Abstract The ages of Carlin-type gold deposits in the Golden Triangle of South China have long been questioned due to the general lack of minerals unequivocally linked to gold deposition that can be precisely dated using conventional radiogenic isotope techniques. Recent advances in U-Pb methods show that calcite can be used to constrain the ages of hydrothermal processes, but few studies have been applied to ore deposits. Herein, we show that this approach can be used to constrain the timing of hydrothermal activity that generated and overprinted the giant Shuiyindong Carlin-type gold deposit in the Golden Triangle. Three stages of calcite (Cal-1, Cal-2, and Cal-3) have been recognized in this deposit based on crosscutting relationships, cathodoluminescence colors, and chemical (U, Pb, and rare earth element [REE]) and isotope (C, O, Sr) compositions. Cal-1 is texturally associated with ore-stage jasperoid and disseminated Au-bearing arsenian pyrite in hydrothermally altered carbonate rocks, which suggests it is synmineralization. Cal-2 fills open spaces and has a distinct orange cathodoluminescence, suggesting that it precipitated during a second fluid pulse. Cal-1 and Cal-2 have similar carbonate rock-buffered chemical and isotopic compositions. Cal-3 occurs in veins that often contain realgar and/or orpiment and are chemically (low U, Pb, and REE) and isotopically (higher δ13C, lower δ18O and Sri values) distinct from Cal-1 and Cal-2, suggesting that it formed from a third fluid. U-Pb isotope analyses, by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) for U-rich Cal-1 and Cal-2 and by LA-multicollector (MC)-ICP-MS for U-poor Cal-3, yield well-defined age constraints of 204.3 to 202.6, 191.9, and 139.3 to 137.1 Ma for Cal-1, Cal-2, and Cal-3, respectively. These new ages suggest that the Shuiyindong gold deposit formed in the late Triassic and was overprinted by hydrothermal events in the early Jurassic and early Cretaceous. Given the association of Cal-3 with orpiment and realgar, and previous geochronologic studies of several other major gold deposits in the Golden Triangle, we infer that the latest stage of calcite may be associated with an early Cretaceous regional gold metallogenic event. Combined with existing isotopic ages in the region, these new ages lead us to propose that Carlin-type gold deposits in the Golden Triangle formed during two metallogenic episodes in extensional settings, associated with the late Triassic Indochina orogeny and early Cretaceous paleo-Pacific plate subduction. This study shows that the calcite U-Pb method can be used to constrain the timing of Carlin-type gold deposits and successive hydrothermal events.

scholarly journals A NEW GOLD ORE REGION IN TANZANIA

2018 ◽  
pp. 55-59
Author(s):  
V. Mykhailov ◽  
А. Tots
Keyword(s):  
Gold Deposit ◽  
Shear Zone ◽  
Gold Mineralization ◽  
Lake Victoria ◽  
Gold Deposits ◽  
Mobile Belt ◽  
Gold Content ◽  
Gold Ore ◽  
Metallogenic Zone ◽  
The Republic

Tanzania is one of the leading gold mining countries in the world and the discovery of new gold resources on its territory is an actual task. Known gold deposits are concentrated mainly in the northwest of the country, in the metallogenic zone of Lake Victoria, where they are associated with the Archean greenstone belts, and to a lesser extent – in the southwest, in the ore regions of Lupa and Mpanda, confined to the Ubendian Paleoproterozoic mobile belt. With regard to the eastern regions of Tanzania, where the Proterozoic structures of the Uzagaran mobile belt are developed, until recently in this region any significant manifestations of gold mineralization were not known. As a result of our research in the northern part of the Morogoro province of the Republic of Tanzania, a new previously unknown gold deposit Mananila was discovered. It is represented by a large volume, up to 400–450 m long, up to 60–80 m thick, mineralized shear zone over intensely leached and schistosed migmatites, gneisses, amphibolites, penetrated by echelon systems of quartz veins and veinlet, steeply dipping bodies of quartz breccia up to 1.0–1.5 m thick. Gold contents range from 0.61 to 8.11 g/t, the average zone content is 2.5–3.0 g/t. Parallel to the main zone, similar structures are developed on the site, although they are of lower thickness. The forecast resources of the deposit are estimated at 20 tons of gold. 2.8 km to the east from the Mananila field, the recently discovered Mazizi gold deposit is located, and a number of small occurrences of gold are also known in the region. All these objects are located within a large shear zone of the northeastern strike, up to 4–5 km width, over 20 km in length. This serves as the basis for the identification of a new gold ore region in the northern part of the Morogoro province of the United Republic of Tanzania, within the Proterozoic mobile belt of Usagaran, the possible gold content of which has never been previously discussed in geological literature.

Sign in / Sign up

Export Citation Format

Share Document