scholarly journals Investigation on Mechanical Characteristics and Microstructure of Cemented Whole Tailings Backfill

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 592
Author(s):  
Armelle Estelle Belibi Tana ◽  
Shenghua Yin ◽  
Leiming Wang
Keyword(s):  
Yield Stress ◽  
Mechanical Characteristics ◽  
Xrd Analysis ◽  
Solid Content ◽  
Chemical Components ◽  
Cemented Paste Backfill ◽  
Before And After ◽  
Paste Backfill ◽  
Solids Content ◽  
Rheological Test

A paste backfill performance can be primarily evaluated through the mechanical and physical characteristics of the components involved. In this study, the effects of solid components’ tailings, binders and waters contents on microstructural evolution and mechanical properties of uncemented whole tailings backfill (CWTB) mixtures were investigated. Different mixtures of ordinary Portland cement of 1, 3 and 5 wt. % and solid concentrations at 72 wt. %, 74 wt. % and 75 wt. % were selected and rheological test was conducted to define the slump fluidity and yield stress. The microstructure of the solid component before and after the preparation and chemical composition were analyzed by the Scanning electron microscope and XRD analysis, respectively. The results show that a positive correlation between yield stress and slump values of CWTB paste slurries, the decrease of flow consistence leads to the reduction of the water content on the CWTB mixtures and the flow resistance of the paste. With the highest solids content, unconfined compressive strength (UCS) of CWTB varies between 0.1–0.9 MPa. Increasing the solid content affects the porosity and improves the strength resistance of CWTB mixtures. The findings in this study can therefore lead us to a statement that CWTB chemical components seem to be an important factor in cemented paste backfill (CPB) design and mine operations.

scholarly journals Mechanical Characteristics and Stress Evolution of Cemented Paste Backfill: Effect of Curing Time, Solid Content, and Binder Content

2022 ◽  
Vol 8 ◽  
Author(s):  
Chen Hou ◽  
Liujun Yang ◽  
Lei Li ◽  
Baoxu Yan
Keyword(s):  
Mechanical Properties ◽  
Mechanical Characteristics ◽  
Peak Stress ◽  
Solid Content ◽  
Binder Content ◽  
Cemented Paste Backfill ◽  
Curing Time ◽  
Stress Evolution ◽  
Stress Strain ◽  
Paste Backfill

The clarification of the variation on the strength of the cemented paste backfill (CPB) under the coupling of multi-factor is the foundation of the CPB design of the mine. In this article, the physical and mechanical properties of the CPB under the coupling effect of curing time, solid content, and binder content were experimentally and theoretically investigated. The results show that 1) the increase in binder content can effectively increase the later strength of CPB. 2) A sensitivity parameter considering the span of multi-factor was constructed, indicating that the curing time has the greatest impact on the uniaxial compressive strength (UCS), and the variation in solid content has the least impact on it, which can be verified by the stress–strain curves. 3) Curing time and binder content can effectively change the stress evolution, which is reflected in reducing the strain corresponding to the peak stress, enhancing the characteristics of the peak stress and increasing stress drop. The results of this study aim to explain the essence of the influence of each factor on the mechanical behavior of CPB in the view of stress–strain evolution, which will help to better understand the mechanical characteristics of CPB and quantify the sensitivity of the mechanical properties to various factors.

scholarly journals Rheological Properties of Ultra-Fine Tailings Cemented Paste Backfill under Ultrasonic Wave Action

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 718
Author(s):  
Weicheng Ren ◽  
Rugao Gao ◽  
Youzhi Zhang ◽  
Maoxin Hou
Keyword(s):  
Rheological Properties ◽  
Yield Stress ◽  
Ultrasonic Wave ◽  
Mass Concentration ◽  
Wave Action ◽  
Cemented Paste Backfill ◽  
Fine Tailings ◽  
Paste Backfill ◽  
Rheological Test ◽  
Positive Effect

Ultra-fine tailings cemented paste backfill (UCPB) exhibits special rheological characteristics with the effect of an ultrasonic sound field. In this study, in order to explore the thickening effect of slurry under ultrasonic wave action, we examined the rheological properties with ultrasonic wave tests of UCPB and the rheological properties after ultrasonic wave tests of UCPB. We found that the rheological curve of the slurry changed; the Herschel–Bulkley (HB) model in the initial state transformed into the Bingham model under the action of ultrasound. Ultrasonic waves have a positive effect on reducing slurry viscosity and yield stress. The rheological test of the slurry with ultrasonic wave action had a positive effect on significantly reducing the apparent viscosity and initial yield stress of slurry with a 62% mass concentration. The rheological test of slurry with ultrasonic wave action and the rheological test after ultrasonic wave action both have positive effects on reducing the viscosity and yield stress of the slurry with a 64% to 68% mass concentration; the overall effect of reducing the viscosity and yield stress of UCPB is greater after ultrasonic wave action of UCPB.

scholarly journals Investigating the Effect of Solid Components on Yield Stress for Cemented Paste Backfill via Uniform Design

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Yong Wang ◽  
Aixiang Wu ◽  
Lianfu Zhang ◽  
Fei Jin ◽  
Xiaohui Liu
Keyword(s):  
Yield Stress ◽  
Mass Fraction ◽  
Cement Content ◽  
Uniform Design ◽  
Free Water ◽  
Experimental Program ◽  
Cemented Paste Backfill ◽  
Free Water Content ◽  
Key Factor ◽  
Paste Backfill

Cemented paste backfill (CPB) technology has been applied quite popular around the world. Yield stress is a key factor determining whether CPB could be transported. In order to reveal the effect of solid components on yield stress of CPB, a uniform design experimental program (four factors and six levels) was conducted to test the rheological property of a mine’s CPB. The tested four factors including mass fraction, cement versus other solids ratio, coarse tailings, and gravel contents were considered during the experiment design. Likewise, six experimental levels were given to each factor. Results of the test show that yield stress increased with the mass fraction and cement content. However, the trend reversed for the content of coarse tailings and gravel. Contribution of the four factors to yield stress in descending order is mass fraction > content of gravel > content of coarse tailings > cement versus other tailings ration. Effect of solid components on the yield stress of CPB is mainly due to the different flocculation structure inside the CPB. These various flow structures result in the different free-water content of CPB, leading to a different yield stress value.

scholarly journals Low-Carbon Binder for Cemented Paste Backfill: Flowability, Strength and Leaching Characteristics

Minerals ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 707 ◽  
Author(s):  
Jingping Qiu ◽  
Yingliang Zhao ◽  
Hui Long ◽  
Zhenbang Guo ◽  
Jun Xing ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Orthogonal Experiment ◽  
Solid Content ◽  
Raw Material ◽  
Cemented Paste Backfill ◽  
Low Carbon ◽  
Optimum Parameters ◽  
Paste Backfill ◽  
Activated Slag ◽  
Furnace Slag

Blast furnace slag was used as the main raw material to prepare the alkali activated slag (AAS), a low-carbon binder, for cemented paste backfill (CPB). The optimum parameters for preparing the AAS binders using an orthogonal experiment were obtained. Under the optimum conditions (NaOH content was 3 wt. %, Ordinary Portland cement (OPC) content was 7 wt. %, and gypsum dosage was 4 wt. %), the 28 days compressive strength of the binder was 29.55 MPa. The flow ability of the fresh CPB slurry decreased with solid content due to the increased yield stress, while the flow ability increased when rising the binder dosage. A predictive model for the compressive strength of CPB samples was reached through multivariate analysis and the R2 values were higher than 0.9. Sensitivity analysis showed that the solid content is the most important parameter which influences on the development of the CPB strength with a correlation coefficient of 0.826. From the Toxicity Characteristic Leaching Procedure (TCLP) tests, the leaching concentrations of Pb and Cd were below the threshold. As a result, the AAS has potential application as an alternative binder and cemented paste backfill.

scholarly journals Shear thinning and thickening of cemented paste backfill

2019 ◽  
Vol 29 (1) ◽  
pp. 80-93 ◽  
Author(s):  
Liuhua Yang ◽  
Hongjiang Wang ◽  
Aixiang Wu ◽  
Hong Li ◽  
Arlin Bruno Tchamba ◽  
...  
Keyword(s):  
Shear Rate ◽  
Rheological Properties ◽  
Yield Stress ◽  
Shear Thinning ◽  
High Shear ◽  
Cemented Paste Backfill ◽  
Concentrated Suspension ◽  
History Effects ◽  
Paste Backfill ◽  
Shear History

Abstract Cemented paste backfill (CPB) is considered to be a concentrated suspension in which tailings are bonded together by the hydraulic binder and water, and it has a high solid volume concentration (≥50 vol.%). Although the shear thinning and thickening of CPB has been extensively reported in literature, the shear history effects have been ignored in previous studies. In this paper, by using rheometer and Focused Beam Reflectance Measurement, the relationship between the rheological properties and microstructure of the paste under different shear histories was studied. The results have shown that at a low shear rate, CPB revealed shear thinning, low yield stress and low index parameters; while exhibited shear thickening, high yield stress and high consistency index when at high shear rates of shear history. This agreed with the general trends shown in the FBRM analysis. It was proposed that the action of shear is beneficial to particle dispersion, whereas a high shear rate history tends to promote the aggregation of particles. It was revealed that both shear thinning and thickening of paste are related to the situation of particles (flocculation, dispersion and aggregation), and shear history effects play an important role in rheological properties of CPB.

scholarly journals Rheological Properties of Cemented Paste Backfill with Alkali-Activated Slag

Minerals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 288 ◽  
Author(s):  
Yunpeng Kou ◽  
Haiqiang Jiang ◽  
Lei Ren ◽  
Erol Yilmaz ◽  
Yuanhui Li
Keyword(s):  
Yield Stress ◽  
Rheological Behavior ◽  
Plastic Viscosity ◽  
Molar Ratio ◽  
Cemented Paste Backfill ◽  
Lower Yield Stress ◽  
Alkali Activated Slag ◽  
Paste Backfill ◽  
Activated Slag ◽  
Alkali Activated

This study investigates the time-dependent rheological behavior of cemented paste backfill (CPB) that contains alkali-activated slag (AAS) as a binder. Rheological measurements with the controlled shear strain method have been conducted on various AAS-CPB samples with different binder contents, silicate modulus (Ms: SiO2/Na2O molar ratio), fineness of slag and curing temperatures. The Bingham model afforded a good fit to all of the CPB mixtures. The results show that AAS-CPB samples with high binder content demonstrate a more rapid rate of gain in yield stress and plastic viscosity. AAS-CPB also shows better rheological behavior than CPB samples made up of ordinary Portland cement (OPC) at identical binder contents. It is found that increasing Ms yields lower yield stress and plastic viscosity and the rate of gain in these parameters. Increases in the fineness of slag has an adverse effect on rheological behavior of AAS-CPB. The rheological behavior of both OPC- and AAS-CPB samples is also strongly enhanced at higher temperatures. AAS-CPB samples are found to be more sensitive to the variation in curing temperatures than OPC-CPB samples with respect to the rate of gain in yield stress and plastic viscosity. As a result, the findings of this study will contribute to well understand the flow and transport features of fresh CPB mixtures under various conditions and their changes with time.

scholarly journals Specific Mixing Energy of Cemented Paste Backfill, Part II: Influence on the Rheological and Mechanical Properties and Practical Applications

Minerals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1159
Author(s):  
Reagan Kabanga Dikonda ◽  
Mamert Mbonimpa ◽  
Tikou Belem
Keyword(s):  
Mechanical Properties ◽  
Rheological Properties ◽  
Yield Stress ◽  
Specific Energy ◽  
Distribution System ◽  
Flow Index ◽  
Cemented Paste Backfill ◽  
Practical Applications ◽  
Mixing Energy ◽  
Paste Backfill

The rheological properties (yield stress, flow index and infinite dynamic viscosity) and mechanical properties (unconfined compressive strength, UCS) of different cemented paste backfill (CPB) recipes must be determined during the laboratory optimization phase. However, the influence of the mixing procedure on these properties has scarcely been studied so far. The objective of this paper is to assess to what extent these properties depend on the specific mixing energy (SME) for a given type of mixer. CPB recipes were prepared based on two types of tailing (CPB-T1 and CPB-T2, also referred to as T1 and T2) at a fixed solid percentage for each type of tailing using the Omcan laboratory mixer. A mixture of 80% slag and 20% GU was used as a binder. The mixing time and the rotation speed of the mixer were successively varied. For each recipe prepared, we determined the SME, the rheological properties of fresh CPB (at the end of mixing) and the UCS at 7, 28 and 90 days of curing. The results show that yield stress and infinite viscosity decreased when SME increased in an interval going from 0.3 to 3.8 Wh/kg and 0.6 to 6 Wh/kg for CPB-T1 and CPB-T2, respectively. An increasing trend in UCS with increasing SME was also observed. Empirical equations describing the change of the rheological properties with the SME are used to estimate the change in rheological properties of CPB along the distribution system, considering the specific energy dissipation during CPB transportation. A mixing procedure for obtaining CPB mixtures that are representative of CPB deposited in underground mine stopes is suggested for laboratories who currently use a same mixing procedure, irrespective of the variable field specific energy.

Sign in / Sign up

Export Citation Format

Share Document