scholarly journals In Situ X-ray Diffraction at High Temperatures: Formation of Ca2SiO4 and Ternesite in Recycled Autoclaved Aerated Concrete

Minerals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 789
Author(s):  
Angela Ullrich ◽  
Krassimir Garbev ◽  
Britta Bergfeldt
Keyword(s):  
Room Temperature ◽  
X Ray Diffraction ◽  
Sulfate Content ◽  
In Situ Xrd ◽  
Autoclaved Aerated Concrete ◽  
Thermal Expansion Coefficients ◽  
Slow Quench ◽  
Aerated Concrete ◽  
Heating Up

This study provides an insight into possible recycling processes for autoclaved aerated concrete (AAC) at low temperatures (<1000 °C). Belite binders were synthesized from wastes of AAC by the addition of CaCO3 and adaption of the molar CaO/SiO2 (C/S ratio) in the range of 2 to 2.5. An in situ XRD study performed during heating up to 1000 °C and subsequent quenching to room temperature evidenced the formation of ternesite besides C2S in sulfate-containing systems. Several factors influencing the reaction kinetics and the evolution of the phase composition were investigated thoroughly. Increased sulfate content and dwelling time during heating increase the ternesite content and promote the formation of highly crystalline α’H-C2S. The C/S-ratio of the starting materials has to be adjusted to the sulfate content in order to prevent the formation of ternesite at the expense of C2S. Ternesite remains stable during quenching to room temperature or even increases in amount, except in cases of very low cooling rates or high residual quartz contents (C/S-ratio ≤ 2). Temperature and range of α’H-C2S to β-C2S phase transition on quenching strongly depend on the cooling rate. The onset temperature for β-C2S formation varies between 540 °C (slow quench) and 450 °C (fast quench). Thermal expansion coefficients of ternesite are calculated showing similarity with C2S. The incorporation of CaSO4 modules in the structure switches the direction of maximum compression.

D-45 Development of In Situ X-ray Diffraction System for Hydrothermal Reaction and Its Application to Autoclaved Aerated Concrete Formation

2010 ◽  
Vol 25 (2) ◽  
pp. 210-210
Author(s):  
J. Kikuma ◽  
M. Tsunashima ◽  
T. Ishikawa ◽  
S. Matsuno ◽  
K. Matsui ◽  
...  
Keyword(s):  
Hydrothermal Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Autoclaved Aerated Concrete ◽  
Aerated Concrete

In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

2011 ◽  
Vol 41 (5) ◽  
pp. 510-519 ◽  
Author(s):  
Kunio Matsui ◽  
Jun Kikuma ◽  
Masamichi Tsunashima ◽  
Tetsuji Ishikawa ◽  
Shin-ya Matsuno ◽  
...  
Keyword(s):  
X Ray Diffraction ◽  
Time Resolved ◽  
X Ray ◽  
Autoclaved Aerated Concrete ◽  
Silica Source ◽  
Aerated Concrete ◽  
Al Addition

Photoluminescence Enhancement of CdS Nanocrystals Fabricated on Dithiocarbamate Functionalized PET Substrates

2012 ◽  
Vol 512-515 ◽  
pp. 1511-1515
Author(s):  
Chun Lin Zhao ◽  
Li Xing ◽  
Xiao Hong Liang ◽  
Jun Hui Xiang ◽  
Fu Shi Zhang ◽  
...  
Keyword(s):  
Room Temperature ◽  
Hexagonal Structure ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Cds Nanocrystals ◽  
Morphological Studies ◽  
Transmission Electron

Cadmium sulfide (CdS) nanocrystals (NCs) were self-assembled and in-situ immobilized on the dithiocarbamate (DTCs)-functionalized polyethylene glycol terephthalate (PET) substrates between the organic (carbon disulfide diffused in n-hexane) –aqueous (ethylenediamine and Cd2+ dissolved in water) interface at room temperature. Powder X-ray diffraction measurement revealed the hexagonal structure of CdS nanocrystals. Morphological studies performed by scanning electron microscopy (SEM) and high-resolution transmission electron microscope (HRTEM) showed the island-like structure of CdS nanocrystals on PET substrates, as well as energy-dispersive X-ray spectroscopy (EDS) confirmed the stoichiometries of CdS nanocrystals. The optical properties of DTCs modified CdS nanocrystals were thoroughly investigated by ultraviolet-visible absorption spectroscopy (UV-vis) and fluorescence spectroscopy. The as-prepared DTCs present intrinsic hydrophobicity and strong affinity for CdS nanocrystals.

In Situ Synchrotron X-Ray Diffraction Study of a Deformed Cu-Fe-P Alloy during Heating

2016 ◽  
Vol 850 ◽  
pp. 191-196 ◽  
Author(s):  
Wei Wang ◽  
Cun Lei Zou ◽  
Ren Geng Li ◽  
Wen Wen ◽  
Hui Jun Kang ◽  
...  
Keyword(s):  
Room Temperature ◽  
Lattice Distortion ◽  
Copper Matrix ◽  
Heating Process ◽  
Recrystallization Process ◽  
Full Width ◽  
X Ray Diffraction ◽  
Dramatic Decrease ◽  
X Ray

In situ synchrotron X-ray diffraction was used to study a deformed Cu-0.88 Fe-0.24 P alloy during heating process. The measurements were performed at room temperature and also at high temperatures up to 893 K in order to determine the recovery, ageing and recrystallization process. With the increase of temperature, the angles of copper matrix peaks moved left and the FWHM (full width at half maximum) decreased slightly. Fe3P precipitates were first detected at 533 K, reached the maximum at 673 K, and re-dissolved into matrix at 853 K. A dramatic decrease in FWHM was observed accompanied by the precipitation of Fe3P phases, indicating the reduction of lattice distortion of copper matrix.

scholarly journals Insertion of Phosphenium Ions into a Bicyclo[1.1.0]Tetraphosphabutane Iron Complex

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3920
Author(s):  
Martin Weber ◽  
Gábor Balázs ◽  
Alexander V. Virovets ◽  
Eugenia Peresypkina ◽  
Manfred Scheer
Keyword(s):  
Diffraction Analysis ◽  
Room Temperature ◽  
31P Nmr ◽  
Spectroscopic Studies ◽  
Iron Complex ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Phosphenium Ions

By reacting [{Cp‴Fe(CO)2}2(µ,η1:1-P4)] (1) with in situ generated phosphenium ions [Ph2P][A] ([A]− = [OTf]− = [O3SCF3]−, [PF6]−), a mixture of two main products of the composition [{Cp‴Fe(CO)2}2(µ,η1:1-P5(C6H5)2)][PF6] (2a and 3a) could be identified by extensive 31P NMR spectroscopic studies at 193 K. Compound 3a was also characterized by X-ray diffraction analysis, showing the rarely observed bicyclo[2.1.0]pentaphosphapentane unit. At room temperature, the novel compound [{Cp‴Fe}(µ,η4:1-P5Ph2){Cp‴(CO)2Fe}][PF6] (4) is formed by decarbonylation. Reacting 1 with in situ generated diphenyl arsenium ions gives short-lived intermediates at 193 K which disproportionate at room temperature into tetraphenyldiarsine and [{Cp‴Fe(CO)2}4(µ4,η1:1:1:1-P8)][OTf]2 (5) containing a tetracyclo[3.3.0.02,7.03,6]octaphosphaoctane ligand.

In Situ X-Ray Diffraction Studies of Crystallization Growth Behavior in ZnO-Bi2O3-B2O3 Glass as a Route to Functional Optical Devices

MRS Advances ◽  
2018 ◽  
Vol 3 (11) ◽  
pp. 563-567 ◽  
Author(s):  
Quentin Altemose ◽  
Katrina Raichle ◽  
Brittani Schnable ◽  
Casey Schwarz ◽  
Myungkoo Kang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Glass Ceramics ◽  
Treatment Temperature ◽  
Crystal Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
In Situ Xrd ◽  
Dsc Measurements ◽  
Transmission Window

ABSTRACTTransparent optical ZnO–Bi2O3–B2O3 (ZBB) glass-ceramics were created by the melt quenching technique. In this work, a melt of the glass containing stoichiometric ratios of Zn/Bi/B and As was studied. Differential scanning calorimeter (DSC) measurements was used to measure the thermal behavior. VIS/NIR transmission measurements were used to determine the transmission window. X-ray diffraction (XRD) was used to determine crystal phase. In this study, we explore new techniques and report a detailed study of in-situ XRD of the ZBB composition in order to correlate nucleation temperature, heat treatment temperature, and heat treatment duration with induced crystal phase.

In situ seismic testing of a reinforced autoclaved aerated concrete building

ce/papers ◽  
2018 ◽  
Vol 2 (4) ◽  
pp. 253-258
Author(s):  
Furkan Gokmen ◽  
Baris Binici ◽  
Erdem Canbay ◽  
Alper Aldemir ◽  
Mustafa Kagan Ogdu ◽  
...  
Keyword(s):  
Seismic Testing ◽  
Autoclaved Aerated Concrete ◽  
Concrete Building ◽  
Aerated Concrete

scholarly journals In situ monitoring of hydrothermal reactions by X-ray diffraction with Bragg–Brentano geometry

2020 ◽  
Vol 53 (4) ◽  
pp. 1163-1166
Author(s):  
Karsten Mesecke ◽  
Winfried Malorny ◽  
Laurence N. Warr
Keyword(s):  
Quantitative Information ◽  
In Situ Monitoring ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Saturated Vapour Pressure ◽  
Concrete Production ◽  
Aerated Concrete ◽  
Kinetics Of

This note describes an autoclave chamber developed and constructed by Anton Paar and its application for in situ experiments under hydrothermal conditions. Reactions of crystalline phases can be studied by successive in situ measurements on a conventional laboratory X-ray diffractometer with Bragg–Brentano geometry at temperatures <483 K and saturated vapour pressure <2 MPa. Variations in the intensity of X-ray diffraction reflections of both reactants and products provide quantitative information for studying the reaction kinetics of both dissolution and crystal growth. Feasibility is demonstrated by studying a cementitious mixture used for autoclaved aerated concrete production. During a period of 5.7 h at 466 K and 1.35 MPa, the crystallization of torbermorite and the partial consumption of quartz were monitored.

In situ high temperature X-ray diffraction study of the kinetics of phase separation in the uranium-plutonium mixed oxide (U0.55Pu0.45)O2-x

2014 ◽  
Vol 1645 ◽  
Author(s):  
Romain VAUCHY ◽  
Renaud.C. BELIN ◽  
Anne-Charlotte ROBISSON ◽  
Fiqiri HODAJ
Keyword(s):  
Phase Separation ◽  
Room Temperature ◽  
Mixed Oxides ◽  
Oxygen Stoichiometry ◽  
X Ray Diffraction ◽  
Fundamental Interest ◽  
X Ray ◽  
Uranium Plutonium ◽  
Kinetics Of

ABSTRACTUranium-plutonium mixed oxides incorporating high amounts of plutonium are considered for future nuclear reactors. For plutonium content higher than 20%, a phase separation occurs, depending on the temperature and on the oxygen stoichiometry. This phase separation phenomenon is still not precisely described, especially at high plutonium content. Here, using an original in situ fast X-ray diffraction device dedicated to radioactive materials, we evidenced a phase separation occurring during rapid cooling from 1773 K to room temperature at the rate of 0.05 and 2 K per second for a (U0.55Pu0.45)O2-x compound under a reducing atmosphere. The results show that the cooling rate does not impact the lattice parameters of the obtained phases at room temperature but their fraction. In addition to their obvious fundamental interest, these results are of utmost importance in the prospect of using uranium-plutonium mixed oxides with high plutonium content as nuclear fuels.

Sign in / Sign up

Export Citation Format

Share Document