scholarly journals Laboratory Scale Investigations on Heap (Bio)leaching of Municipal Solid Waste Incineration Bottom Ash

Minerals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 290 ◽  
Author(s):  
Jarno Mäkinen ◽  
Marja Salo ◽  
Jaakko Soini ◽  
Päivi Kinnunen
Keyword(s):  
Municipal Solid Waste ◽  
Solid Waste ◽  
Bottom Ash ◽  
Physical Nature ◽  
Waste Incineration ◽  
Heap Leaching ◽  
Leach Solution ◽  
Proper Solution ◽  
Municipal Solid Waste Incineration ◽  
Main Components

Municipal solid waste incineration bottom ash (MSWI BA) is the main output of the municipal solid waste incineration process, both in mass and volume. It contains some heavy metals that possess market value, but may also limit the utilization of the material. This study illustrates a robust and simple heap leaching method for recovering zinc and copper from MSWI BA. Moreover, the effect of autotrophic and acidophilic bioleaching microorganisms in the system was studied. Leaching yields for zinc and copper varied between 18–53% and 6–44%, respectively. For intensified copper dissolution, aeration and possibly iron oxidizing bacteria caused clear benefits. The MSWI BA was challenging to treat. The main components, iron and aluminum, dissolved easily and unwantedly, decreasing the quality of pregnant leach solution. Moreover, the physical nature and the extreme heterogeneity of the material caused operative requirements for the heap leaching. Nevertheless, with optimized parameters, heap leaching may offer a proper solution for MSWI BA treatment.

The fate of heavy metals and salts during the wet treatment of municipal solid waste incineration bottom ash

2021 ◽  
Vol 121 ◽  
pp. 33-41
Author(s):  
Yanjun Hu ◽  
Lingqin Zhao ◽  
Yonghao Zhu ◽  
Bennong Zhang ◽  
Guixiang Hu ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Bottom Ash ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration

scholarly journals A Review on Cementitious Materials Including Municipal Solid Waste Incineration Bottom Ash (MSWI-BA) as Aggregates

Buildings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 179
Author(s):  
Jad Bawab ◽  
Jamal Khatib ◽  
Said Kenai ◽  
Mohammed Sonebi
Keyword(s):  
Municipal Solid Waste ◽  
Water Absorption ◽  
Solid Waste ◽  
Bottom Ash ◽  
Chemical Properties ◽  
Waste Incineration ◽  
Treatment Method ◽  
Cementitious Materials ◽  
Municipal Solid Waste Incineration ◽  
Municipal Solid Wastes

Waste management is a vital environmental issue in the world today. Municipal solid wastes (MSWs) are discarded in huge quantities on a daily basis and need to be well controlled. Incineration is a common method for reducing the volume of these wastes, yet it produces ashes that require further assessment. Municipal solid waste incineration bottom ash (MSWI-BA) is the bulk byproduct of the incineration process and has the potential to be used in the construction sector. This paper offers a review of the use of MSWI-BA as aggregates in cementitious materials. With the growing demand of aggregates in cementitious materials, MSWI-BA is considered for use as a partial or full alternative. Although the physical and chemical properties of MSWI-BA are different than those of natural aggregates (NA) in terms of water absorption, density, and fineness, they can be treated by various methods to ensure suitable quality for construction purposes. These treatment methods are classified into thermal treatment, solidification and stabilization, and separation processes, where this review focuses on the techniques that reduce deficiencies limiting the use of MSWI-BA as aggregates in different ways. When replacing NA in cementitious materials, MSWI-BA causes a decrease in workability, density, and strength. Moreover, they cause an increase in water absorption, air porosity, and drying shrinkage. In general, the practicality of using MSWI-BA in cementitious materials is mainly influenced by its treatment method and the replacement level, and it is concluded that further research, especially on durability, is required before MSWI-BA can be efficiently used in the production of sustainable cementitious materials.

Use of Municipal Solid Waste Incineration Bottom Ash in Adsorption of Heavy Metals

2011 ◽  
Vol 474-476 ◽  
pp. 1099-1102
Author(s):  
Hai Ying Zhang ◽  
Yi Zheng ◽  
Hong Tao Hu ◽  
Jing Yu Qi
Keyword(s):  
Heavy Metals ◽  
Particle Size ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Residence Time ◽  
Bottom Ash ◽  
Waste Incineration ◽  
Synthetic Wastewater ◽  
High Porosity ◽  
Municipal Solid Waste Incineration

Bottom ash from municipal solid waste incineration (MSWI) has been previously suggested as an adsorbent for removing heavy metals from wastewater due to its high porosity and large surface area. In this study the adsorption characteristics of heavy metals were investigated using various particle sizes of MSWI bottom ash. The adsorption experiment was conducted using synthetic wastewater containing Cu, Zn, Pb and Cd as a function of residence time, initial pH, ash dosage and particle size, respectively. The adsorption rate increased with decreasing particle size and with increasing residence time. Through the above analysis, this work proved that bottom ash was effective in adsorbing the four heavy metals.

Sign in / Sign up

Export Citation Format

Share Document