scholarly journals Lyophilized Drug-Loaded Solid Lipid Nanoparticles Formulated with Beeswax and Theobroma Oil

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 908
Author(s):  
Hilda Amekyeh ◽  
Nashiru Billa
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Colloidal Stability ◽  
Fold Increase ◽  
Active Pharmaceutical Ingredient ◽  
Lipid Nanoparticles ◽  
Systemic Availability ◽  
Solid Lipid ◽  
And Storage ◽  
Higuchi Model

Solid lipid nanoparticles (SLNs) have the potential to enhance the systemic availability of an active pharmaceutical ingredient (API) or reduce its toxicity through uptake of the SLNs from the gastrointestinal tract or controlled release of the API, respectively. In both aspects, the responses of the lipid matrix to external challenges is crucial. Here, we evaluate the effects of lyophilization on key responses of 1:1 beeswax–theobroma oil matrix SLNs using three model drugs: amphotericin B (AMB), paracetamol (PAR), and sulfasalazine (SSZ). Fresh SLNs were stable with sizes ranging between 206.5–236.9 nm. Lyophilization and storage for 24 months (4–8 °C) caused a 1.6- and 1.5-fold increase in size, respectively, in all three SLNs. Zeta potential was >60 mV in fresh, stored, and lyophilized SLNs, indicating good colloidal stability. Drug release was not significantly affected by lyophilization up to 8 h. Drug release percentages at end time were 11.8 ± 0.4, 65.9 ± 0.04, and 31.4 ± 1.95% from fresh AMB-SLNs, PAR-SLNs, and SSZ-SLNs, respectively, and 11.4 ± 0.4, 76.04 ± 0.21, and 31.6 ± 0.33% from lyophilized SLNs, respectively. Thus, rate of release is dependent on API solubility (AMB < SSZ < PAR). Drug release from each matrix followed the Higuchi model and was not affected by lyophilization. The above SLNs show potential for use in delivering hydrophilic and lipophilic drugs.

Development of Solid Lipid Nanoparticles of Lamivudine for Brain Targeting

2009 ◽  
Vol 1 (1) ◽  
Author(s):  
Pravin Patil ◽  
Anil Sharma ◽  
Subhash Dadarwal ◽  
Vijay Sharma
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Rotation Speed ◽  
Lipid Nanoparticles ◽  
Brain Targeting ◽  
Brain Penetration ◽  
Solid Lipid ◽  
Diffusion Technique

The objective of present investigation was to enhance brain penetration of Lamivudine, one of the most widely used drugs for the treatment of AIDS. This was achieved through incorporating the drug into solid lipid nanoparticles (SLN) prepared by using emulsion solvent diffusion technique. The formulations were characterized for surface morphology, size and size distribution, percent drug entrapment and drug release. The optimum rotation speed, resulting into better drug entrapment and percent yield, was in the range of 1000-1250 r/min. In vitro cumulative % drug release from optimized SLN formulation was found 40-50 % in PBS (pH-7.4) and SGF (pH-1.2) respectively for 10 h. After 24 h more than 65 % of the drug was released from all formulations in both mediums meeting the requirement for drug delivery for prolong period of time.

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Preparation, Characterization and Optimization of Irbesartan Loaded Solid Lipid Nanoparticles for Oral Delivery

2021 ◽  
pp. 97-104
Author(s):  
Kumara Swamy S ◽  
Ramesh Alli
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Oral Bioavailability ◽  
Oral Delivery ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Sustained Drug Release ◽  
Bioavailability Enhancement ◽  
Solid Lipid

The purpose of this study was to develop and evaluate irbesartan (IS) loaded solid lipid nanoparticles (SLNs; IS-SLNs) that might enhance the oral bioavailability of IS. IS, an angiotensin-receptor antagonist, used to treat hypertension. However, poor aqueous solubility and poor oral bioavailability has limited therapeutic applications of IS. Components of the SLNs include either of trimyristin/tripalmitin/tristearin/trilaurate/stearic acid/beeswax, and surfactants (Poloxamer 188 and soylecithin). The IS-SLNs were prepared by hot homogenization followed by ultrasonication method and evaluated for particle size, poly dispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE), drug content and in vitro drug release. The physical stability of optimized formulation was studied at refrigerated and room temperature for two months. The optimized IS-SLN formulation (F4) had a mean diameter of about 217.6±3.62 nm, PDI of 0.163±0.032, ZP of -28.5±4.12, assay of 99.8±0.51 and EE of 93.68±2.47%. The formulation showed sustained drug release compared with control formulation over 24 h. Optimized formulation was found to be stable over two months. IS-SLN showed nearly spherical in shape using and converted to amorphous form by DSC. Thus, the results conclusively demonstrated SLNs could be considered as an alternative delivery system for the oral bioavailability enhancement of IS.

Development of Mupirocin- Tinidazole solid- Lipid Nanoparticles Loaded Topical gel for the Management of Bacterial Wound Infections

2021 ◽  
pp. 2785-2790
Author(s):  
Veintramuthusankar Veintramuthusankar ◽  
Pushparajudayakumar Pushparajudayakumar ◽  
Rajanduraibabyroselin Rajanduraibabyroselin
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Fickian Diffusion ◽  
Standard Drug ◽  
Topical Gel ◽  
Solid Lipid ◽  
Homogenization Technique ◽  
Significant Difference

Solid lipid nanoparticles (SLNs) are novel drug carrier system which consists of a solid matrix composed of a lipid being solid at both room and body temperatures with a mean Particle Size (PS) between 50 and 1000 nm Mupirocin -Tinidazole solid-lipid nanoparticles were prepared using hot homogenization technique using Glyceryl monosterate, Stearic acid, Tween 80 and Poloxamer 188 using hot homogenization technique. Size of the nanoparticles was in the range of 83 to 211 nm with the zeta potential values between -2.1 to -5.2. Atomic Force Microscopy (AFM) confirms the spherical shape of solid lipid nanoparticles. Entrapment efficiency was best in the F1 formulation. In vitro release of the pure drug was found to be 75% of mupirocin and 66.5% of tinidazole at the end of 1 hr. Drug release from SLNs dispersion followed Korsermeyrs peppas-model, indicating fickian diffusion drug release, while that from the gel followed non Fickian model drug release. Antibacterial activity of the SLNs was less but the SLNs based gel shows no significant difference in activity to that of standard drug gentamycin against aerobic bacteria. The SLNs dispersion exhibited physicochemical stability under refrigeration upto 45 days without significant difference in particle size. Best formulation was developed into a topical gel using sodium alginate and it was evaluated for pH, viscosity, spreadbility, extrudability, bloom strength, Minimum Inhibitory Concentration (MIC) and Methicillin resistant staphylococcus aureus (MRSA). Extrudability and spreadability parameters of the gel are similar to that of marketed Mupirocin 2% cream formulation

scholarly journals FORMULATION AND EVALUATION OF DASATINIB LOADED SOLID LIPID NANOPARTICLES

2018 ◽  
Vol 10 (12) ◽  
pp. 14 ◽  
Author(s):  
M. Yasmin Begum ◽  
Prathyusha Reddy Gudipati
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Size Analysis ◽  
Compatibility Study ◽  
Solid Lipid ◽  
Poly Dispersity Index

Objective: The aim of present work was to formulate and evaluate Dasatinib (DST) loaded solid lipid nanoparticles (SLNs) as a potential anticancer drug delivery system by enhancing its solubility.Methods: SLNs consist of a solid lipid matrix where the drug was incorporated. Surfactants of GRAS grade were used to avoid aggregation and to stabilize the SLNs. DST-SLNs formulations of varying concentrations were prepared by high speed homogenization technique and evaluated for drug excipients compatibility study, poly-dispersity index, particle size analysis, surface morphology, zeta potential and drug release features.Results: It was observed that DST-SLNs with optimum quantities of poloxomer: lecithin ratio showed 88.06% drug release in 6h with good entrapment efficiency of 76.9±0.84 %. Particle size, Poly dispersity index, zeta potential and drug entrapment efficiency for the optimized formulation was found to be optimum. Stability studies revealed that the entrapment efficiency of the SLN dispersion stored in 4 °C was stable.Conclusion: Thus, it can be concluded that formulations of DST loaded SLNs are suitable carriers for improving the solubility and dissolution related problems. 

scholarly journals INTRANASAL DELIVERY OF ARTEMETHER FOR THE TREATMENT OF CEREBRAL MALARIA

2018 ◽  
Vol 10 (9) ◽  
pp. 9
Author(s):  
Suman Ramteke ◽  
Roshni Ubnare ◽  
Naveneet Dubey ◽  
Anjita Singh
Keyword(s):  
Plasma Concentration ◽  
Drug Release ◽  
Zeta Potential ◽  
Cerebral Malaria ◽  
Solid Lipid Nanoparticles ◽  
Intranasal Administration ◽  
Lipid Nanoparticles ◽  
Poloxamer 407 ◽  
Solid Lipid ◽  
The Brain

Objective: Nasal delivery provides a route of entry of drug to the brain that circumvents the obstacle for blood-brain barrier allowing direct drug delivery to the central nervous system via olfactory neurons. The objective of work was to prepare solid lipid nanoparticles of antimalarial drug artemether for brain delivery through olfactory delivery route for treatment of cerebral malaria.Methods: Artemether containing solid lipid nanoparticles were prepared with soya lecithin and poloxamer 407 with a hot homogenization method followed by solvent injection technique. The prepared solid lipid nanoparticles were characterized by their shape, particle size, zeta potential, encapsulation efficiency total drug content and drug release study.Results: These solid lipid nanoparticles were observed spherical in shape in scanning electron microscopy, the optimized size was found to be 211.6 nm (Polydispersity Index PI<0.415), with −27mV zeta potential value. The maximum % yield of the formulation was found to be found 49%. The maximum entrapment efficiency was 82% (w/w), and optimized formulation showed 98.07±1.521% drug release form formulation. In vivo studied were conducted on wistar rats after administration of artemether containing solid lipid nanoparticles intranasally and compared with plain artemether solution administered orally. The results of optimized formulation showed the value of biological half-life (T1/2) was 4.95 h, maximum serum concentration Cmax was 644.60ng/ml, time for drug to reach peak plasma concentration Tmax was 1 h volume of distribution (Vd) was 2.7l/kg, body clearance (Cl) was 0.37 lh/kg and Area under curve [AUC]0∞ was 3970.5 nghr/ml for formulation.Conclusion: The results revealed that the brain: plasma concentration ratio was higher after intranasal administration of solid lipid nanoparticles (SLNs) of artemether than the oral route. In conclusion, the intranasal administration of lipid nanoparticles of artemether could provide complete protection against cerebral malaria.

scholarly journals OPTIMIZATION AND PREPARATION OF SOLID LIPID NANOPARTICLE INCORPORATED TRANSDERMAL PATCH OF TIMOLOL MALEATE USING FACTORIAL DESIGN

2019 ◽  
pp. 100-107
Author(s):  
PARVEEN KUMAR ◽  
BIRENDRA SHRIVASTAVA ◽  
MADAN MOHAN GUPTA ◽  
ANIL KUMAR SHARMA
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Hydroxypropyl Methylcellulose ◽  
Lipid Nanoparticles ◽  
Content Uniformity ◽  
Transdermal Patch ◽  
Timolol Maleate ◽  
Solid Lipid ◽  
Weight Variation

Objective: Transdermal patch of timolol maleate was prepared in order to increase the permeability of the drug topically. Methods: The timolol maleate (TM) loaded solid lipid nanoparticles (SLN) were prepared by the solvent evaporation method. For the optimization process full factorial (three-factor and three-level), hydroxypropyl methylcellulose (HPMC) range from 100 to 300 mg, ethylcellulose 100 to 200 gm and almond oil 3 to 4 ml. The response noted in form of tensile strength and percent drug release. These transdermal patches were evaluated for physical characterization like weight variation, thickness, percentage moisture absorption, percentage moisture loss, water vapor transmission rate, folding endurance, tensile strength, and content uniformity. Results: Solid lipid nanoparticles of TM were optimized and prepared, the data presented that drug release percent ranged from 66.12 to 91.75. 2FI model was observed to fit for response % drug permeation with a p and F value of 0.0271 and 4.50. The tensile strength varies from 0.358 to 0.508. The linear model was observed to fit for the tensile strength response with a p-value and F-value of<0.0001 and 52.41. Conclusion: The controlled release formulation of Timolol Maleate was successfully optimized and prepared, a study conducted to investigate the effect of different polymers and type of permeation time profiles from Timolol Maleate patches.

Sign in / Sign up

Export Citation Format

Share Document