Development of Solid Lipid Nanoparticles of Lamivudine for Brain Targeting

2009 ◽  
Vol 1 (1) ◽  
Author(s):  
Pravin Patil ◽  
Anil Sharma ◽  
Subhash Dadarwal ◽  
Vijay Sharma
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Rotation Speed ◽  
Lipid Nanoparticles ◽  
Brain Targeting ◽  
Brain Penetration ◽  
Solid Lipid ◽  
Diffusion Technique

The objective of present investigation was to enhance brain penetration of Lamivudine, one of the most widely used drugs for the treatment of AIDS. This was achieved through incorporating the drug into solid lipid nanoparticles (SLN) prepared by using emulsion solvent diffusion technique. The formulations were characterized for surface morphology, size and size distribution, percent drug entrapment and drug release. The optimum rotation speed, resulting into better drug entrapment and percent yield, was in the range of 1000-1250 r/min. In vitro cumulative % drug release from optimized SLN formulation was found 40-50 % in PBS (pH-7.4) and SGF (pH-1.2) respectively for 10 h. After 24 h more than 65 % of the drug was released from all formulations in both mediums meeting the requirement for drug delivery for prolong period of time.

scholarly journals ZOLMITRIPTAN BRAIN TARGETING VIA INTRANASAL ROUTE USING SOLID LIPID NANOPARTICLES FOR MIGRAINE THERAPY: FORMULATION, CHARACTERIZATION, IN-VITRO AND IN-VIVO ASSESSMENT

2020 ◽  
pp. 86-93 ◽  
Author(s):  
DALIA A. ELATY MOSTAFA ◽  
MAHA K. A. KHALIFA ◽  
SAMEH. S. GAD
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Brain Targeting ◽  
Histopathological Study ◽  
Solid Lipid ◽  
The Brain

Objective: Zolmitriptan, a class of antidepressant drugs with poor bioavailability due to its first-pass metabolism. The aim of this study was to improve systemic bioavailability and explore the brain targeting impact of nasal Zolmitriptan (Zol) solid lipid nanoparticles (SLNs) gel for migraine treatment.  Methods: Stearic acid and cholesterol used as solid lipid and lecithin as a surfactant, emulsion solvent evaporation technique was used to produce Zolmitriptan SLNs. (Zol) SLNs were characterized for particle size, percent entrapment efficiency and in vitro drug release. Formula S6 showed greater percent entrapment efficiency (PEE), adequate particle size and sustained drug release behavior. Formula S6 was integrated into HPMC gel (3%) to prepare nasal gel. Zol SLN nasal gel was subjected to histopathological study to ensure brain targeting.  Results: It was observed that all prepared Zol SLNs were in the nano-sized range with a polydispersity index of<0.5. In the cholesterol/lecithin combination, higher PEE%, better stability, and less agglomeration inclination were discovered. Results of the release profiles showed that developed Zol-SLNs were able to release Zolmitriptan in a sustained manner. Histopathological study of the brain tissues showed that Zolmitriptan SLN nasal gel can reach brain cells and localized for 24 h although the hydrophobicity of the target drug. Conclusion: Intranasal administration of Solid lipid nanostructure of Zolmitriptan through the olfactory pathway in which it travels from the nasal cavity to brain tissue achieved drug targeting potential of about 90% compared with conventional Zolmitriptan tablets. The small particle size helped them to squeeze themselves through the small opening in the olfactory neurons to the brain via different endo-cystic pathways of neuronal cells in nasal tissue membranes.

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Preparation, Characterization and Optimization of Irbesartan Loaded Solid Lipid Nanoparticles for Oral Delivery

2021 ◽  
pp. 97-104
Author(s):  
Kumara Swamy S ◽  
Ramesh Alli
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Oral Bioavailability ◽  
Oral Delivery ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Sustained Drug Release ◽  
Bioavailability Enhancement ◽  
Solid Lipid

The purpose of this study was to develop and evaluate irbesartan (IS) loaded solid lipid nanoparticles (SLNs; IS-SLNs) that might enhance the oral bioavailability of IS. IS, an angiotensin-receptor antagonist, used to treat hypertension. However, poor aqueous solubility and poor oral bioavailability has limited therapeutic applications of IS. Components of the SLNs include either of trimyristin/tripalmitin/tristearin/trilaurate/stearic acid/beeswax, and surfactants (Poloxamer 188 and soylecithin). The IS-SLNs were prepared by hot homogenization followed by ultrasonication method and evaluated for particle size, poly dispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE), drug content and in vitro drug release. The physical stability of optimized formulation was studied at refrigerated and room temperature for two months. The optimized IS-SLN formulation (F4) had a mean diameter of about 217.6±3.62 nm, PDI of 0.163±0.032, ZP of -28.5±4.12, assay of 99.8±0.51 and EE of 93.68±2.47%. The formulation showed sustained drug release compared with control formulation over 24 h. Optimized formulation was found to be stable over two months. IS-SLN showed nearly spherical in shape using and converted to amorphous form by DSC. Thus, the results conclusively demonstrated SLNs could be considered as an alternative delivery system for the oral bioavailability enhancement of IS.

Effect of Acyclovir Solid Lipid Nanoparticles for the Treatment of Herpes Simplex Virus (HSV) Infection in an Animal Model of HSV-1 Infection

2019 ◽  
Vol 7 (5) ◽  
pp. 389-403 ◽  
Author(s):  
Ritika Kondel ◽  
Nusrat Shafiq ◽  
Indu P. Kaur ◽  
Mini P. Singh ◽  
Avaneesh K. Pandey ◽  
...  
Keyword(s):  
Particle Size ◽  
Single Dose ◽  
Drug Release ◽  
Mouse Model ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Proof Of Concept ◽  
In Vitro Drug Release ◽  
Solid Lipid

Background: Acyclovir use is limited by a high frequency of administration of five times a day and low bioavailability. This leads to poor patient compliance. Objectives: To overcome the problem of frequent dosing, we used nanotechnology platform to evaluate the proof of concept of substituting multiple daily doses of acyclovir with a single dose. Methods: Acyclovir was formulated as solid lipid nanoparticles (SLN). The nanoparticles were characterized for particle size, surface charge and morphology and in vitro drug release. The pharmacokinetic and pharmacodynamic of SLN acyclovir were compared with conventional acyclovir in a mouse model. Results: SLN showed drug loading of 90.22% with 67.44% encapsulation efficiency. Particle size was found to be of 131 ± 41.41 nm. In vitro drug release showed 100% release in SIF in 7 days. AUC0-∞ (119.43 ± 28.74 μg/ml h), AUMC0-∞ (14469 ± 4261.16 μg/ml h) and MRT (120.10 ± 9.21 h) were significantly higher for ACV SLN as compared to ACV AUC0-∞ (12.22 ± 2.47 μg/ml h), AUMC0-∞ (28.78 ± 30.16 μg/ml h) and MRT (2.07 ± 1.77 h), respectively (p<0.05). In mouse model, a single dose of ACV SLN was found to be equivalent to ACV administered as 400mg TID for 5 days in respect to lesion score and time of healing. Conclusion: The proof of concept of sustained-release acyclovir enabling administration as a single dose was thus demonstrated.

scholarly journals Soft Cationic Nanoparticles for Drug Delivery: Production and Cytotoxicity of Solid Lipid Nanoparticles (SLNs)

2019 ◽  
Vol 9 (20) ◽  
pp. 4438 ◽  
Author(s):  
Amélia Silva ◽  
Carlos Martins-Gomes ◽  
Tiago Coutinho ◽  
Joana Fangueiro ◽  
Elena Sanchez-Lopez ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Surface Properties ◽  
Cell Lines ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Cationic Lipids ◽  
Solid Lipid ◽  
Mcf 7

The surface properties of nanoparticles have decisive influence on their interaction with biological barriers (i.e., living cells), being the concentration and type of surfactant factors to have into account. As a result of different molecular structure, charge, and degree of lipophilicity, different surfactants may interact differently with the cell membrane exhibiting different degrees of cytotoxicity. In this work, the cytotoxicity of two cationic solid lipid nanoparticles (SLNs), differing in the cationic lipids used as surfactants CTAB (cetyltrimethylammonium bromide) or DDAB (dimethyldioctadecylammonium bromide), referred as CTAB-SLNs and DDAB-SLNs, respectively, was assessed against five different human cell lines (Caco-2, HepG2, MCF-7, SV-80, and Y-79). Results showed that the cationic lipids used in SLN production highly influenced the cytotoxic profile of the particles, with CTAB-SLNs being highly cytotoxic even at low concentrations (IC50 < 10 µg/mL, expressed as CTAB amount). DDAB-SLNs produced much lower cytotoxicity, even at longer exposure time (IC50 from 284.06 ± 17.01 µg/mL (SV-80) to 869.88 ± 62.45 µg/mL (MCF-7), at 48 h). To the best of our knowledge, this is the first report that compares the cytotoxic profile of CTAB-SLNs and DDAB-SLNs based on the concentration and time of exposure, using different cell lines. In conclusion, the choice of the right surfactant for biological applications influences the biocompatibility of the nanoparticles. Regardless the type of drug delivery system, not only the cytotoxicity of the drug-loaded nanoparticles should be assessed, but also the blank (non-loaded) nanoparticles as their surface properties play a decisive role both in vitro and in vivo.

scholarly journals Formulation and Evaluation of Solid Lipid Nanoparticles of Bifonazole

2020 ◽  
pp. 105-120
Author(s):  
Botre P.P ◽  
Maniyar M.G.
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Fungal Infections ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Gelling Agent ◽  
Rheological Parameters ◽  
Scanning Calorimetry ◽  
Solid Lipid

The objective of this study was to develop suitable solid lipid nanoparticles for topical delivery of Bifonazole. Bifonazole is an imidazole antifungal drug used in form of ointments. It was patented in 1974 and approved for medical use in 1983. Bifonazole having broad spectrum activity against dermatophytes, moulds, yeasts, fungi and some gram positive bacteria. BFZ SLNs systems were developed by melt emulsification followed by solvent evaporation technique using Compritol 888ATO (Glyceryl behenate) as a solid lipid and Tween 80 as a surfactant. Developed SLNs were evaluated for particle size, polydispersity index (PI), entrapment efficiency (EE) and drug release profiles. Process and formulation parameters were optimized. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies were carried out on SLNs to mark the changes in the drug and lipid modifications. The BFZ SLNs based gels were prepared using Carbopol 940 as a gelling agent. The SLNs based gels were evaluated for rheological parameters, in vitro drug release and permeation studies. In vitro antifungal study suggested that the SLNs based gel was more effective in inhibiting growth of Candida albicans. Thus the study concludes that SLNs based gel of BFZ gives a sustained release profile of BFZ and has the potential for treatment of topical fungal infections.

scholarly journals FORMULATION AND OPTIMIZATION OF TERBINAFINE HCl SOLID LIPID NANOPARTICLES FOR TOPICAL ANTIFUNGAL ACTIVITY

2019 ◽  
pp. 16-25 ◽  
Author(s):  
FATMA E. ABOBAKR ◽  
SAHAR M. FAYEZ ◽  
VIVIAN S. ELWAZZAN ◽  
WEDAD SAKRAN
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Antifungal Activity ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Lipid Concentration ◽  
Solid Lipid ◽  
Morphological Studies ◽  
Terbinafine Hcl

Objective: Solid lipid nanoparticles (SLNs) are at the forefront of the rapidly developing field of nanotechnology with several potential applications in drug delivery and research. The aim of this study was to develop and characterize SLNs formulae of Terbinafine HCl (TFH) for topical drug delivery applications. Methods: SLNs were prepared using the solvent injection technique. Glyceryl Monostearate (GMS) served as the lipid base. Three stabilizers; Tween 80, Cremophor RH40, and Poloxamer 188, were used. The effect of stabilizer type and concentration, as well as the lipid concentration, were studied, factorial design of 32*21was applied. The prepared SLNs were characterized regarding their particle size, zeta potential, polydispersity index (PDI), entrapment efficiency percent (EE %), and physicochemical stability. The selected formulae were subjected to further investigations such as morphological studies, in vitro release studies, and Infrared (IR) spectroscopy. They were compared with the marketed cream Lamifen® in term of their antifungal activity against Candida albicans. Results: Lipid concentration, together with the type and concentration of stabilizer, appeared to be the main cornerstones which affect the formation of SLNs. Smaller particle size was observed when increasing the stabilizer concentration and decreasing the lipid concentration. Higher EE% was observed when increasing both the stabilizer and the lipid concentrations. Formulae (F6, F12 andF19) were selected as the most suitable SLNs with optimum particle size of 480.2±18.89, 458.6±12.45 and 246.7±10.5 nm, respectively as well as the highest EE% of 87.13±0.19, 93.69±0.7 and 95.06±0.25, respectively. In vitro microbiological screening of their antifungal activity showed significantly larger zones of inhibition of diameters 25.9±0.25, 25±0.35 and 24.67±0.36 mm, respectively in comparison with the marketed Lamifen® cream which showed a zone of 11.2±0.44 mm diameter. Conclusion: Applying SLNs containing TFH as topical antifungal preparations may be considered as a very promising option as they show good physicochemical characterization with high antifungal activity, which delineates them as a promising dosage form for topical antifungal treatment.

Sign in / Sign up

Export Citation Format

Share Document