scholarly journals Advances in Laser Additive Manufacturing of Ti-Nb Alloys: From Nanostructured Powders to Bulk Objects

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1159
Author(s):  
Margarita A. Khimich ◽  
Konstantin A. Prosolov ◽  
Tatiana Mishurova ◽  
Sergei Evsevleev ◽  
Xavier Monforte ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Volume Fraction ◽  
Surface Profile ◽  
Total Porosity ◽  
Mg63 Cell ◽  
In Vivo Studies ◽  
Interconnected System ◽  
Porous Ti

The additive manufacturing of low elastic modulus alloys that have a certain level of porosity for biomedical needs is a growing area of research. Here, we show the results of manufacturing of porous and dense samples by a laser powder bed fusion (LPBF) of Ti-Nb alloy, using two distinctive fusion strategies. The nanostructured Ti-Nb alloy powders were produced by mechanical alloying and have a nanostructured state with nanosized grains up to 90 nm. The manufactured porous samples have pronounced open porosity and advanced roughness, contrary to dense samples with a relatively smooth surface profile. The structure of both types of samples after LPBF is formed by uniaxial grains having micro- and nanosized features. The inner structure of the porous samples is comprised of an open interconnected system of pores. The volume fraction of isolated porosity is 2 vol. % and the total porosity is 20 vol. %. Cell viability was assessed in vitro for 3 and 7 days using the MG63 cell line. With longer culture periods, cells showed an increased cell density over the entire surface of a porous Ti-Nb sample. Both types of samples are not cytotoxic and could be used for further in vivo studies.

Solubility and Ingrowth Behaviour of Degradable and Figuline Calcium Alkaline Phosphate Cements

2011 ◽  
Vol 493-494 ◽  
pp. 387-390 ◽  
Author(s):  
F. Dombrowski ◽  
Heidi Marx ◽  
Ute Ploska ◽  
D. Nicolaides ◽  
M. Stiller ◽  
...  
Keyword(s):  
Crystalline Phase ◽  
Potassium Phosphate ◽  
Total Porosity ◽  
In Vivo Studies ◽  
Buffer Solution ◽  
Degradation Behaviour ◽  
Sheep Model ◽  
Alkaline Phosphate

The thrust of the investigations presented here is to point out the degradation behaviour in vitro and the ingrowth behaviour in vivo of four different calcium alkaline phosphate cements. Two of the figuline and mouldable composites consist of the crystalline phase Ca2KNa(PO4)2 and two of the crystalline phase Ca10[K/Na](PO4)2 each containing 2wt% medium gel strength porcine gelatin. Furthermore Α-TCP was added to both Ca10[K/Na](PO4)2 cements as a hardening supporting reactant. The testing material groups differ in small amorphous portions containing either silica phosphate (GB9), magnesium potassium phosphate (GB14) or diphosphates (401545 and 401545(70)). The respective composites show a monomodal particle size distribution (d50~7µm; span~4) and an average total porosity around 28vol%.For the solubility studies cylindrical samples (d=6mm; h=12mm) were stored in a 0.1mol TRIS buffer solution and incubated at 37°C for maximum 50 weeks. The storage solution was analysed and renewed every week. The results are plotted cumulative. For the in vivo studies critical size defects were dissected to mandibles in a sheep model in which a 1cm3 area of the bottom of the mandibles was surgically resected and replaced with the figuline cements whereas the mouldability allows the reconstruction of the original outer contour without draining off even when replacing upside down.

Additively manufactured titanium alloys and effect of hydroxyapatite coating for biomedical applications: A review

2020 ◽  
Vol 234 (11) ◽  
pp. 1450-1460
Author(s):  
Franklin Anene ◽  
Jaafar Aiza ◽  
Ismail Zainol ◽  
Azmah Hanim ◽  
Mohd Tahir Suraya
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Titanium Alloys ◽  
Biomedical Applications ◽  
Hydroxyapatite Coating ◽  
In Vivo Studies ◽  
Processing Technologies ◽  
Treatment Processes

Metallic implants are extensively used to treat a spectrum of orthopaedic related disorders. Among the metals, titanium and its alloys are considered most excellent and indispensable material for the production of orthopaedic implants regarding their sterling mechanical properties and exceptional biocompatibility. Recently, rapid progress in developing non-toxic titanium-based alloys with modulus similar to that of human bone has inspired researchers globally. Thus, many studies have focused on titanium alloys, their heat treatment processes and several processing technologies. Additive manufacturing has been designed to enhance their mechanical properties tailored towards biomedical applications. Inarguably, the need to further improve on the implant’s biocompatibility with bodily environment for optimum service life is of great importance. Hence, hydroxyapatite coating provides an improvement as demonstrated by in vitro as well as in vivo studies. The present article critically reviews, based on recent scientific literatures, the progress made thus far in the development of titanium-based alloys, additive manufacturing processes and their heat and surface treatments tailored towards biomedical applications.

In vitro and in vivo studies of new cationic Zn(II)‐benzonaphthoporphyrazines as photosensitizers for PDT

2001 ◽  
Vol 5 (8) ◽  
pp. 645-651
Author(s):  
M. Peeva ◽  
M. Shopova ◽  
U. Michelsen ◽  
D. Wöhrle ◽  
G. Petrov ◽  
...  
Keyword(s):  
In Vivo Studies

Effect of caffeine on theophyliine on cerebral blood flow response to brain activation: In vitro and in vivo studies

2005 ◽  
Vol 25 (1_suppl) ◽  
pp. S198-S198
Author(s):  
Joseph R Meno ◽  
Thien-son K Nguyen ◽  
Elise M Jensen ◽  
G Alexander West ◽  
Leonid Groysman ◽  
...  
Keyword(s):  
Blood Flow ◽  
Cerebral Blood Flow ◽  
Brain Activation ◽  
In Vivo Studies ◽  
Blood Flow Response ◽  
Flow Response

Effects of Unfractionated and Low Molecular Weight Heparins on Platelet Thromboxane Biosynthesis “In Vivo”

1994 ◽  
Vol 72 (06) ◽  
pp. 942-946 ◽  
Author(s):  
Raffaele Landolfi ◽  
Erica De Candia ◽  
Bianca Rocca ◽  
Giovanni Ciabattoni ◽  
Armando Antinori ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Unfractionated Heparin ◽  
Low Molecular Weight Heparin ◽  
Primary Source ◽  
In Vivo Studies ◽  
Low Molecular Weight ◽  
Heparin Administration ◽  
To Receive

SummarySeveral “in vitro” and “in vivo” studies indicate that heparin administration may affect platelet function. In this study we investigated the effects of prophylactic heparin on thromboxane (Tx)A2 biosynthesis “in vivo”, as assessed by the urinary excretion of major enzymatic metabolites 11-dehydro-TxB2 and 2,3-dinor-TxB2. Twenty-four patients who were candidates for cholecystectomy because of uncomplicated lithiasis were randomly assigned to receive placebo, unfractionated heparin, low molecular weight heparin or unfractionaed heparin plus 100 mg aspirin. Measurements of daily excretion of Tx metabolites were performed before and during the treatment. In the groups assigned to placebo and to low molecular weight heparin there was no statistically significant modification of Tx metabolite excretion while patients receiving unfractionated heparin had a significant increase of both metabolites (11-dehydro-TxB2: 3844 ± 1388 vs 2092 ±777, p <0.05; 2,3-dinor-TxB2: 2737 ± 808 vs 1535 ± 771 pg/mg creatinine, p <0.05). In patients randomized to receive low-dose aspirin plus unfractionated heparin the excretion of the two metabolites was largely suppressed thus suggesting that platelets are the primary source of enhanced thromboxane biosynthesis associated with heparin administration. These data indicate that unfractionated heparin causes platelet activation “in vivo” and suggest that the use of low molecular weight heparin may avoid this complication.

Effectiveness of the integration of quercetin, turmeric, and N-acetylcysteine in reducing inflammation and pain associated with endometriosis. In-vitro and in-vivo studies

2020 ◽  
Vol 72 (5) ◽  
Author(s):  
Mario Fadin ◽  
Maria C. Nicoletti ◽  
Marzia Pellizzato ◽  
Manuela Accardi ◽  
Maria G. Baietti ◽  
...  
Keyword(s):  
In Vivo Studies
Sign in / Sign up

Export Citation Format

Share Document