scholarly journals Room-Temperature Solution-Processed 0D/1D Bilayer Electrodes for Translucent CsPbBr3 Perovskite Photovoltaics

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1489
Author(s):  
Bhaskar Parida ◽  
Saemon Yoon ◽  
Dong-Won Kang
Keyword(s):  
Solar Cells ◽  
Indium Tin Oxide ◽  
High Performance ◽  
Room Temperature ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Ambient Air ◽  
Plasma Damage ◽  
Temperature Solution ◽  
Ito Nanoparticles

Materials and processing of transparent electrodes (TEs) are key factors to creating high-performance translucent perovskite solar cells. To date, sputtered indium tin oxide (ITO) has been a general option for a rear TE of translucent solar cells. However, it requires a rather high cost due to vacuum process and also typically causes plasma damage to the underlying layer. Therefore, we introduced TE based on ITO nanoparticles (ITO-NPs) by solution processing in ambient air without any heat treatment. As it reveals insufficient conductivity, Ag nanowires (Ag-NWs) are additionally coated. The ITO-NPs/Ag-NW (0D/1D) bilayer TE exhibits a better figure of merit than sputtered ITO. After constructing CsPbBr3 perovskite solar cells, the device with 0D/1D TE offers similar average visible transmission with the cells with sputtered ITO. More interestingly, the power conversion efficiency of 0D/1D TE device was 5.64%, which outperforms the cell (4.14%) made with sputtered-ITO. These impressive findings could open up a new pathway for the development of low-cost, translucent solar cells with quick processing under ambient air at room temperature.

An efficacious multifunction codoping strategy on a room-temperature solution-processed hole transport layer for realizing high-performance perovskite solar cells

2021 ◽  
Vol 9 (1) ◽  
pp. 371-379
Author(s):  
Dan Ouyang ◽  
Jiawei Zheng ◽  
Zhanfeng Huang ◽  
Lu Zhu ◽  
Wallace C. H. Choy
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Room Temperature ◽  
Perovskite Solar Cells ◽  
Hole Transport ◽  
Post Treatment ◽  
Transport Layer ◽  
Hole Transport Layer ◽  
Solution Processed ◽  
Temperature Solution

A simple room-temperature solution-based and post-treatment-free processed (Li, Cu):NiOx HTL is successfully demonstrated for high-performance rigid and flexible perovskite solar cells.

Construction and mechanistic understanding of high-performance all-air-processed perovskite solar cells via mixed-cation engineering

2021 ◽  
Author(s):  
Wenyuan Zhang ◽  
Lang He ◽  
Yuanchao Li ◽  
Dongyan Tang ◽  
Xin Li ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Manufacturing Processes ◽  
Mixed Cation ◽  
Mechanistic Understanding

All-air-processed perovskite solar cells (PSCs) have attracted increasing attention due to low cost and simplified manufacturing processes. At present, to fabricate efficient and stable PSCs in the air is expected....

Facile preparation of smooth perovskite films for efficient meso/planar hybrid structured perovskite solar cells

2015 ◽  
Vol 51 (49) ◽  
pp. 10038-10041 ◽  
Author(s):  
Meng Zhang ◽  
Hua Yu ◽  
Jung-Ho Yun ◽  
Miaoqiang Lyu ◽  
Qiong Wang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Ambient Air ◽  
Drying Method ◽  
Facile Preparation ◽  
Halide Perovskite ◽  
Organolead Halide

Smooth organolead halide perovskite films were prepared by a facile blow-drying method in ambient air for achieving efficient and low cost meso/planar hybrid structured perovskite solar cells.

scholarly journals Ambient Air Temperature Assisted Crystallization for Inorganic CsPbI2Br Perovskite Solar Cells

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3398
Author(s):  
Yi Long ◽  
Kun Liu ◽  
Yongli Zhang ◽  
Wenzhe Li
Keyword(s):  
Solar Cells ◽  
Air Temperature ◽  
High Performance ◽  
Defect Density ◽  
Perovskite Solar Cells ◽  
Ambient Air ◽  
Dark Phase ◽  
High Quality ◽  
Ambient Air Temperature ◽  
Air Atmosphere

Inorganic cesium lead halide perovskites, as alternative light absorbers for organic–inorganic hybrid perovskite solar cells, have attracted more and more attention due to their superb thermal stability for photovoltaic applications. However, the humid air instability of CsPbI2Br perovskite solar cells (PSCs) hinders their further development. The optoelectronic properties of CsPbI2Br films are closely related to the quality of films, so preparing high-quality perovskite films is crucial for fabricating high-performance PSCs. For the first time, we demonstrate that the regulation of ambient temperature of the dry air in the glovebox is able to control the growth of CsPbI2Br crystals and further optimize the morphology of CsPbI2Br film. Through controlling the ambient air temperature assisted crystallization, high-quality CsPbI2Br films are obtained, with advantages such as larger crystalline grains, negligible crystal boundaries, absence of pinholes, lower defect density, and faster carrier mobility. Accordingly, the PSCs based on as-prepared CsPbI2Br film achieve a power conversion efficiency of 15.5% (the maximum stabilized power output of 15.02%). Moreover, the optimized CsPbI2Br films show excellent robustness against moisture and oxygen and maintain the photovoltaic dark phase after 3 h aging in an air atmosphere at room temperature and 35% relative humidity (R.H.). In comparison, the pristine films are completely converted to the yellow phase in 1.5 h.

A low-cost polymerized hole-transporting material for high performance planar perovskite solar cells

2021 ◽  
Vol 119 (13) ◽  
pp. 133904
Author(s):  
Binbin Wang ◽  
Lingwei Xue ◽  
Shiqi Wang ◽  
Yao Li ◽  
Lele Zang ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Hole Transporting ◽  
Hole Transporting Material
Sign in / Sign up

Export Citation Format

Share Document