scholarly journals Concept for Efficient Light Harvesting in Perovskite Materials via Solar Harvester with Multi-Functional Folded Electrode

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3362
Author(s):  
Mao-Qugn Wei ◽  
Yu-Sheng Lai ◽  
Po-Hsien Tseng ◽  
Mei-Yi Li ◽  
Cheng-Ming Huang ◽  
...  

Conventional electrodes in typical photodetectors only conduct electrical signals and introduce high optical reflection, impacting the optical-to-electrical conversion efficiency. The created surface solar harvester with a multi-functional folded electrode (MFFE) realizes both a three-dimensional Schottky junction with a larger light detecting area as well as low optical reflection from 300 nm (ultra-violet light) to 1100 nm (near-infrared light) broadly without an additional anti-reflection layer. The MFFE needs silicon etching following the lithography process. The metal silver was deposited over structured silicon, completing the whole device simply. According to the experimental results, the width ratio of the bottom side to the top side in MFFE was 15.75, and it showed an optical reflection of 5–7% within the major solar spectrum of AM1.5G by the gradient refractive index effect and the multi-scattering phenomenon simultaneously. While the perovskite materials were deposited over the MFFE structure of the solar harvester, the three-dimensional electrode with lower optical reflection benefitted the perovskite solar cell with a larger detecting area and an additional anti-reflection function to absorb solar energy more efficiently. In this concept, because of the thin stacked film in the perovskite solar cell, the solar energy could be harvested by the prepared Schottky junction of the solar harvester again, except for the optical absorption of the perovskite materials. Moreover, the perovskite materials deposited over the MFFE structure could not absorb near-infrared (NIR) energies to become transparent. The NIR light could be harvested by the light detecting junction of the solar harvester to generate effective photocurrent output additionally for extending the detection capability of perovskite solar cell further. In this work, the concept of integration of a conventional perovskite solar cell with a silicon-based solar harvester having an MFFE structure was proposed and is expected to harvest broadband light energies under low optical reflection and enhance the solar energy conversion efficiency.

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Syed Sajjad Hussain ◽  
Saira Riaz ◽  
Ghazi Aman Nowsherwan ◽  
Khizer Jahangir ◽  
Akram Raza ◽  
...  

The highest power conversion efficiency (PCE) for organic-inorganic perovskite solar cells based on lead is reported as 25.2% in 2019. Lead-based hybrid perovskite materials are used in several photovoltaics applications, but these are not highly favored due to the toxicity of lead and volatility of organic cations. On the other hand, hybrid lead-free double perovskite has no such harm. In this research study, SCAPS numerical simulation is utilized to evaluate and compare the results of perovskite solar cell based on double perovskite FA 2 BiCuI 6 and standard perovskite CH 3 NH 3 PbI 3 as an active layer. The results show that the power conversion efficiency obtained in the case of FA 2 BiCuI 6 is 24.98%, while in the case of CH 3 NH 3 PbI 3 , it is reported as 26.42%. This indicates that the hybrid organic-inorganic double perovskite FA 2 BiCuI 6 has the ability to replace hybrid organic-inorganic perovskite CH 3 NH 3 PbI 3 to expand next-generation lead-free harmless materials for solar cell applications.


2022 ◽  
Author(s):  
Ehsan Elahi ◽  
Ghulam Dastgeer ◽  
Abdul Subhan Siddiqui ◽  
Supriya A. Patil ◽  
Muhammad Waqas Iqbal ◽  
...  

With perovskite materials, rapid progress in power conversion efficiency (PCE) to reach 25% has gained a significant amount of attention from the solar cell industry.


2015 ◽  
Vol 730 ◽  
pp. 173-177
Author(s):  
Yu Wen Tang

Solar energy is an inexhaustible and renewable energy without environmental pollution. Solar energy can be used in three kinds of forms: solar thermal energy, photochemical conversion and photovoltaic power generation. Among these, the final form of photovoltaic power generation is electricity which can be transported, applied and stored conveniently. On the basis of photovoltaic effect, solar cell is developed as a new technology to convert light energy into electrical energy using semiconductor. Up to now the two key problems of the development of solar cells are how to improve the conversion efficiency and reduce cost. Therefore, the material and production technology used for solar cells are discussed based on improving conversion efficiency in this article.


Sign in / Sign up

Export Citation Format

Share Document