scholarly journals The Enhanced Red Emission and Improved Thermal Stability of CaAlSiN3:Eu2+ Phosphors by Using Nano-EuB6 as Raw Material

Nanomaterials ◽  
2018 ◽  
Vol 8 (2) ◽  
pp. 66 ◽  
Author(s):  
Wen-Quan Liu ◽  
Dan Wu ◽  
Hugejile Chang ◽  
Ru-Xia Duan ◽  
Wen-Jie Wu ◽  
...  
2022 ◽  
Vol 241 ◽  
pp. 118504
Author(s):  
Zhongxu Han ◽  
Shuchen Lü ◽  
Qingyu Meng ◽  
Mengsi Sun ◽  
Yandong Ren

2015 ◽  
Vol 39 (4) ◽  
pp. 348-354 ◽  
Author(s):  
Mário Vanoli Scatolino ◽  
Thiago de Paula Protásio ◽  
Rafael Farinassi Mendes ◽  
Lourival Marin Mendes

Agricultural waste materials are generated in large quantities in Brazil. These can accumulate and cause serious environmental problems. One of the most commonly generated wastes in the brazilian agricultural culture is the maize cob. Being lignocellulosic in nature, the maize cob can find use as the raw material in the production of particleboards mainly concerned with furniture making. Therefore, studies regarding its thermal stability and fire resistance would be interesting. The aim of this study was to evaluate the combustibility and thermal stability of the particleboards produced from maize cob and Pinus oocarpa wood. The percentages in which maize cob was associated with Pinus oocarpa were 0%, 25%, 50%, 75% and 100%. The panels were produced using 8% urea-formaldehyde and 1% paraffin. The pressing cycle parameters included: temperature 150 °C, pressure of 3.92 MPa during 10 min. The combustibility curve analysis showed that the panels containing 25% content of maize cob had higher resistance to combustion. In general, the thermal stability decreased as the wood substitution by maize cob increased.


2015 ◽  
Vol 815 ◽  
pp. 193-197 ◽  
Author(s):  
Abdul Mutalib Leman ◽  
Dafit Feriyanto ◽  
M.N.M. Salleh ◽  
Ishak Baba

Metallic Fe80Cr20 alloy in thermal stability analysis is investigated. Approached method is combination technique (milled and UT) of ball milling (milled) combined with ultrasonic technique (UT) which is not yet fully explored. From Energy Dispersive x-ray Spectroscopy (EDS) analysis resulted that the composition of 80 wt% Fe and 20 wt% Cr in individual particle was achieved at milled and UB 4.5 h sample. Higher thermal stability of treated samples approximately 63% at 1100 °C temperature operation which showed by milled and UT at 4.5 h when compared to raw material. Combination technique shown high prospect to advance exploration in improving thermal stability which suitable for interconnect application.


2015 ◽  
Vol 8 (7) ◽  
pp. 072603 ◽  
Author(s):  
Rie Suzuki ◽  
Yoshihiro Takahashi ◽  
Kenichiro Iwasaki ◽  
Nobuaki Terakado ◽  
Takumi Fujiwara

Holzforschung ◽  
2016 ◽  
Vol 70 (5) ◽  
pp. 467-474 ◽  
Author(s):  
Paulo Ivan Andrade ◽  
Solange de Oliveira Araújo ◽  
Duarte Miranda Neiva ◽  
Benedito Rocha Vital ◽  
Angélica de Cássia Oliveira Carneiro ◽  
...  

Abstract Wood-based panels made of waste and recycled raw material are lacking of dimensional stability. The aim of this study is to evaluate the potential beneficial effect of heat treatment (HT) on the properties of particleboards produced from waste of Pinus sp. used for packaging. The wood particles were heat treated at 180°C, 200°C and 220°C after grinding, and panels were produced with incorporation of 25%, 50%, 75% and 100% HT particles. The materials served as reference were particles without HT. Mass loss at 180°C and 200°C was small but increased significantly to 10.6% at 220°C. The HT caused a partial degradation of hemicelluloses, thereby the relative lignin content increased from 29.7% to 37.8% for the HT220°C samples. Thermogravimetry revealed higher thermal stability of the HT particles. The equilibrium moisture content decreased with HT, e.g. panels with HT220°C showed 30% lower compared to the reference. Swelling of the panels was lowered by 30% (panel with 75% HT material) compared to the reference. The results with HT pine were successful in terms of dimensional stability and lower hygroscopicity; however, the panels lost some strength properties.


10.5219/1297 ◽  
2020 ◽  
Vol 14 ◽  
pp. 535-543
Author(s):  
Petr Mrázek ◽  
Robert Gál ◽  
Pavel Mokrejš ◽  
Ondřej Krejčí ◽  
Jana Orsavová

Gelatine is, due to its functional properties, currently widely used not only in the food industry (in the production of confectionery, dairy products, canned food) but also in pharmacy (soft and hard capsules) and cosmetics (creams, lotions) where it applies its ability to form thermoreversible gel stronger than most other gelling agents. What is more, it provides further excellent properties including emulsifying, foaming, stabilizing, film-forming, water and fat binding, texturizing, thickening, and adhesive attributes which makes it a very important hydrocolloid. Gelatine is obtained from the raw material of animal tissues containing collagen, usually mammalian skin or bones. For religious reasons in some countries, pork or bovine gelatine must be replaced by an alternative form, such as poultry or fish gelatine. The quality of gelatine is assessed mostly by the strength of gelatine gel which strongly depends on ambient temperature or humidity. Extraction conditions may also significantly affect the quality of gelatine. This study examined possible changes in the strength of gelatine gels prepared from laboratory-produced chicken feet gelatine and compared them with commercially available pork and beef gelatines at temperatures of 23, 29, and 35 °C at 60 and 80% humidity. While at 23 °C thermal stability of prepared chicken gelatine was monitored higher than in commercial gelatines, experiments at 29 and 35 °C provided equivalent results for chicken and commercial gelatines. Therefore, prepared chicken gelatine offers a significant potential to become an alternative to traditional gelatines. The information about gelatine gels thermal stability is of great importance for applications not only in the food; but also in the pharmaceutical industry.


2018 ◽  
Vol 69 (4) ◽  
pp. 809-814
Author(s):  
Monica Catana ◽  
Luminita Catana ◽  
Enuta Iorga ◽  
Alina Culetu ◽  
Valentin Ionescu ◽  
...  

Apples are an important raw material for the production of puree, nectar, jam, and a widely used ingredient in composition of pastry products. Patulin is a mycotoxin that appears in moldy apples, especially, attacked by Penicillium, Aspergillus and Byssochlamys. This study aimed to evaluate the thermal stability of patulin in apple puree and the possibilities to reduce the patulin contamination level through processing apples to apple puree and nectar. Within the experiments, samples of apple puree from Jonathan apple cultivar, spiked with patulin at four concentration levels (10 mg/kg, 20 mg/kg 40 mg/kg and 80 mg/kg) were heat treated at 100 �C for 10, 15, 20 and 25 min, respectively. It was found a reduction of the patulin level, due to the thermal degradation of this mycotoxin. Apples from Golden Delicious cultivar, attacked by Penicillium expansum and contaminated with native patulin were processed to puree and nectar. Through processing of apples contaminated with patulin it was registered an important decrease of it.


2020 ◽  
Vol 7 (4) ◽  
pp. 177-179
Author(s):  
I. V. Tsvetkova ◽  
A. A. Golovanov ◽  
N. S. Reznikova ◽  
N. V. Chirkunova

It has been shown that adipic acid released from the by-products of caprolactam production is a promising raw material for the production of cyclopentanone. The thermal stability of calcium adipate was investigated by the derivatographic method and the conditions were selected that ensure the yield of at least 50% of the target cyclopentanone with a purity of at least 99%.


2015 ◽  
Vol 19 (4) ◽  
pp. 1323-1326 ◽  
Author(s):  
Meng-Jie Qi ◽  
Yong-Fang Qian ◽  
Yu-Ping Zhao ◽  
Wei Ju

This paper studied the thermal behavior of gelatin, chitosan, and their complex. Thermal stability was analyzed by thermogravimetric analysis, and the results showed that gelatin and chitosan raw materials exhibited two decomposition stages while as-electrospun nanofibrous mats had three decomposition stages. Moreover, chitosan raw material had better thermal stability than gelatin. However, its electrospun partner revealed its opposite trend. X-ray diffraction was used to analyze the crystalline property and the result showed that the crystallinity decreased due to the interaction with the solvents, and thus the thermal stability sharply decreased. In addition, incorporation of gelatin could improve the thermal stability of chitosan.


2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Bruno Merk

The use of fine distributed moderating material to enhance the feedback effects and to reduce the sodium void effect in sodium-cooled fast reactor cores is described. The influence of the moderating material on the fuel assembly geometry, the neutron spectrum, the feedback effects, the power and burnup distribution, and the transmutation performance is given. An overview on possible materials is provided and the relationship between hydrogen content and thermal stability is described. A solution for the problem of the limited thermal stability of primarily proposed hydrogen-bearing moderating material ZrH1.6is developed by the use of yttrium-mono-hydride. The similarity in the effects reached by ZrH and YH is demonstrated by comparison calculations. The topic is closed by an overview on material properties, manufacturing issues, experience in fast reactors, and a comparison of raw material costs.


Sign in / Sign up

Export Citation Format

Share Document