Affinity Effects on the Release of Non-Conventional Antifibrotics from Polymer Depots

For many chronic fibrotic conditions, there is a need for local, sustained antifibrotic drug delivery. A recent trend in the pharmaceutical industry is the repurposing of approved drugs. This paper investigates drugs that are classically used for anthelmintic activity (pyrvinium pamoate (PYR)), inhibition of adrenal steroidgenesis (metyrapone (MTP)), bactericidal effect (rifampicin (RIF), and treating iron/aluminum toxicity (deferoxamine mesylate (DFOA)), but are also under investigation for their potential positive effect in wound healing. In this role, they have not previously been tested in a localized delivery system suitable for obtaining the release for the weeks-to-months timecourse needed for wound resolution. Herein, two cyclodextrin-based polymer systems, disks and microparticles, are demonstrated to provide the long-term release of all four tested non-conventional wound-healing drugs for up to 30 days. Higher drug affinity binding, as determined from PyRx binding simulations and surface plasmon resonance in vitro, corresponded with extended release amounts, while drug molecular weight and solubility correlated with the improved drug loading efficiency of cyclodextrin polymers. These results, combined, demonstrate that leveraging affinity interactions, in combination with drug choice, can extend the sustained release of drugs with an alternative, complimentary action to resolve wound-healing and reduce fibrotic processes.

Download Full-text

Development of Spanish Broom and Flax Dressings with Glycyrrhetinic Acid-Loaded Films for Wound Healing: Characterization and Evaluation of Biological Properties

Pharmaceutics ◽

10.3390/pharmaceutics13081192 ◽

2021 ◽

Vol 13 (8) ◽

pp. 1192

Author(s):

Angela Abruzzo ◽

Concettina Cappadone ◽

Valentina Sallustio ◽

Giovanna Picone ◽

Martina Rossi ◽

...

Keyword(s):

Wound Healing ◽

Drug Loading ◽

Healing Process ◽

In Vitro Release ◽

Sodium Hyaluronate ◽

Biological Properties ◽

Glycyrrhetinic Acid ◽

Wound Dressings ◽

Biological Studies

The selection of an appropriate dressing for each type of wound is a very important procedure for a faster and more accurate healing process. So, the aim of this study was to develop innovative Spanish Broom and flax wound dressings, as alternatives to cotton used as control, with polymeric films containing glycyrrhetinic acid (GA) to promote wound-exudate absorption and the healing process. The different wound dressings were prepared by a solvent casting method, and characterized in terms of drug loading, water uptake, and in vitro release. Moreover, biological studies were performed to evaluate their biocompatibility and wound-healing efficacy. Comparing the developed wound dressings, Spanish Broom dressings with GA-loaded sodium hyaluronate film had the best functional properties, in terms of hydration ability and GA release. Moreover, they showed a good biocompatibility, determining a moderate induction of cell proliferation and no cytotoxicity. In addition, the wound-healing test revealed that the Spanish Broom dressings promoted cell migration, further facilitating the closure of the wound.

Download Full-text

Development of Cephradine-Loaded Gelatin/Polyvinyl Alcohol Electrospun Nanofibers for Effective Diabetic Wound Healing: In-Vitro and In-Vivo Assessments

Pharmaceutics ◽

10.3390/pharmaceutics13030349 ◽

2021 ◽

Vol 13 (3) ◽

pp. 349

Author(s):

Anam Razzaq ◽

Zaheer Ullah Khan ◽

Aasim Saeed ◽

Kiramat Ali Shah ◽

Naveed Ullah Khan ◽

...

Keyword(s):

Wound Healing ◽

Polyvinyl Alcohol ◽

Mtt Assay ◽

Chronic Wound ◽

Drug Loading ◽

Group Identification ◽

Wound Infections ◽

Diabetic Wound

Diabetic wound infections caused by conventional antibiotic-resistant Staphylococcus aureus strains are fast emerging, leading to life-threatening situations (e.g., high costs, morbidity, and mortality) associated with delayed healing and chronic inflammation. Electrospinning is one of the most widely used techniques for the fabrication of nanofibers (NFs), induced by a high voltage applied to a drug-loaded polymer solution. Particular attention is given to electrospun NFs for pharmaceutical applications (e.g., original drug delivery systems) and tissue regeneration (e.g., as tissue scaffolds). However, there is a paucity of reports related to their application in diabetic wound infections. Therefore, we prepared eco-friendly, biodegradable, low-immunogenic, and biocompatible gelatin (GEL)/polyvinyl alcohol (PVA) electrospun NFs (BNFs), in which we loaded the broad-spectrum antibiotic cephradine (Ceph). The resulting drug-loaded NFs (LNFs) were characterized physically using ultraviolet-visible (UV-Vis) spectrophotometry (for drug loading capacity (LC), drug encapsulation efficiency (EE), and drug release kinetics determination), thermogravimetric analysis (TGA) (for thermostability evaluation), scanning electron microscopy (SEM) (for surface morphology analysis), and Fourier-transform infrared spectroscopy (FTIR) (for functional group identification). LNFs were further characterized biologically by in-vitro assessment of their potency against S. aureus clinical strains (N = 16) using the Kirby–Bauer test and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, by ex-vivo assessment to evaluate their cytotoxicity against primary human epidermal keratinocytes using MTT assay, and by in-vivo assessment to estimate their diabetic chronic wound-healing efficiency using NcZ10 diabetic/obese mice (N = 18). Thin and uniform NFs with a smooth surface and standard size (<400 nm) were observed by SEM at the optimized 5:5 (GEL:PVA) volumetric ratio. FTIR analyses confirmed the drug loading into BNFs. Compared to free Ceph, LNFs were significantly more thermostable and exhibited sustained/controlled Ceph release. LNFs also exerted a significantly stronger antibacterial activity both in-vitro and in-vivo. LNFs were significantly safer and more efficient for bacterial clearance-induced faster chronic wound healing. LNF-based therapy could be employed as a valuable dressing material to heal S. aureus-induced chronic wounds in diabetic subjects.

Download Full-text

The Efficacy of Silver-Based Electrospun Antimicrobial Dressing in Accelerating the Regeneration of Partial Thickness Burn Wounds Using a Porcine Model

Polymers ◽

10.3390/polym13183116 ◽

2021 ◽

Vol 13 (18) ◽

pp. 3116

Author(s):

Thien Do ◽

Tien Nguyen ◽

Minh Ho ◽

Nghi Nguyen ◽

Thai Do ◽

...

Keyword(s):

Wound Healing ◽

Burn Injury ◽

Healing Process ◽

Bactericidal Effect ◽

Wound Healing Process ◽

Burn Wounds ◽

Partial Thickness Burn ◽

Tissue Damages

(1) Background: Wounds with damages to the subcutaneous are difficult to regenerate because of the tissue damages and complications such as bacterial infection. (2) Methods: In this study, we created burn wounds on pigs and investigated the efficacy of three biomaterials: polycaprolactone-gelatin-silver membrane (PCLGelAg) and two commercial burn dressings, Aquacel® Ag and UrgoTulTM silver sulfadiazine. In vitro long-term antibacterial property and in vivo wound healing performance were investigated. Agar diffusion assays were employed to evaluate bacterial inhibition at different time intervals. Minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and time-kill assays were used to compare antibacterial strength among samples. Second-degree burn wounds in the pig model were designed to evaluate the efficiency of all dressings in supporting the wound healing process. (3) Results: The results showed that PCLGelAg membrane was the most effective in killing both Gram-positive and Gram-negative bacteria bacteria with the lowest MBC value. All three dressings (PCLGelAg, Aquacel, and UrgoTul) exhibited bactericidal effect during the first 24 h, supported wound healing as well as prevented infection and inflammation. (4) Conclusions: The results suggest that the PCLGelAg membrane is a practical solution for the treatment of severe burn injury and other infection-related skin complications.

Download Full-text

New Role for FDA-Approved Drugs in Combating Antibiotic-Resistant Bacteria

Antimicrobial Agents and Chemotherapy ◽

10.1128/aac.00326-16 ◽

2016 ◽

Vol 60 (6) ◽

pp. 3717-3729 ◽

Cited By ~ 24

Author(s):

Jourdan A. Andersson ◽

Eric C. Fitts ◽

Michelle L. Kirtley ◽

Duraisamy Ponnusamy ◽

Alex G. Peniche ◽

...

Keyword(s):

Therapeutic Potential ◽

Bacterial Pathogens ◽

Bactericidal Effect ◽

Resistant Bacteria ◽

Content Type ◽

Broad Applicability ◽

Approved Drugs ◽

Fda Approved Drugs

Antibiotic resistance in medically relevant bacterial pathogens, coupled with a paucity of novel antimicrobial discoveries, represents a pressing global crisis. Traditional drug discovery is an inefficient and costly process; however, systematic screening of Food and Drug Administration (FDA)-approved therapeutics for other indications in humans offers a rapid alternative approach. In this study, we screened a library of 780 FDA-approved drugs to identify molecules that rendered RAW 264.7 murine macrophages resistant to cytotoxicity induced by the highly virulentYersinia pestisCO92 strain. Of these compounds, we identified 94 not classified as antibiotics as being effective at preventingY. pestis-induced cytotoxicity. A total of 17 prioritized drugs, based on efficacy inin vitroscreens, were chosen for further evaluation in a murine model of pneumonic plague to delineate ifin vitroefficacy could be translatedin vivo. Three drugs, doxapram (DXP), amoxapine (AXPN), and trifluoperazine (TFP), increased animal survivability despite not exhibiting any direct bacteriostatic or bactericidal effect onY. pestisand having no modulating effect on crucialY. pestisvirulence factors. These findings suggested that DXP, AXPN, and TFP may modulate host cell pathways necessary for disease pathogenesis. Finally, to further assess the broad applicability of drugs identified fromin vitroscreens, the therapeutic potential of TFP, the most efficacious drugin vivo, was evaluated in murine models ofSalmonella entericaserovar Typhimurium andClostridium difficileinfections. In both models, TFP treatment resulted in increased survivability of infected animals. Taken together, these results demonstrate the broad applicability and potential use of nonantibiotic FDA-approved drugs to combat respiratory and gastrointestinal bacterial pathogens.

Download Full-text

In Vivo Biocompatibility of Electrospun Biodegradable Dual Carrier (Antibiotic + Growth Factor) in a Mouse Model—Implications for Rapid Wound Healing

Pharmaceutics ◽

10.3390/pharmaceutics11040180 ◽

2019 ◽

Vol 11 (4) ◽

pp. 180 ◽

Cited By ~ 14

Author(s):

Charu Dwivedi ◽

Himanshu Pandey ◽

Avinash C. Pandey ◽

Sandip Patil ◽

Pramod W. Ramteke ◽

...

Keyword(s):

Wound Healing ◽

Growth Factor ◽

Drug Loading ◽

Physicochemical Characterization ◽

Diabetic Wound ◽

Scanning Calorimetry ◽

Rapid Healing ◽

Diabetic Wound Healing

Tissue engineering technologies involving growth factors have produced one of the most advanced generations of diabetic wound healing solutions. Using this approach, a nanocomposite carrier was designed using Poly(d,l-lactide-co-glycolide) (PLGA)/Gelatin polymer solutions for the simultaneous release of recombinant human epidermal growth factor (rhEGF) and gentamicin sulfate at the wound site to hasten the process of diabetic wound healing and inactivation of bacterial growth. The physicochemical characterization of the fabricated scaffolds was carried out using scanning electron microscopy (SEM) and X-ay diffraction (XRD). The scaffolds were analyzed for thermal stability using thermogravimetric analysis and differential scanning calorimetry. The porosity, biodegradability, and swelling behavior of the scaffolds was also evaluated. Encapsulation efficiency, drug loading capacity, and in vitro drug release were also investigated. Further, the bacterial inhibition percentage and detailed in vivo biocompatibility for wound healing efficiency was performed on diabetic C57BL6 mice with dorsal wounds. The scaffolds exhibited excellent wound healing and continuous proliferation of cells for 12 days. These results support the applicability of such systems in rapid healing of diabetic wounds and ulcers.

Download Full-text

Formulation and In-Vitro Characterization of Chitosan-Nanoparticles Loaded with the Iron Chelator Deferoxamine Mesylate (DFO)

Pharmaceutics ◽

10.3390/pharmaceutics12030238 ◽

2020 ◽

Vol 12 (3) ◽

pp. 238 ◽

Cited By ~ 7

Author(s):

Maria Lazaridou ◽

Evi Christodoulou ◽

Maria Nerantzaki ◽

Margaritis Kostoglou ◽

Dimitra Lambropoulou ◽

...

Keyword(s):

Sodium Tripolyphosphate ◽

Drug Loading ◽

Chitosan Nanoparticles ◽

Entrapment Efficiency ◽

Molar Ratio ◽

Release Mechanism ◽

Hydroxyl Groups ◽

Deferoxamine Mesylate ◽

Pharmacologically Active

The objective of this study was to develop chitosan (CS) nanoparticles (NPs) loaded with deferoxamine mesylate (DFO) for slow release of this iron-chelating drug. Drug nanoencapsulation was performed via ionic gelation of chitosan using sodium tripolyphosphate (TPP) as cross-linker. Nanoparticles with a size ranging between 150 and 400 nm were prepared for neat CS/TPP with a 2/1 molar ratio while their yield was directly dependent on the applied stirring rate during the preparation process. DFO at different content (20, 45 and 75 wt %) was encapsulated into these nanoparticles. We found that drug loading correlates with increasing DFO content while the entrapment efficiency has an opposite behavior due to the high solubility of DFO. Hydrogen-bonding between amino and hydroxyl groups of DFO with reactive groups of CS were detected using FT-IR spectroscopy while X-ray diffraction revealed that DFO was entrapped in amorphous form in the CS nanoparticles. DFO release is directly dependent on the content of loaded drug, while model analysis revealed that the release mechanism of DFO for the CS/TPP nanoparticles is by diffusion. Treatment of murine RAW 264.7 macrophages with nanoencapsulated DFO promoted an increased expression of transferrin receptor 1 (TfR1) mRNA, a typical homeostatic response to iron deficiency. These data provide preliminary evidence for release of pharmacologically active DFO from the chitosan nanoparticles.

Download Full-text

An in vitro model for investigation of vitamin A effects on wound healing

International Journal for Vitamin and Nutrition Research ◽

10.1024/0300-9831/a000692 ◽

2021 ◽

pp. 1-6

Author(s):

Hoda Keshmiri Neghab ◽

Mohammad Hasan Soheilifar ◽

Gholamreza Esmaeeli Djavid

Keyword(s):

Wound Healing ◽

Endothelial Cell ◽

Vitamin A ◽

In Vitro Model ◽

Cellular Proliferation ◽

Endothelial Cell Migration ◽

Normal Fibroblast ◽

Anti Inflammatory ◽

Vitro Model

Abstract. Wound healing consists of a series of highly orderly overlapping processes characterized by hemostasis, inflammation, proliferation, and remodeling. Prolongation or interruption in each phase can lead to delayed wound healing or a non-healing chronic wound. Vitamin A is a crucial nutrient that is most beneficial for the health of the skin. The present study was undertaken to determine the effect of vitamin A on regeneration, angiogenesis, and inflammation characteristics in an in vitro model system during wound healing. For this purpose, mouse skin normal fibroblast (L929), human umbilical vein endothelial cell (HUVEC), and monocyte/macrophage-like cell line (RAW 264.7) were considered to evaluate proliferation, angiogenesis, and anti-inﬂammatory responses, respectively. Vitamin A (0.1–5 μM) increased cellular proliferation of L929 and HUVEC (p < 0.05). Similarly, it stimulated angiogenesis by promoting endothelial cell migration up to approximately 4 fold and interestingly tube formation up to 8.5 fold (p < 0.01). Furthermore, vitamin A treatment was shown to decrease the level of nitric oxide production in a dose-dependent effect (p < 0.05), exhibiting the anti-inflammatory property of vitamin A in accelerating wound healing. These results may reveal the therapeutic potential of vitamin A in diabetic wound healing by stimulating regeneration, angiogenesis, and anti-inﬂammation responses.

Download Full-text