scholarly journals Hot Melt Coating of Amorphous Carvedilol

Pharmaceutics ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 519 ◽  
Author(s):  
Jacob Bannow ◽  
Lina Koren ◽  
Sharareh Salar-Behzadi ◽  
Korbinian Löbmann ◽  
Andreas Zimmer ◽  
...  
Keyword(s):  
Drug Release ◽  
Physical Stability ◽  
Spray Coating ◽  
Aqueous Solubility ◽  
Immediate Release ◽  
In Vitro Lipolysis ◽  
Drug Candidates ◽  
Amorphous Drug ◽  
Hot Melt

The use of amorphous drug delivery systems is an attractive approach to improve the bioavailability of low molecular weight drug candidates that suffer from poor aqueous solubility. However, the pharmaceutical performance of many neat amorphous drugs is compromised by their tendency for recrystallization during storage and lumping upon dissolution, which may be improved by the application of coatings on amorphous surfaces. In this study, hot melt coating (HMC) as a solvent-free coating method was utilized to coat amorphous carvedilol (CRV) particles with tripalmitin containing 10% (w/w) and 20% (w/w) of polysorbate 65 (PS65) in a fluid bed coater. Lipid coated amorphous particles were assessed in terms of their physical stability during storage and their drug release during dynamic in vitro lipolysis. The release of CRV during in vitro lipolysis was shown to be mainly dependent on the PS65 concentration in the coating layer, with a PS65 concentration of 20% (w/w) resulting in an immediate release profile. The physical stability of the amorphous CRV core, however, was negatively affected by the lipid coating, resulting in the recrystallization of CRV at the interface between the crystalline lipid layer and the amorphous drug core. Our study demonstrated the feasibility of lipid spray coating of amorphous CRV as a strategy to modify the drug release from amorphous systems but at the same time highlights the importance of surface-mediated processes for the physical stability of the amorphous form.

scholarly journals DEVELOPMENT OF TAMOXIFEN CITRATE PELLETS BY HOT-MELT EXTRUSION FOR IMMEDIATE RELEASE: STUDY OF EFFECT OF VARIABLES

2019 ◽  
pp. 111-124
Author(s):  
VISHAL YADAV ◽  
S. SATHESH KUMAR
Keyword(s):  
Drug Release ◽  
Immediate Release ◽  
Hot Melt Extrusion ◽  
Melt Extrusion ◽  
Peg 6000 ◽  
Tamoxifen Citrate ◽  
Croscarmellose Sodium ◽  
Hot Melt ◽  
Mcf 7

Objective: Objective of the study was to develop tamoxifen citrate immediate release pellets by hot-melt extrusion (HME) and to study the effect of various formulation and process variables. Methods: Pellets were prepared by HME technique. Effect of various parameters such as the concentration of ethylcellulose, PEG 6000, croscarmellose sodium, and spheronization speed were studied by using Central Composite Design. Pellets were evaluated for theoretical yield (%), mean pellet size (mm), sphericity (pellips), friability (%), porosity (%), mechanical crushing force (n), and dissolution efficiency. Optimized formulation was studied for compatibility study using IR, DSC, and XRD, SEM, In vitro drug release. In vitro Cell Cytotoxicity and Viability Assay were carried out using MCF-7 (human breast cancer cells) by MTT assay. Results: Results showed that a variable such as the amount of Methyl Cellulose, PEG 6000 and Spheronization speed showed positive correlation and amount of Croscarmellose sodium showed a negative correlation with dependent variables. Optimized formulation showed Korsmeyer Peppas model as a mechanism of drug release. Value of n was found to be in between 0.77+0.04, which reveals that, release mechanism of the drug as non-Fickian transport (0.45<n<0.89). MTT results of MCF-7 cells showed that optimized immediate release pellets have maximum cytotoxicity at 80 µg/ml. Conclusion: Study concluded that HME method and materials i.e. PEG 6000 and methylcellulose can effectively use to get immediate release of tamoxifen citrate so as to increase dissolution rate and cytotoxic effect.

scholarly journals Development and In Vitro-In Vivo Evaluation of a Novel Sustained-Release Loxoprofen Pellet with Double Coating Layer

Pharmaceutics ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 260 ◽  
Author(s):  
Dongwei Wan ◽  
Min Zhao ◽  
Jingjing Zhang ◽  
Libiao Luan
Keyword(s):  
Citric Acid ◽  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Diffusion Rate ◽  
Immediate Release ◽  
Pharmacokinetic Studies ◽  
Release Tablet

This study aimed to develop a novel sustained release pellet of loxoprofen sodium (LXP) by coating a dissolution-rate controlling sub-layer containing hydroxypropyl methyl cellulose (HPMC) and citric acid, and a second diffusion-rate controlling layer containing aqueous dispersion of ethyl cellulose (ADEC) on the surface of a LXP conventional pellet, and to compare its performance in vivo with an immediate release tablet (Loxinon®). A three-level, three-factor Box-Behnken design and the response surface model (RSM) were used to investigate and optimize the effects of the citric acid content in the sub-layer, the sub-layer coating level, and the outer ADEC coating level on the in vitro release profiles of LXP sustained release pellets. The pharmacokinetic studies of the optimal sustained release pellets were performed in fasted beagle dogs using an immediate release tablet as a reference. The results illustrated that both the citric acid (CA) and ADEC as the dissolution- and diffusion-rate controlling materials significantly decreased the drug release rate. The optimal formulation showed a pH-independent drug release in media at pH above 4.5 and a slightly slow release in acid medium. The pharmacokinetic studies revealed that a more stable and prolonged plasma drug concentration profile of the optimal pellets was achieved, with a relative bioavaibility of 87.16% compared with the conventional tablets. This article provided a novel concept of two-step control of the release rate of LXP, which showed a sustained release both in vitro and in vivo.

scholarly journals Optimizing the Role of Polymer Blend in the Preparation of Acyclovir Controlled-Release Tablets: An Approach for Better Patient Compliance

2018 ◽  
Author(s):  
Barkat Khan ◽  
Faheem Haider ◽  
Kifayat Shah ◽  
Bushra Uzair ◽  
Kaijian Hou ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Kinetics ◽  
Immediate Release ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solubility Study ◽  
Release Data

This study was carried out to formulate and evaluate controlled release (CR) matrix tablets of Acyclovir using combination of hydrophilic and hydrophobic polymers. Acyclovir is a guanine derivative and is its half-life is short hence administered five times a day using immediate release tablets. Six formulations (F1-F6) were developed using Ethocel and Carbopol in equal combinations at drug-polymer (D:P) ratio of 10:5, 10:6, 10:7, 10:8, 10:9 and 10:10. Solubility study was performed using six different solvents. The compatibility studies were carried out using FTIR and DSC. According to USP, Quality Control and dimensional tests (hardness, friability, disintegration and thickness) were executed. In-vitro drug release studies of Acyclovir was carried out in dissolution apparatus using using 0.1 N HCl medium at constant temperature of 37 ± 0.5 ºC. In order to analyze the drug release kinetics, five different mathematical models were applied to the release data. The results showed that there was no incompatibility between drug and polymers. Physical QC tests were found within limits of USP. The release was retarded upto 24 hrs and non-fickian in-vitro drug release mechanism was found. A formulation developed using blend of polymers, showed excellent retention and desired release profiles thus providing absolute control for 24 hrs.

scholarly journals Enrichment of aqueous solubility and dissolution profile of mesalamine: In vitro evaluation of solid dispersion

2021 ◽  
Vol 9 (2) ◽  
pp. 127-135
Author(s):  
Anil Raosaheb Pawar ◽  
Pralhad Vitthalrao Mundhe ◽  
Vinayak Kashinath Deshmukh ◽  
Ramdas Bhanudas Pandhare ◽  
Tanaji Dilip Nandgude
Keyword(s):  
Ulcerative Colitis ◽  
Drug Release ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Peg 4000

The aim of the present study was to formulate solid dispersion (SD) of Mesalamine to enrich the aqueous solubility and dissolution rate. Mesalamine is used in the management of acute ulcerative colitis and for the prevention of relapse of active ulcerative colitis. In the present study, Solid dispersion of Mesalamine was prepared by Fusion and Solvent evaporation method with different polymers. SD’s were characterized by % practical yield, drug content, Solubility, FT-IR, PXRD (Powder X- ray diffractometry), SEM (Scanning electron microscopy), in vitro dissolution studies and Stability studies. The percent drug release of prepared solid dispersion of Mesalamine by fusion and solid dispersion method (FM47, FM67, SE47 and SE67) in 1:7 ratio was found 81.36±0.41, 86.29±0.64, 82.45±0.57and 87.25±1.14 respectively. The aqueous solubility and percent drug release of solid dispersion of Mesalamine by both methods was significantly increased. The PXRD demonstrated that there was a significant decrease in crystallinity of pure drug present in the solid dispersions, which resulted in an increased aqueous solubility and dissolution rate of Mesalamine.The significant increase in aqueous solubility and dissolution rate of Mesalamine was observed in solid dispersion as the crystallinity of the drug decreased, absence of aggregation and agglomeration, increased wetability and good dispersibility after addition of PEG 4000 and PEG 6000.

In-Vitro Functionality of Clozapine Biphasic Release Minitablet Using Advanced Statistical Tools

2021 ◽  
Vol 11 ◽  
Author(s):  
Hardik Rana ◽  
Rushikesh Chaudhari ◽  
Vaishali Thakkar ◽  
Tejal Gandhi
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Ethyl Cellulose ◽  
Dosage Form ◽  
Immediate Release ◽  
Solid Dosage Form ◽  
Solid Dosage ◽  
Precipitation Inhibitor

Background: The better control of the drug release with immediate effect is the major concern to achieve better therapeutic action and patient compliance. The failure of the solid dispersion complex during storage as well as in-vivo is another concern for the oral solid dosage form. Objective: The prime objective of the present study was to optimize the biphasic minitablet incorporating quality by design approach using the combination of waxy erodible and water-impermeable excipients. Exploration of Soluplus as a precipitation inhibitor and Dexolve as a solubility enhancer in oral solid dosage form was the secondary objective. Methods: The drug-Excipient compatibility study was assessed by FTIR. Clozapine was chosen as a model drug that has poor aqueous solubility. The complex was formulated using B-cyclodextrin or HP B-CD or Dexolve by kneading method. The screening of solubility enhancers and their amount were performed based on phase solubility study. The precipitation inhibitor was screened as per the parachute effect study. Immediate release minitablets were formulated using a direct compression method using different disintegrating agents. The IR minitablets were evaluated for different evaluation parameters. The sustained release minitablets was formulated by hot-melt granulation technique incorporating the Precirol ATO 5 as a waxy excipient and ethyl cellulose as water impermeable excipient. The SR minitablet was optimized using a central composite design. The amount of Precirol ATO 5 and ethyl cellulose were chosen as independent variables and % drug release at 1, 6, and 10 h was selected as responses. The designed batches were evaluated for different pre and post compressional parameters. The IR and SR minitablets were filled in a capsule as per dose requirement and evaluated for in-vitro drug release. The in-vivo plasma concentration was predicted using the Back calculation of the Wagner – Nelson approach. Results: Drug – Excipient study revealed that no significant interaction was observed. Dexolve was screened as a solubility enhancer for the improvement of the solubility of clozapine. The Soluplus was chosen as a precipitation inhibitor from the parachute effect study. The immediate-release tablet was formulated using Prosolv EASYtab SP yield less disintegration time with better flowability. The sustained release mini-tablet was formulated using Precirol ATO 5 and ethyl cellulose. Two-dimensional and three-dimensional plots were revealed the significant effect of the amount of Precirol ATO 5 and ethyl cellulose. The overlay plot locates the optimized region. The in-vitro drug release study revealed the desired drug release of the final combined formulation. The in-vivo plasma concentration-time confirms the drug release up to 12h. Conclusion: The biphasic mini-tablets were formulated successfully for better control of drug release leads to high patient compliance. The use of soluplus as a precipitation inhibitor is explored in the oral solid dosage form for a poorly aqueous drug. Prosolv EASYtab SP was incorporated in the formulation as super disintegrant. The amount of Precirol ATO 5 and ethyl cellulose had a significant effect on drug release in sustained-release minitablet. The approach can be useful in the industry.

scholarly journals Solubility, Permeability, and Dissolution Rate of Naftidrofuryl Oxalate Based on BCS Criteria

Pharmaceutics ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 1238
Author(s):  
Marta Kus-Slowinska ◽  
Monika Wrzaskowska ◽  
Izabela Ibragimow ◽  
Piotr Igor Czaklosz ◽  
Anna Olejnik ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Chemical Properties ◽  
Aqueous Solubility ◽  
Immediate Release ◽  
Drug Substances ◽  
High Dissolution Rate ◽  
Cerebral Diseases ◽  
Preliminary Classification

The Biopharmaceutics Classification System (BCS) was conceived to classify drug substances by their in vitro aqueous solubility and permeability properties. The essential activity of naftidrofuryl oxalate (NF) has been described as the inhibition of the serotonin receptors (5-HT2), resulting in vasodilation and decreasing blood pressure. Since the early 1980s, NF has been used to treat several venous and cerebral diseases. There is no data available on the BCS classification of NF. However, based on its physical-chemical properties, NF might be considered to belong to the 1st or the 3rd BCS class. The present study aimed to provide data concerning the solubility and permeability of NF through Caco-2 monolayers and propose its preliminary classification into BCS. We showed that NF is a highly soluble and permeable drug substance; thus, it might be suggested to belong to BCS class I. Additionally, a high dissolution rate of the encapsulated NF based on Praxilene® 100 mg formulation was revealed. Hence, it might be considered as an immediate-release (IR).

scholarly journals Crushed Tablets: Does the Administration of Food Vehicles and Thickened Fluids to Aid Medication Swallowing Alter Drug Release?

2014 ◽  
Vol 17 (2) ◽  
pp. 207 ◽  
Author(s):  
Yady Juliana Manrique-Torres ◽  
Danielle J Lee ◽  
Faiza Islam ◽  
Lisa M Nissen ◽  
Julie A.Y. Cichero ◽  
...  
Keyword(s):  
Drug Release ◽  
Orange Juice ◽  
Immediate Release ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Simulated Gastric Fluid ◽  
Drug Bioavailability ◽  
Thickening Agents

Purpose. To evaluate the influence of co-administered vehicles on in vitro dissolution in simulated gastric fluid of crushed immediate release tablets as an indicator for potential drug bioavailability compromise. Methods. Release and dissolution of crushed amlodipine, atenolol, carbamazepine and warfarin tablets were tested with six foods and drinks that are frequently used in the clinical setting as mixers for crushed medications (water, orange juice, honey, yoghurt, strawberry jam and water thickened with Easythick powder) in comparison to whole tablets. Five commercial thickening agents (Easythick Advanced, Janbak F, Karicare, Nutilis, Viscaid) at three thickness levels were tested for their effect on the dissolution of crushed atenolol tablets. Results. Atenolol dissolution was unaffected by mixing crushed tablets with thin fluids or food mixers in comparison to whole tablets or crushed tablets in water, but amlodipine was delayed by mixing with jam. Mixing crushed warfarin and carbamazepine tablets with honey, jam or yoghurt caused them to resemble the slow dissolution of whole tablets rather than the faster dissolution of crushed tablets in water or orange juice. Crushing and mixing any of the four medications with thickened water caused a significant delay in dissolution. When tested with atenolol, all types of thickening agents at the greatest thickness significantly restricted dissolution, and products that are primarily based on xanthan gum also delayed dissolution at the intermediate thickness level. Conclusions. Dissolution testing, while simplistic, is a widely used and accepted method for comparing drug release from different formulations as an indicator for in vivo bioavailability. Thickened fluids have the potential to retard drug dissolution when used at the thickest levels. These findings highlight potential clinical implications of the addition of these agents to medications for the purpose of dose delivery and indicate that further investigation of thickened fluids and their potential to influence therapeutic outcomes is warranted. This article is open to POST-PUBLICATION REVIEW. Registered readers (see “For Readers”) may comment by clicking on ABSTRACT on the issue’s contents page.

In vitro and in vivo behavior of ground tadalafil hot-melt extrudates: How the carrier material can effectively assure rapid or controlled drug release

2017 ◽  
Vol 528 (1-2) ◽  
pp. 498-510 ◽  
Author(s):  
Anna Krupa ◽  
Oriane Cantin ◽  
Beata Strach ◽  
Elżbieta Wyska ◽  
Zbisław Tabor ◽  
...  
Keyword(s):  
Drug Release ◽  
Controlled Drug Release ◽  
Carrier Material ◽  
Hot Melt

A COMPARATIVE ASSESSMENT OF VESICULAR FORMULATIONS: TRANSFERSOMES AND CONVENTIONAL LIPOSOMES LOADED IVABRADINE HYDROCHLORIDE

2020 ◽  
pp. 51-55
Author(s):  
GITA CHAURASIA ◽  
NARENDRA LARIYA
Keyword(s):  
Drug Release ◽  
Physical Stability ◽  
Physical Appearance ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Molar Ratio ◽  
Drug Release Study ◽  
Release Study

Objective: Ivabradine hydrochloride (IH), a benzazepine derivative used to treat cardiovascular disease angina pectoris. In this study IH-loaded novel carrier systems transfersomes (TFs) and conventional liposomes (CLs) were developed and compared for their efficacy to enhance the stability of drugs from degradation. Methods: TFs formulations (TF-1, TF-2 and TF-3) were prepared by using different biocompatible surfactants; tween-80 (TW), span-80(S) and sodium deoxycholate (SC) in the concentration ratio of 15 parts with 85 parts of soy phosphatidylcholine as phospholipid by thin-film hydration method. These vesicles were compared with CLs formulation (L-1) prepared in 7:3 molar ratio of soy phosphatidylcholine: cholesterol by following the same method. These vesicles were compared for physical appearance, vesicle shape, and size, percentage drug entrapment efficiency (%DEE), deformability index (DI), in vitro percentage cumulative drug release study, and physical stability studies. The chosen optimized novel carriers were observed under scanning electron microscopy. Results: The compared data demonstrated that the physical appearance for all vesicles was turbid and had a spherical shape. The size distribution was in the range of 129.0 nm to 273.5 nm in vesicles. The %DEE (79.0±0.94) and DI (35.0±1.9) was found maximum in TF-1 formulation that was 2.3 times higher than L-1 formulation. The in vitro percentage cumulative drug release study followed second-order polynomial kinetics that was 2.0 times higher than L-1and 2.9 times higher than the plain drug in 30 min (90.4±0.06%) from TF-1. The vesicles were found to be stable at refrigeration conditions. Conclusion: Thus, amongst of all vesicles TW loaded TFs (TF-1) was chosen as an excellent novel vesicular carrier for hydrophilic drugs due to its higher deformability behavior than CLs that protects the certain drugs from biodegradation and provides stability.

Central composite designed ezetimibe solid dispersion for dissolution enhancement: synthesis and in vitro evaluation

2019 ◽  
Vol 10 (10) ◽  
pp. 643-658 ◽  
Author(s):  
Neelam Sharma ◽  
Sukhbir Singh
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
Solvent Evaporation ◽  
Dissolution Enhancement ◽  
Great Promise ◽  
Bcs Class Ii ◽  
Evaporation Technique ◽  
Central Composite

Aim: The current research is focused on increasing aqueous solubility and dissolution of BCS class II drug by using modified solvent evaporation technique to produce solid dispersions of ezetimibe (EZSD) using gelucire 50/13 and polyvinyl pyrollidone K30. Methodology & results: Central composite design analyzed the effect of gelucire 50/13 and polyvinyl pyrollidone K30 on the percentage of drug released in 5 and 30 min. Ezetimibe (EZ) aqueous saturation solubility (4.56 ± 0.94 μg/ml) was increased 25-fold in EZSD (115 ± 3.41 μg/ml). Cumulative drug release from EZ and optimized EZSD were observed 24.67 and 87.54% within 1 h, respectively. Conclusion: Manufacturing EZSD using modified solvent evaporation technique using rotary evaporator holds great promise for enhancing EZ's solubility and dissolution.

Sign in / Sign up

Export Citation Format

Share Document