Effects of Starch Incorporation on the Physicochemical Properties and Release Kinetics of Alginate-Based 3D Hydrogel Patches for Topical Delivery

The development of printable hydrogel inks for extrusion-based 3D printing is opening new possibilities to the production of new and/or improved pharmaceutical forms, specifically for topical application. Alginate and starch are natural polysaccharides that have been extensively exploited due to their biocompatibility, biodegradability, viscosity properties, low toxicity, and relatively low cost. This research work aimed to study the physicochemical and release kinetic effects of starch incorporation in alginate-based 3D hydrogel patches for topical delivery using a quality by design approach. The incorporation of a pregelatinized starch is also proposed as a way to improve the properties of the drug delivery system while maintaining the desired quality characteristics. Critical material attributes and process parameters were identified, and the sensitivity and adequacy of each parameter were statistically analyzed. The impact of alginate, starch, and CaCl2·2H2O amounts on relevant quality attributes was estimated crosswise. The amount of starch revealed a synergetic impact on porosity (p = 0.0021). An evident increase in the size and quantity of open pores were detected in the as printed patches as well as after crosslinking (15.6 ± 5.2 µm). In vitro drug release studies from the optimized alginate-starch 3D hydrogel patch, using the probe Rhodamine B, showed an initial high burst release, followed by a controlled release mechanism. The results obtained also showed that the viscoelastic properties, printing accuracy, gelation time, microstructure, and release rates can be modulated by varying the amount of starch added to the system. Furthermore, these results can be considered an excellent baseline for future drug release modulation strategies.

Download Full-text

Amphiphilic Block Copolymer Microspheres Derived from Castor Oil, Poly(ε-carpolactone), and Poly(ethylene glycol): Preparation, Characterization and Application in Naltrexone Drug Delivery

Materials ◽

10.3390/ma11101996 ◽

2018 ◽

Vol 11 (10) ◽

pp. 1996 ◽

Cited By ~ 6

Author(s):

Maria Nerantzaki ◽

Eirini Skoufa ◽

Kyriakos-Vasileios Adam ◽

Stavroula Nanaki ◽

Apostolos Avgeropoulos ◽

...

Keyword(s):

Drug Release ◽

Ethylene Glycol ◽

Castor Oil ◽

In Vitro Dissolution ◽

Release Mechanism ◽

Release Kinetic ◽

Burst Release ◽

Poly Ethylene Glycol ◽

Long Term Treatment ◽

Poly Ethylene

In the present study, the newly synthesized castor oil-derived thioether-containing ω-hydroxyacid (TEHA) block copolymers with polycaprolactone (TEHA-b-PCL), with methoxypoly(ethylene glycol) (mPEG), (TEHA-b-mPEG) and with poly(ethylene glycol) (PEG) (TEHA-b-PEG-b-TEHA), were investigated as polymeric carriers for fabrication of naltrexone (NLX)-loaded microspheres by the single emulsion solvent evaporation technique. These microspheres are appropriate for the long-term treatment of opioid/alcohol dependence. Physical properties of the obtained microspheres were characterized in terms of size, morphology, drug loading capacity, and drug release. A scanning electron microscopy study revealed that the desired NLX-loaded uniform microspheres with a mean particle size of 5–10 µm were obtained in all cases. The maximum percentage encapsulation efficiency was found to be about 25.9% for the microspheres obtained from the TEHA-b-PEG-b-TEHA copolymer. Differential scanning calorimetry and X-ray diffractometry analysis confirmed the drug entrapment within microspheres in the amorphous state. In vitro dissolution studies revealed that all NLX-loaded formulations had a similar drug release profile: An initial burst release after 24 h, followed by a sustained and slower drug release for up to 50 days. The analysis of the release kinetic data, which were fitted into the Korsmeyer–Peppas release model, indicated that diffusion is the main release mechanism of NLX from TEHA-b-PCL and TEHA-b-mPEG microspheres, while microspheres obtained from TEHA-b-PEG-b-TEHA exhibited a drug release closer to an erosion process.

Download Full-text

Design and evaluation of lornoxicam bilayered tablets for biphasic release

Brazilian Journal of Pharmaceutical Sciences ◽

10.1590/s1984-82502012000400004 ◽

2012 ◽

Vol 48 (4) ◽

pp. 609-619

Author(s):

Songa Ambedkar Sunil ◽

Meka Venkata Srikanth ◽

Nali Sreenivasa Rao ◽

Sakamuri Balaji ◽

Kolapalli Venkata Ramana Murthy

Keyword(s):

Controlled Release ◽

Drug Release ◽

Xanthan Gum ◽

Hydroxypropyl Methylcellulose ◽

Fickian Diffusion ◽

Release Mechanism ◽

Release Kinetic ◽

Burst Release ◽

Significant Difference ◽

Biphasic Release

The objective of the present investigation was to develop bilayered tablets of lornoxicam to achieve biphasic release pattern. A bilayered tablet, consisting of an immediate and controlled release layer, was prepared by direct compression technique. The controlled release effect was achieved by using various hydrophilic natural, semi synthetic and synthetic controlled release polymers such as xanthan gum, hydroxypropyl methylcellulose (HPMC) and polyethylene oxide (PEO) to modulate the release of the drug. The in vitro drug release profiles showed the biphasic release behavior in which the immediate release (IR) layer containing the lornoxicam was released within 15 minutes, whereas the controlled release (CR) layer controlled the drug release for up to 24 h. All the bilayered tablets formulated have followed the zero order release with non-Fickian diffusion controlled release mechanism after the initial burst release. FTIR studies revealed that there was no interaction between the drug and polymers used in the study. Statistical analysis (ANOVA) showed no significant difference in the cumulative amount of drug release after 15 min, but significant difference (p < 0.05) in the amount of drug released after 24 h from optimized formulations was observed. Based on the release kinetic parameters obtained, it can be concluded that xanthan gum polymer was suitable for providing a biphasic release of lornoxicam.

Download Full-text

Design and Synthesis of a Novel Gabapentin-Phosphotidylcholine Conjugate for Targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier

Current Computer - Aided Drug Design ◽

10.2174/1573409916666201224153414 ◽

2020 ◽

Vol 16 ◽

Author(s):

Anjali P.B ◽

Jawahar N. ◽

Jubie S. ◽

Neetu Yadav ◽

Selvaraj A. ◽

...

Keyword(s):

Drug Release ◽

Phospholipase A2 ◽

Release Kinetics ◽

Entrapment Efficiency ◽

Structural Analog ◽

Fickian Diffusion ◽

Release Kinetic ◽

Nanostructured Lipid Carrier ◽

Discovery Studio

Background: : Epilepsy is a genuine neurological turmoil that effects around 50 million individuals around the world. Practically 30% of epileptic patients experience the ill effects of pharmaco-obstruction, which is related with social seclusion, subordinate conduct, low marriage rates, joblessness, mental issues and diminished personal satisfaction. At present accessible antiepileptic drugs have a restricted viability, and their negative properties limit their utilization and cause challenges in patient administration. Gabapentin 1-(aminomethyl)cyclohexane acetic acid, Gbp , (trade name Neurontin), a structural analog of γ-aminobutyric acid (GABA), BCS class 3 drug with having permeability issues. Objective: This work was an attempt to formulate and characterize a new approach to treat epilepsy by targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier. Methods: Docking studied carried out using Accelrys Discovery studio 4.1 Client and gabapentin and phosphotidylcholine were conjugated through chemical conjugation. Nanostructured lipid carrier (NLC) was prepared using hot homogenization technique. Results: The libdock score of Gabapentin- Phosphotidylcholine conjugate (192.535) were found to be more than Gabapentin (77.1084) and Phosphotidylcholine (150.212). For the optimized formulation the particle size (50.08), zeta potential (-1.48), PDI (0.472) and entrapment efficiency (77.8) was observed. The NLC was studies for in-vitro drug release studies and release kinetics. Finally found that the drug release from the NLC followed Higuchi release kinetic and the mode of drug release from the NLC was found to be Non- Fickian diffusion. Conclusion: The formulated Nanostructured lipid carrier of Gabapentin-Phosphotidylcholine conjugate may be able to use to prevent seizure.

Download Full-text

Development of Controlled-Release Carbamide Peroxide Loaded Nanoemulgel for Tooth Bleaching: In Vitro and Ex Vivo Studies

Pharmaceuticals ◽

10.3390/ph14020132 ◽

2021 ◽

Vol 14 (2) ◽

pp. 132

Author(s):

Siriporn Okonogi ◽

Adchareeya Kaewpinta ◽

Sakornrat Khongkhunthian ◽

Pisaisit Chaijareenont

Keyword(s):

Drug Release ◽

Solid Dispersion ◽

Solid Dispersions ◽

Tooth Bleaching ◽

Polymer Mixture ◽

Release Mechanism ◽

Burst Release ◽

Order Kinetic ◽

Carbamide Peroxide ◽

Periodontal Tissues

Burst release of carbamide peroxide (CP) from traditional hydrogels causes severe inflammation to periodontal tissues. The present study explores the development of a novel CP nanoemulgel (CP-NG), an oil-in-water nanoemulsion-based gel in which CP was loaded with a view to controlling CP release. CP solid dispersions were prepared, using white soft paraffin or polyvinylpyrrolidone-white soft paraffin mixture as a carrier, prior to formulating nanoemulsions. It was found that carrier type and the ratio of CP to carrier affected drug crystallinity. Nanoemulsions formulated from the optimized CP solid dispersions were used to prepare CP-NG. It was found that the ratio of drug to carrier in CP solid dispersions affected the particle size and zeta potential of the nanoemulsions as well as drug release behavior and tooth bleaching efficacy of CP-NG. Drug release from CP-NG followed a first-order kinetic reaction and the release mechanism was an anomalous transport. Drug release rate decreased with an increase in solid dispersion carriers. CP-NG obtained from the solid dispersion with a 1:1 ratio of CP to the polymer mixture is suitable for sustaining drug release with high tooth bleaching efficacy and without reduction of enamel microhardness. The developed CP-NG is a promising potential tooth bleaching formulation.

Download Full-text

Formulation and investigation of crushed puffed rice-chitosan-HPMC based polymeric blends as carrier for sustained stomach specific drug delivery of piroxicam using 3(2) Taguchi mathematical design studies

International Current Pharmaceutical Journal ◽

10.3329/icpj.v6i11.36435 ◽

2018 ◽

Vol 6 (11) ◽

pp. 61-80 ◽

Cited By ~ 1

Author(s):

Shashank Soni ◽

Veerma Ram ◽

Anurag Verma

Keyword(s):

Drug Release ◽

Release Kinetics ◽

Drug Loading ◽

Hydroxypropyl Methylcellulose ◽

Research Work ◽

Pharmaceutical Journal ◽

Weight Variation ◽

Zero Order Release ◽

Puffed Rice

In the present experimental investigation an attempt has been made to assess the utility of Crushed Puffed Rice (CPR)-High Molecular Weight Chitosan (HMWCH)-Hydroxypropyl Methylcellulose K15M (HPMC K15M) as a polymeric carrier for the sustained stomach delivery of Piroxicam (PRX). A total of nine formulations were prepared by using 3 (2) Taguchi factorial design, physically blending drug and polymer(s) followed by encapsulation into hard gelatin capsules size 1. The prepared capsules were evaluated for various performance such as weight variation, drug contents, in vitro buoyancy and drug release in 0.1 M HCl. The effect of drug loading on in vitro performance of the formulations was also determined. Crushed puffed rice (CPR) remained buoyant for up to average time span of 06 hr as an unwetted irregular mass in 0.1 M HCl. However, when combined with HMWCH or HPMC K15M or HPMC K15M + HMWCH a low -density cylindrical raft type hydrogel was formed which remained buoyant for up to 12 hr and released up to 99% drug in a sustained manner from 8 to 12 hr following zero order release kinetics. It was also observed that drug release from drug + CPR matrices followed Fickian mechanism. Combination of CPR + HMWCH or HMWCH + HPMC K15M also follows Fickian mechanism. Obtained data from the research work suggests that CPR in combination with HMWCH or HPMC K15M or HPMC has sufficient potential to be used as a carrier for stomach specific delivery of gastric irritant drug like PRX.Soni et al., International Current Pharmaceutical Journal, April 2018, 6(11): 61-80http://www.icpjonline.com/documents/Vol6Issue11/01.pdf

Download Full-text

Effect of Hydroxyapatite Nanoparticles on Ibuprofen Release from Carboxymethyl-Hexanoyl Chitosan/O-Hexanoyl Chitosan Hydrogel

Journal of Nanoscience and Nanotechnology ◽

10.1166/jnn.2006.458 ◽

2006 ◽

Vol 6 (9) ◽

pp. 2929-2935 ◽

Cited By ~ 6

Author(s):

Tse-Ying Liu ◽

Ting-Yu Liu ◽

San-Yuan Chen ◽

Shian-Chuan Chen ◽

Dean-Mo Liu

Keyword(s):

Drug Release ◽

Release Kinetics ◽

Burst Release ◽

Release Behavior ◽

Chitosan Hydrogel ◽

Sequential Release ◽

Water Accessibility ◽

Hydrophilic Nature ◽

Hexanoyl Chitosan ◽

Kinetics Of

In order to explore the effect of nanofiller on the regulation of the drug release behavior from microsphere-embedded hydrogel prepared by carboxymethyl-hexanoyl chitosan (HNOCC) and O-hexanoyl chitosan (OHC), the release kinetics was investigated in terms of various amounts of calcium-deficient hydroxyapatite (CDHA) nanoparticles incorporated. HNOCC is a novel chitosan-based hydrophilic matrix with a burst release profile in a highly swollen state. The drug release kinetics of the HNOCC hydrogel can be regulated by incorporation of well-dispersed CDHA nanoparticles. It was found that the release duration of ibuprofen (IBU) from HNOCC was prolonged with increasing amounts of CDHA which acts as a crosslink agent and diffusion barrier. On the contrary, the release duration of the IBU from OHC (hydrophobic phase) was shortened through increasing the CDHA amount over 5%, which is due to the hydrophilic nature of the CDHA nanoparticles destroying the intermolecular hydrophobic interaction and accelerating OHC degradation. Thus, water accessibility and molecular relaxation were enhanced, resulting in a higher release rate. In addition, sustained and sequential release behavior was achieved by embedding the OHC microspheres (hydrophobic phase) into the HNOCC (hydrophilic phase) matrix, which could significantly prolong the release duration of the HNOCC drug-loaded implant.

Download Full-text

Preparation and Characterization of Mucoadhesive Microcapsules of Gliclazide with Natural Gums

Stamford Journal of Pharmaceutical Sciences ◽

10.3329/sjps.v4i1.8865 ◽

1970 ◽

Vol 4 (1) ◽

pp. 38-48 ◽

Cited By ~ 4

Author(s):

Santhosh Kumar Mankala ◽

Nishanth Kumar Nagamalli ◽

Ramakrishna Raprla ◽

Rajyalaxmi Kommula

Keyword(s):

Drug Release ◽

Dosage Form ◽

Guar Gum ◽

Release Kinetics ◽

Insulin Dependent Diabetes Mellitus ◽

Dependent Diabetes Mellitus ◽

Release Mechanism ◽

Ionic Gelation ◽

Release Formulation

Gliclazide is an oral hypoglycemic agent used in management of non-insulin dependent diabetes mellitus. Among people who are suffering from long term disorders, the major were categorized under diabetes so, a dosage form is needed to provide continuous therapy with high margin of safety & such dosage form can be achieved by microencapsulation. Gliclazide microspheres with sodium alginate (coat material, gum kondagogu, gum guar and xanthan gum (mucoadhesive agents) were prepared by orifice-ionic gelation and emulsification ionic gelation techniques varying concentrations (1:0.25, 1:0.5, 1:0.75 and 1:1). Formulations were then evaluated for surface morphology, particle shape, Carr’s index, microencapsulation efficiency, drug release, mucoadhesion studies. Compatibility studies were performed by FTIR, DSC, and XRD techniques and no interactions were found between drug and excepients used. The microspheres were found spherical and free flowing with emulsion ionic gelation technique with a size range 400-600μm. % drug content and encapsulation efficiency found in the range of 55%-68% and, 86.23%-94.46% respectively. All microspheres showed good mucoadhesive property in in-vitro wash of test. In vitro drug release studies showed that the guar gum has more potentiality to retard the drug release compared to other gums and concentrations. Drug release from the microspheres was found slow following zero order release kinetics with non-fickian release mechanism stating release depended on the coat: core ratio and the method employed. The concentration of 1:1 of SA: GG (EMG 4) found suitable for preparing the controlled release formulation of gliclazide stating emulsification gelation technique is the best among followed. Key words: Gliclazide; Natural gums; orifice ionic gelation technique; emulsification ionic gelation technique DOI: http://dx.doi.org/10.3329/sjps.v4i1.8865 SJPS 2011; 4(1): 38-48

Download Full-text

Optimizing the Role of Polymer Blend in the Preparation of Acyclovir Controlled-Release Tablets: An Approach for Better Patient Compliance

10.20944/preprints201807.0165.v1 ◽

2018 ◽

Author(s):

Barkat Khan ◽

Faheem Haider ◽

Kifayat Shah ◽

Bushra Uzair ◽

Kaijian Hou ◽

...

Keyword(s):

Controlled Release ◽

Drug Release ◽

Release Kinetics ◽

Immediate Release ◽

Matrix Tablets ◽

Release Mechanism ◽

In Vitro Drug Release ◽

Solubility Study ◽

Release Data

This study was carried out to formulate and evaluate controlled release (CR) matrix tablets of Acyclovir using combination of hydrophilic and hydrophobic polymers. Acyclovir is a guanine derivative and is its half-life is short hence administered five times a day using immediate release tablets. Six formulations (F1-F6) were developed using Ethocel and Carbopol in equal combinations at drug-polymer (D:P) ratio of 10:5, 10:6, 10:7, 10:8, 10:9 and 10:10. Solubility study was performed using six different solvents. The compatibility studies were carried out using FTIR and DSC. According to USP, Quality Control and dimensional tests (hardness, friability, disintegration and thickness) were executed. In-vitro drug release studies of Acyclovir was carried out in dissolution apparatus using using 0.1 N HCl medium at constant temperature of 37 ± 0.5 ºC. In order to analyze the drug release kinetics, five different mathematical models were applied to the release data. The results showed that there was no incompatibility between drug and polymers. Physical QC tests were found within limits of USP. The release was retarded upto 24 hrs and non-fickian in-vitro drug release mechanism was found. A formulation developed using blend of polymers, showed excellent retention and desired release profiles thus providing absolute control for 24 hrs.

Download Full-text

DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

Journal of Biomedical and Pharmaceutical Research ◽

10.32553/jbpr.v7i6.559 ◽

2018 ◽

Vol 7 (6) ◽

Author(s):

Mohini Sihare ◽

Rajendra Chouksey

Keyword(s):

Drug Release ◽

Release Kinetics ◽

In Vitro Release ◽

Release Profile ◽

Matrix Tablets ◽

In Vivo Studies ◽

Release Mechanism ◽

In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

Download Full-text

FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

Journal of Drug Delivery and Therapeutics ◽

10.22270/jddt.v8i5.1943 ◽

2018 ◽

Vol 8 (5) ◽

pp. 465-474

Author(s):

S PADMA PRIYA ◽

AN Rajalakshmi ◽

P Ilaveni

Keyword(s):

Drug Release ◽

Sustained Release ◽

Sodium Alginate ◽

Release Kinetics ◽

Drug Loading ◽

Research Work ◽

Entrapment Efficiency ◽

Polyvinyl Pyrrolidone ◽

Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods: Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine formulations were formulated and evaluated for possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

Download Full-text