scholarly journals Preparation and Evaluation of Intraperitoneal Long-Acting Oxaliplatin-Loaded Multi-Vesicular Liposomal Depot for Colorectal Cancer Treatment

Pharmaceutics ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 736
Author(s):  
Sharif Md Abuzar ◽  
Eun Jung Park ◽  
Yeji Seo ◽  
Juseung Lee ◽  
Seung Hyuk Baik ◽  
...  
Keyword(s):  
Colorectal Cancer ◽  
Drug Release ◽  
Entrapment Efficiency ◽  
Lag Phase ◽  
Burst Release ◽  
Sustained Drug Release ◽  
Long Acting ◽  
High Entrapment Efficiency

Colorectal cancer with peritoneal metastasis has a poor prognosis because of inadequate responses to systemic chemotherapy. Cytoreductive surgery followed by intraperitoneal (IP) chemotherapy using oxaliplatin has attracted attention; however, the short half-life of oxaliplatin and its rapid clearance from the peritoneal cavity limit its clinical application. Here, a multivesicular liposomal (MVL) depot of oxaliplatin was prepared for IP administration, with an expected prolonged effect. After optimization, a combination of phospholipids, cholesterol, and triolein was used based on its ability to produce MVL depots of monomodal size distribution (1–20 µm; span 1.99) with high entrapment efficiency (EE) (92.16% ± 2.17%). An initial burst release followed by a long lag phase of drug release was observed for the MVL depots system in vitro. An in vivo pharmacokinetic study mimicking the early postoperative IP chemotherapy regimen in rats showed significantly improved bioavailability, and the mean residence time of oxaliplatin after IP administration revealed that slow and continuous erosion of the MVL particles yielded a sustained drug release. Thus, oxaliplatin-loaded MVL depots presented in this study have potential for use in the treatment of colorectal cancer.

scholarly journals Effect of A 2-HP-β-Cyclodextrin Formulation on the Biological Transport and Delivery of Chemotherapeutic PLGA Nanoparticles

2020 ◽  
Author(s):  
Kangyu Zheng ◽  
Zeju Huang ◽  
Jiaying Huang ◽  
Xiangmei Liu ◽  
JUNFENG BAN ◽  
...  
Keyword(s):  
Drug Release ◽  
Cellular Uptake ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Human Lung Cancer ◽  
Pharmacokinetic Analysis ◽  
Biological Transport ◽  
Sustained Drug Release

Abstract Background: The aim of this work was to develop a novel and feasible modification strategy by utilizing the supramolecular effect of 2-hydroxypropyl-beta-cyclodexrin (2-HP-β-CD) for enhancing the biological transport efficiency of paclitaxel (PTX)-loaded poly(lactide-co-glycolide)(PLGA) nanoparticles.Methods: PTX-loaded 2-HP-β-CD-modified PLGA nanoparticles (2-HP-β-CD/PLGA NPs) were prepared using the modified emulsion method. Nano-characteristics, drug release behavior, in vitro cytotoxicity, cellular uptake profiles and in vivo bio-behavior of the nanoparticles were then characterized. Results: Compared with the plain PLGA NPs, 2-HP-β-CD/PLGA NPs exhibited smaller particle sizes (151.03±1.36 nm), increased entrapment efficiency (~49.12% increase) and sustained drug release. When added to A549 human lung cancer cells, compared with PLGA NPs, 2-HP-β-CD/PLGA NPs exhibited higher cytotoxicity in MTT assays and improved cellular uptake efficiency. Pharmacokinetic analysis showed that the AUC value of 2-HP-β-CD/PLGA NPs was 2.4-fold higher than commercial Taxol® and 1.7-fold higher than plain PLGA NPs. In biodistribution assays, 2-HP-β-CD/PLGA NPs exhibited excellent stability in the circulation.Conclusions: The results of this study suggest that formulation contains 2-HP-β-CD can prolong PTX release, enhance drug transpot efficiency and serve as a potential tumor targeting system for PTX.

Development of Biodegradable Injectable In situ Forming Implants for Sustained Release of Lornoxicam

2018 ◽  
Vol 16 (1) ◽  
pp. 66-78 ◽  
Author(s):  
Ruby Christian ◽  
Vaishali Thakkar ◽  
Tushar Patel ◽  
Mukesh Gohel ◽  
Lalji Baldaniya ◽  
...  
Keyword(s):  
Plasma Concentration ◽  
Drug Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Maximum Plasma ◽  
Sustained Drug Release ◽  
Drug Entrapment Efficiency ◽  
Ft Ir

Objective: The focus of this study was to develop in situ injectable implants of Lornoxicam which could provide sustained drug release. Methods: Biodegradable in situ injectable implants were prepared by polymer precipitation method using polylactide-co-glycolide (PLGA). An optimized formulation was obtained on the basis of drug entrapment efficiency, gelling behavior and in vitro drug release. The compatibility of the formulation ingredients were tested by Fourier transform infrared (FT-IR) spectroscopy, and differential scanning colorimetry (DSC). SEM study was performed to characterize in vivo behavior of in situ implant. Pharmacokinetic study and in vivo gelling study of the optimized formulation were performed on Sprague-Dawley rats. Stability testing of optimized formulation was also performed. Results: The drug entrapment efficiency increased and burst release decreased with an increase in the polymer concentration. Sustained drug release was obtained up to five days. SEM photomicrographs indicated uniform gel formation. Chemical interaction between the components of the formulation was not observed by FT-IR and DSC study. Pharmacokinetic studies of the optimized formulation revealed that the maximum plasma concentration (Cmax), time to achieve Cmax (Tmax) and area under plasma concentration curve (AUC) were significantly higher than the marketed intramuscular injection of lornoxicam. Stability study of optimized batch showed no change in physical and chemical characteristics. Conclusion: Lornoxicam can be successfully formulated as in situ injectable implant that provides long-term management of inflammatory disorders with improved patient compliance.

scholarly journals Formulation and Optimization of Sustained Release Stavudine Microspheres Using Response Surface Methodology

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Sanjay Dey ◽  
Soumen Pramanik ◽  
Ananya Malgope
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Entrapment Efficiency ◽  
Sustained Drug Release ◽  
Independent Variables ◽  
Optimum Formulation ◽  
Dependent Variables ◽  
High Entrapment Efficiency ◽  
Full Factorial

The aim of the current study was to formulate and optimize the formulation on the basis of in vitro performance of microsphere. A full factorial design was employed to study the effect of independent variables, polymer-to-drug ratio () and stirring speed (), on dependent variables, encapsulation efficiency, particle size, and time to 80% drug release. The best batch exhibited a high entrapment efficiency of 70% and mean particle size 290 μm. The drug release was also sustained for more than 12 hours. The study helped in finding the optimum formulation with excellent sustained drug release.

scholarly journals Preparation and Release Profiles in Vitro/Vivo of Galantamine Pamoate Loaded Poly (Lactideco-Glycolide) (PLGA) Microspheres

2021 ◽  
Vol 11 ◽  
Author(s):  
Liping Du ◽  
Shankui Liu ◽  
Guizhou Hao ◽  
Li Zhang ◽  
Miaomiao Zhou ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Solvent Evaporation Method ◽  
Sustained Drug Release ◽  
Water Emulsion ◽  
Oil Water

Patient’s poor compliance and the high risk of toxic effects limit the clinical use of galantamine hydrobromide. To overcome these drawbacks, the sustained-release galantamine pamoate microspheres (GLT-PM-MS) were successfully developed using an oil/water emulsion solvent evaporation method in this study. Physicochemical properties of GLT-PM-MS were carefully characterized, and the in vitro and in vivo drug release behaviors were well studied. Results showed that the morphology of optimized microspheres were spherical with smooth surfaces and core-shell interior structure. Mean particle size, drug loading and entrapment efficiency were 75.23 ± 1.79 μm, 28.01 ± 0.81% and 87.12 ± 2.71%, respectively. The developed GLT-PM-MS were found to have a sustained release for about 24 days in vitro and the plasma drug concentration remained stable for 17 days in rats. These results indicated that GLT-PM-MS could achieve the sustained drug release purpose and be used in clinical trial.

scholarly journals Formulation and Invitro characterization of Flurbiprofen loaded Nanosponges

2021 ◽  
Vol 12 (3) ◽  
pp. 1798-1802
Author(s):  
Gangadhara R. ◽  
Satheesh K. P. ◽  
Devanna N. ◽  
Sasikala L. ◽  
Vandavasi Koteswara Rao
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Guar Gum ◽  
Entrapment Efficiency ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Topical Gel ◽  
High Entrapment Efficiency

The aim of this analysis is to see how effective a Nanosponge-loaded topical gel is at distributing flurbiprofen through the skin. Flurbiprofen was entrapped in Nanosponge and formulated into a gel for this purpose. Flurbiprofen Nanosponges were developed by solvent evaporation using pluronic F68 and ethyl cellulose. The particle size and entrapment quality were discovered to be in the range of 200-410 nm and 90.94% to 98.68%, respectively. For gel formulation, Nanopsonges with high entrapment efficiency and the smallest particle size (F3) were chosen based on the characterization. Using Guar gum, Carbopol, and HPMC K4M, a total of 6 formulations were produced to determine the sustained drug release and were tested for physiochemical tests, producing positive results. According to the findings of the above in vitro drug release trials, formulations containing carbopol release more drug at the end of 11 hours than other formulations and follow a zero-order with case II transport mechanism.

scholarly journals Development and Characterization of Mitoxantrone-Loaded Glutaraldehyde Crosslinked Sodium Alginate Nanoparticles for the Delivery of Anticancer Drugs

2021 ◽  
pp. 18-24
Author(s):  
Muhammad Wahab Amjad ◽  
Maria Abdul Ghafoor Raja
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Anticancer Drugs ◽  
Antineoplastic Agent ◽  
Entrapment Efficiency ◽  
Sustained Drug Release ◽  
Drug Entrapment Efficiency

Every year millions of new cases of various types of cancers are diagnosed, leading to an alarming rate of fatalities. Mitoxantrone is an anthracenedione antineoplastic agent which is used in the treatment of various types of cancer, mostly acute myeloid leukemia and prostate cancer. In spite of its therapeutic applications, it possesses numerous limitations and side effects including specific targeting and systemic toxicity. Sodium alginate is a biodegradable, mucoadhesive and biocompatible polymer commonly used in drug delivery applications. Glutaraldehyde is a saturated dialdehyde and is used as a polymer cross linker. In this study, mitoxantrone-loaded glutaraldehyde-sodium alginate nanoparticles were developed by ionic gelation method and characterized (determination of particle size, drug entrapment efficiency, drug release and its kinetics) for the delivery of anticancer drugs. The nanoparticles mean particle size was found to be within the acceptable range. The entrapment efficiency was also on the higher side with sustained drug release. The findings of this study reveal promising potential of delivery system and project the way forward for further in vitro and in vivo investigations.

scholarly journals A Long-Acting BMP-2 Release System Based on Poly(3-hydroxybutyrate) Nanoparticles Modified by Amphiphilic Phospholipid for Osteogenic Differentiation

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Xiaochun Peng ◽  
Yunsu Chen ◽  
Yamin Li ◽  
Yiming Wang ◽  
Xianlong Zhang
Keyword(s):  
Osteogenic Differentiation ◽  
Delivery System ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Solvent Evaporation Method ◽  
Gene Markers ◽  
Long Acting ◽  
High Entrapment Efficiency

We explored a novel poly(3-hydroxybutyrate) (PHB) nanoparticle loaded with hydrophilic recombinant human BMP-2 with amphiphilic phospholipid (BPC-PHB NP) for a rapid-acting and long-acting delivery system of BMP-2 for osteogenic differentiation. The BPC-PHB NPs were prepared by a solvent evaporation method and showed a spherical particle with a mean particle size of 253.4 nm, mean zeta potential of −22.42 mV, and high entrapment efficiency of 77.18%, respectively. For BPC-PHB NPs, a short initial burst release of BMP-2 from NPs in 24 h was found and it has steadily risen to reach about 80% in 20 days forin vitrotest. BPC-PHB NPs significantly reduced the burst release of BMP-2, as compared to that of PHB NPs loading BMP-2 without PL (B-PHB NPs). BPC-PHB NPs maintained the content of BMP-2 for a long-term osteogenic differentiation. The OCT-1 cells with BPC-PHB NPs have high ALP activity in comparison with others. The gene markers for osteogenic differentiation were significantly upregulated for sample with BPC-PHB NPs, implying that BPC-PHB NPs can be used as a rapid-acting and long-acting BMP-2 delivery system for osteogenic differentiation.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

scholarly journals Long-Acting Risperidone Dual Control System: Preparation, Characterization and Evaluation In Vitro and In Vivo

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1210
Author(s):  
Xieguo Yan ◽  
Shiqiang Wang ◽  
Kaoxiang Sun
Keyword(s):  
Drug Loading ◽  
Entrapment Efficiency ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
In Vivo Evaluation ◽  
Long Term Treatment ◽  
Long Acting

Schizophrenia, a psychiatric disorder, requires long-term treatment; however, large fluctuations in blood drug concentration increase the risk of adverse reactions. We prepared a long-term risperidone (RIS) implantation system that can stabilize RIS release and established in-vitro and in-vivo evaluation systems. Cumulative release, drug loading, and entrapment efficiency were used as evaluation indicators to evaluate the effects of different pore formers, polymer ratios, porogen concentrations, and oil–water ratios on a RIS implant (RIS-IM). We also built a mathematical model to identify the optimized formulation by stepwise regression. We also assessed the crystalline changes, residual solvents, solubility and stability after sterilization, in-vivo polymer degradation, pharmacokinetics, and tissue inflammation in the case of the optimized formulation. The surface of the optimized RIS microspheres was small and hollow with 134.4 ± 3.5 µm particle size, 1.60 SPAN, 46.7% ± 2.3% implant drug loading, and 93.4% entrapment efficiency. The in-vitro dissolution behavior of RIS-IM had zero-order kinetics and stable blood concentration; no lag time was released for over three months. Furthermore, the RIS-IM was not only non-irritating to tissues but also had good biocompatibility and product stability. Long-acting RIS-IMs with microspheres and film coatings can provide a new avenue for treating schizophrenia.

Sign in / Sign up

Export Citation Format

Share Document