scholarly journals Effect of A 2-HP-β-Cyclodextrin Formulation on the Biological Transport and Delivery of Chemotherapeutic PLGA Nanoparticles

2020 ◽  
Author(s):  
Kangyu Zheng ◽  
Zeju Huang ◽  
Jiaying Huang ◽  
Xiangmei Liu ◽  
JUNFENG BAN ◽  
...  
Keyword(s):  
Drug Release ◽  
Cellular Uptake ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Human Lung Cancer ◽  
Pharmacokinetic Analysis ◽  
Biological Transport ◽  
Sustained Drug Release

Abstract Background: The aim of this work was to develop a novel and feasible modification strategy by utilizing the supramolecular effect of 2-hydroxypropyl-beta-cyclodexrin (2-HP-β-CD) for enhancing the biological transport efficiency of paclitaxel (PTX)-loaded poly(lactide-co-glycolide)(PLGA) nanoparticles.Methods: PTX-loaded 2-HP-β-CD-modified PLGA nanoparticles (2-HP-β-CD/PLGA NPs) were prepared using the modified emulsion method. Nano-characteristics, drug release behavior, in vitro cytotoxicity, cellular uptake profiles and in vivo bio-behavior of the nanoparticles were then characterized. Results: Compared with the plain PLGA NPs, 2-HP-β-CD/PLGA NPs exhibited smaller particle sizes (151.03±1.36 nm), increased entrapment efficiency (~49.12% increase) and sustained drug release. When added to A549 human lung cancer cells, compared with PLGA NPs, 2-HP-β-CD/PLGA NPs exhibited higher cytotoxicity in MTT assays and improved cellular uptake efficiency. Pharmacokinetic analysis showed that the AUC value of 2-HP-β-CD/PLGA NPs was 2.4-fold higher than commercial Taxol® and 1.7-fold higher than plain PLGA NPs. In biodistribution assays, 2-HP-β-CD/PLGA NPs exhibited excellent stability in the circulation.Conclusions: The results of this study suggest that formulation contains 2-HP-β-CD can prolong PTX release, enhance drug transpot efficiency and serve as a potential tumor targeting system for PTX.

scholarly journals Preparation and Evaluation of Intraperitoneal Long-Acting Oxaliplatin-Loaded Multi-Vesicular Liposomal Depot for Colorectal Cancer Treatment

Pharmaceutics ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 736
Author(s):  
Sharif Md Abuzar ◽  
Eun Jung Park ◽  
Yeji Seo ◽  
Juseung Lee ◽  
Seung Hyuk Baik ◽  
...  
Keyword(s):  
Colorectal Cancer ◽  
Drug Release ◽  
Entrapment Efficiency ◽  
Lag Phase ◽  
Burst Release ◽  
Sustained Drug Release ◽  
Long Acting ◽  
High Entrapment Efficiency

Colorectal cancer with peritoneal metastasis has a poor prognosis because of inadequate responses to systemic chemotherapy. Cytoreductive surgery followed by intraperitoneal (IP) chemotherapy using oxaliplatin has attracted attention; however, the short half-life of oxaliplatin and its rapid clearance from the peritoneal cavity limit its clinical application. Here, a multivesicular liposomal (MVL) depot of oxaliplatin was prepared for IP administration, with an expected prolonged effect. After optimization, a combination of phospholipids, cholesterol, and triolein was used based on its ability to produce MVL depots of monomodal size distribution (1–20 µm; span 1.99) with high entrapment efficiency (EE) (92.16% ± 2.17%). An initial burst release followed by a long lag phase of drug release was observed for the MVL depots system in vitro. An in vivo pharmacokinetic study mimicking the early postoperative IP chemotherapy regimen in rats showed significantly improved bioavailability, and the mean residence time of oxaliplatin after IP administration revealed that slow and continuous erosion of the MVL particles yielded a sustained drug release. Thus, oxaliplatin-loaded MVL depots presented in this study have potential for use in the treatment of colorectal cancer.

scholarly journals Preparation and Release Profiles in Vitro/Vivo of Galantamine Pamoate Loaded Poly (Lactideco-Glycolide) (PLGA) Microspheres

2021 ◽  
Vol 11 ◽  
Author(s):  
Liping Du ◽  
Shankui Liu ◽  
Guizhou Hao ◽  
Li Zhang ◽  
Miaomiao Zhou ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Solvent Evaporation Method ◽  
Sustained Drug Release ◽  
Water Emulsion ◽  
Oil Water

Patient’s poor compliance and the high risk of toxic effects limit the clinical use of galantamine hydrobromide. To overcome these drawbacks, the sustained-release galantamine pamoate microspheres (GLT-PM-MS) were successfully developed using an oil/water emulsion solvent evaporation method in this study. Physicochemical properties of GLT-PM-MS were carefully characterized, and the in vitro and in vivo drug release behaviors were well studied. Results showed that the morphology of optimized microspheres were spherical with smooth surfaces and core-shell interior structure. Mean particle size, drug loading and entrapment efficiency were 75.23 ± 1.79 μm, 28.01 ± 0.81% and 87.12 ± 2.71%, respectively. The developed GLT-PM-MS were found to have a sustained release for about 24 days in vitro and the plasma drug concentration remained stable for 17 days in rats. These results indicated that GLT-PM-MS could achieve the sustained drug release purpose and be used in clinical trial.

scholarly journals Development and Characterization of Mitoxantrone-Loaded Glutaraldehyde Crosslinked Sodium Alginate Nanoparticles for the Delivery of Anticancer Drugs

2021 ◽  
pp. 18-24
Author(s):  
Muhammad Wahab Amjad ◽  
Maria Abdul Ghafoor Raja
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Anticancer Drugs ◽  
Antineoplastic Agent ◽  
Entrapment Efficiency ◽  
Sustained Drug Release ◽  
Drug Entrapment Efficiency

Every year millions of new cases of various types of cancers are diagnosed, leading to an alarming rate of fatalities. Mitoxantrone is an anthracenedione antineoplastic agent which is used in the treatment of various types of cancer, mostly acute myeloid leukemia and prostate cancer. In spite of its therapeutic applications, it possesses numerous limitations and side effects including specific targeting and systemic toxicity. Sodium alginate is a biodegradable, mucoadhesive and biocompatible polymer commonly used in drug delivery applications. Glutaraldehyde is a saturated dialdehyde and is used as a polymer cross linker. In this study, mitoxantrone-loaded glutaraldehyde-sodium alginate nanoparticles were developed by ionic gelation method and characterized (determination of particle size, drug entrapment efficiency, drug release and its kinetics) for the delivery of anticancer drugs. The nanoparticles mean particle size was found to be within the acceptable range. The entrapment efficiency was also on the higher side with sustained drug release. The findings of this study reveal promising potential of delivery system and project the way forward for further in vitro and in vivo investigations.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

Formulation development of folic acid conjugated PLGA nanoparticles for improved cytotoxicity of Caffeic acid phenethyl ester

2021 ◽  
Vol 09 ◽  
Author(s):  
Harshad S Kapare ◽  
Sathiyanarayanan L ◽  
Arulmozhi S ◽  
Kakasaheb Mahadik
Keyword(s):  
Folic Acid ◽  
Drug Release ◽  
Caffeic Acid ◽  
Caffeic Acid Phenethyl Ester ◽  
Therapeutic Effects ◽  
Formulation Development ◽  
Sustained Drug Release ◽  
Active Constituent

Background: Honey bee propolis is one of the natural product reported in various traditional systems of medicines including Ayurveda. Caffeic acid phenethyl ester (CAPE) is an active constituent of propolis which is well known for its anticancer potential. The therapeutic effects of CAPE are restricted owing to its less aqueous solubility and low bioavailability. Objective: In this study CAPE loaded folic acid conjugated nanoparticle system (CLFPN) was investigated to enhance solubility, achieve sustained drug release and improved cytotoxicity of CAPE. Methods: Formulation development, characterization and optimization were carried out by design of experiment approach. In vitro and in vivo cytotoxicity study was carried out for optimized formulations. Results: Developed nanoparticles showed particle size and encapsulation efficiency of 170 ± 2 - 195 ± 3 nm and 75.66 ± 1.52 - 78.80 ± 1.25 % respectively. Optimized formulation CLFPN showed sustained drug release over a period of 42 h. GI50 concentration was decreased by 46.09% for formulation as compared to CAPE in MCF-7 cells indicating targeting effect of CLFPN. An improved in vitro cytotoxic effect was reflected in in-vivo Daltons Ascites Lymphoma model by reducing tumor cells count. Conclusion: The desired nanoparticle characteristic with improved in vivo and in vitro cytotoxicity was shown by developed formulation. Thus it can be further investigated for biomedical applications.

scholarly journals Formulation, Development and Evaluation of Ibuprofen Loaded Nano-transferosomal Gel for the Treatment of Psoriasis

2019 ◽  
pp. 1-8
Author(s):  
Marwa H. Abdallah ◽  
Amr S. Abu Lila ◽  
Md. Khalid Anwer ◽  
El-Sayed Khafagy ◽  
Muqtader Mohammad ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Vesicle Size

The present work was aimed to develop a transferosomal gel of ibuprofen (IBU) for the amelioration of psoriasis like inflammation. Three formulation of IBU loaded transferosomes (TFs1-TFs3) were prepared using different proportions of lipid (phospholipon 90H) and surfactant (tween 80) and further evaluated for vesicle size, zeta potential (ZP), entrapment efficiency and in vitro drug release. The IBU loaded transferosomes (TFs2) was optimized with vesicle size (217±8.4 nm), PDI (0.102), ZP (-31.5±4.3 mV), entrapment efficiency (88.4±6.9%) and drug loading (44.2±2.9%). Further, the optimized IBU loaded transferosomes (TFs2) was incorporated into 1% carbopol 934 gel base and characterized for homogeneity, extrudability, viscosity and drug content. The in vivo pharmacodynamic study of gel exhibited reduction in psoriasis like inflammation in mice. The ibuprofen loaded transferosomal gel was successfully developed and has shown the potential to be a new therapy against psoriasis like inflammation.

Preparation, Characterization and Optimization of Irbesartan Loaded Solid Lipid Nanoparticles for Oral Delivery

2021 ◽  
pp. 97-104
Author(s):  
Kumara Swamy S ◽  
Ramesh Alli
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Oral Bioavailability ◽  
Oral Delivery ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Sustained Drug Release ◽  
Bioavailability Enhancement ◽  
Solid Lipid

The purpose of this study was to develop and evaluate irbesartan (IS) loaded solid lipid nanoparticles (SLNs; IS-SLNs) that might enhance the oral bioavailability of IS. IS, an angiotensin-receptor antagonist, used to treat hypertension. However, poor aqueous solubility and poor oral bioavailability has limited therapeutic applications of IS. Components of the SLNs include either of trimyristin/tripalmitin/tristearin/trilaurate/stearic acid/beeswax, and surfactants (Poloxamer 188 and soylecithin). The IS-SLNs were prepared by hot homogenization followed by ultrasonication method and evaluated for particle size, poly dispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE), drug content and in vitro drug release. The physical stability of optimized formulation was studied at refrigerated and room temperature for two months. The optimized IS-SLN formulation (F4) had a mean diameter of about 217.6±3.62 nm, PDI of 0.163±0.032, ZP of -28.5±4.12, assay of 99.8±0.51 and EE of 93.68±2.47%. The formulation showed sustained drug release compared with control formulation over 24 h. Optimized formulation was found to be stable over two months. IS-SLN showed nearly spherical in shape using and converted to amorphous form by DSC. Thus, the results conclusively demonstrated SLNs could be considered as an alternative delivery system for the oral bioavailability enhancement of IS.

scholarly journals DEVELOPMENT OF RITONAVIR LOADED NANOPARTICLES: IN VITRO AND IN VIVO CHARACTERIZATION

2018 ◽  
Vol 11 (3) ◽  
pp. 284
Author(s):  
Pravin S Patil ◽  
Shashikant C Dhawale
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Dissolution Rate ◽  
Drug Carrier ◽  
Entrapment Efficiency ◽  
Significant Rise ◽  
Scanning Calorimetry ◽  
In Vitro Drug Release

 Objective: The purpose of the present investigation was to develop a nanosuspension to improve dissolution rate and oral bioavailability of ritonavir.Methods: Extended-release ritonavir loaded nanoparticles were prepared using the polymeric system by nanoprecipitation technique. Further, the effect of Eudragit RL100 (polymeric matrix) and polyvinyl alcohol (surfactant) was investigated on particle size and distribution, drug content, entrapment efficiency, and in vitro drug release from nanosuspension where a strong influence of polymeric contents was observed. Drug-excipient compatibility and amorphous nature of drug in prepared nanoparticles were confirmed by Fourier transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction studies, respectively.Results: Hydrophobic portions of Eudragit RL100 could result in enhanced encapsulation efficiency. However, increase in polymer and surfactant contents lead to enlarged particle size proportionately as confirmed by transmission electron microscopy. Nanosuspension showed a significant rise in dissolution rate with complete in vitro drug release as well as higher bioavailability in rats compared to the pure drug.Conclusion: The nanoprecipitation technique used in present research could be further explored for the development of different antiretroviral drug carrier therapeutics.

Plasmonic CuS nanodisk assembly based composite nanocapsules for NIR-laser-driven synergistic chemo-photothermal cancer therapy

2018 ◽  
Vol 6 (7) ◽  
pp. 1035-1043 ◽  
Author(s):  
Jian He ◽  
Lisha Ai ◽  
Xin Liu ◽  
Hao Huang ◽  
Yuebin Li ◽  
...  
Keyword(s):  
Cancer Therapy ◽  
Drug Release ◽  
Cancer Cells ◽  
Therapeutic Effects ◽  
Release Behavior ◽  
Sustained Drug Release ◽  
Drug Release Behavior ◽  
Nir Laser

The NIR-laser-driven plasmonic photothermal and sustained drug release behavior of CuS–PTX/SiO2 nanocapsules show great synergistic chemo-photothermal therapeutic effects on cancer cells in vitro and in vivo.

Sign in / Sign up

Export Citation Format

Share Document